Samsung Z400 manual Using Call Alerts, Preset Text Feature With Call Alert, TosendaCallAlert

Using Call Alerts

Call Alerts let you notify someone that you want to communicate with them using Direct Connect. When a user receives a Call Alert, pressing the Direct Connect button places a Direct Connect call directly to the sender.

Note	Call Alerts continue to repeat for a set amount of
	time (default is five minutes) or until the recipient
	returns the call or dismisses the alert. The default Call
	Alert time can be adjusted in the Settings > Direct
	Connect > Call Alerts > Repetition menu.

TosendaCallAlert:

1.Enter a Direct Connect number or select a number from History or Contacts.

Note	When sending a Call Alert, make sure you select the
	Direct Connect number for the person you are trying
	to reach. See “To tell if a number is a valid Direct
	Connect number:” on page 42.

2. Press Msg/Alert (left softkey) and select CallAlert.
	(A prompt is displayed.)		Connect
3.	recipient’s phone will emit an incoming tone and
	Press and release the Direct Connect button. (The
	display an alert.)		Direct
Tip		If you get an error message saying that your contact
		“is not reachable via Direct Connect” or “this number
		is not DC capable,” please check to see that you
		have highlighted a valid Direct Connect number. See
		“To tell if a number is a valid Direct Connect number:”
		on page 42.

Preset Text Feature With Call Alert

From the Call Alert prompt (see step 2 above), you may attach a brief preset text message.

Press the navigation key right or left from the prompt to scroll through available messages. When the desired message is displayed, proceed to step 3 above.

Section 2B. Nextel Direct Connect 47