Samsung Z400 manual Answering Calls, If Call Answer is set to either Anykey or Talkkey

2secPause: Enter one or more digits and press Options (right softkey). Select 2secPause to insert a two-second pause and enter additional numbers and pauses as needed. (See “Dialing and Saving Phone Numbers With Pauses” on page 32.)

SetDCDomain: This option is reserved for future changes to Direct Connect functionality. Please do NOTalter this setting or Direct Connect service will cease to function.

Answering Calls

1.Make sure your phone is on. (If your phone is off, incoming calls go to voicemail.)

2.Press to answer an incoming call. (Depending on your settings, you may also answer incoming calls by opening the phone or by pressing any number key. See “Call Answer Mode” on page 75 for more information.)

Your phone notifies you of incoming calls in the following ways:

The phone rings or vibrates.

The backlight illuminates.

The screen displays an incoming call message.

If the incoming call is from a number stored in your Contacts, the entry’s name is displayed. The caller’s phone number may also be displayed, if available.

If Call Answer is set to either Anykey or Talkkey

the following options are also displayed. To select an option, press the corresponding softkey.

Silence (left softkey) to mute the ringer.

Ignore (right softkey) to send the call to your voicemail box.

Phone Basics

Section 2A. Phone Basics 27