BT SYNERGY 4500 manual Call Waiting, Callers

Synergy 4500 – Issue 5 – Edition 1 – 18.01.07 – 7993

BT Calling Features 59

Call Waiting

With Call Waiting, during a call, if another caller is trying to reach you, you will hear a soft beep every 5 seconds.

If you have also subscribed to a Caller Display Service, the caller’s number (or name if stored in the Directory) will be shown on the display for 20 seconds, after this time the display will return to your first caller’s details.

Instead of the engaged tone, the second caller will hear an announcement to hold as you are aware that they are waiting.

To use Call Waiting

To answer the second call, without disconnecting from your first caller:

1.	Press	R	. The first caller will be put on hold.
		Int
2.	Press	R	again to return to the first caller, and then
		Int
	press it each time you want to switch between the two

callers.

To disconnect the first call and take the waiting call:

1.Press to end the call with the first caller. The handset will then ring.

2.Press and continue your conversation with the second caller.

IMPORTANT

To use Call Waiting you must first subscribe to the service from your network provider. A quarterly fee is payable.

For more information on BT Calling Features call BT free on 0800 800 150.

The Call Waiting beep is not audible to the person you are speaking to.

If you experience any problems, please call the Helpline on 0870 605 8047 or email bt.helpdesk@suncorptech.com