Making a Group Connect Call On-the-Fly

1.Press Menu>Contacts>AddNew>NewGroup.

2.Press Start (left softkey) to add Contacts entries with DC-capable numbers to the group.

When adding a contact for the Group Connect call, make sure you highlight the entry’s DC-capable number (DCOnly or Mobile+DC).

3.When you have finished selecting entries, press the Direct Connect button.

4.Continue the Group Connect call as described previously.

Joining or Rejoining a Group Connect Call

If you are not available at the beginning of a Group Connect call, or if you drop off the call temporarily, you can rejoin an in-progress Group Connect call.

1.Press Menu>History.

2.Select the call and press the Direct Connect button.

3.Continue the Group Connect call as described previously.

Tip

You can also join or rejoin a Group Connect call from

Connect

 

your Contacts list if the group has been stored.

 

 

 

Select the group entry and press the Direct Connect

 

 

button.

Direct

Note

If the Group Connect call has already ended,

 

pressing the Direct Connect button initiates a new

 

 

Group Connect call.

 

If you do not want to participate in a Group Connect call, press END.

To see an updated number of group participants after rejoining a call, press the Direct Connect button.

Setting Group Termination Options

1.Press Menu>Settings>DirectConnect>GroupCall Options.

2.Select an option and press .

Endthecallforeveryone: terminates the call session for all connected members.

Allowthecalltocontinue: keeps the call active even after you hang up. The call will remain active until the last members disconnect.

Section 2B. Nextel Direct Connect

51

Page 67
Image 67
Samsung Z400 manual Making a Group Connect Call On-the-Fly, Joining or Rejoining a Group Connect Call