BT SYNERGY 4500 manual Select Option, Use Menu Or Menu to select Access code and press OK

Synergy 4500 – Issue 5 – Edition 1 – 18.01.07 – 7993

		Using the phone	29
Access code		If your BT Synergy 4500 is
		connected to a switchboard, you
1. Select	option.	may need to enter an access code
		in the dialling sequence to be able
2. Use Menu	or Menu to select Access code and press OK.	to connect to the outside line.
3. On and Off are displayed as options. Either, select On to		The access code will not be used
		when you dial the number yourself
activate prefix dialling. Code: is displayed. Enter the		(rather than for example from the
prefix you require, e.g. 9 and select OK. You will hear a		phonebook) to allow you to make
		calls to other switchboard
confirmation beep and the display will return to the
		extensions.
phonebook menu. Or, select Off to deactivate prefix
dialling. The display will return to the phonebook menu.
Change the SIM Code

1.Select option. The phonebook entry you used last is displayed.

2.Select Opt, then use Menu or Menu to display SIM Code and select OK.

3.Use Menu or Menu to select either Country Code, National Code or International Code and select OK.

4.Using the keypad, enter the dialling code and select Save. You hear a confirmation beep.

5.Press and hold to exit and return to standby.4. Use

Menu or Menu to select either Country Code, National Code or International Code and select OK.

SIM Country Code These settings control the conversion of numbers from mobile format which may include +44 and may have the 0 removed from the area code. You should not normally need to alter these settings if you are using your BT Synergy 4500 in the UK and your mobile to call UK numbers. If this is not the case, then please call the BT Synergy 4500 Helpline for assistance on 0870 605 8047.

If you experience any problems, please call the Helpline on 0870 605 8047 or email bt.helpdesk@suncorptech.com