Sprint Service
Section 3A. Sprint Service Features: The Basics 157
Playing an SMS Voice Message1. Press Menu > Messaging > VoiceSMS > Inbox.
䡲 indicates an unplayed SMS Voice message.
䡲 indicates an SMS Voice message you have
already listened to.
2. Select the message you want to play.
3. Press to play the message. (To display the
message options, press Options [right softkey].)
Composing SMS Voice Messages1. Press Menu > Messaging > Send Message > VoiceSMS
and select the entry method you prefer:
䡲Contacts to select a recipient from your Contacts
(qualifying Contacts entries must contain a
wireless phone number or an email address).
䡲Mobile # to use the keypad to enter a wireless
phone number directly.
䡲Email to enter the recipient’s email address.
2. Press Done (left softkey) when you have finished
selecting and entering recipients.
3. Press Next (left softkey) and start recording after the
beep. (You can record up to two minutes.)
4. To finish recording, press Done (left softkey).
5. Press Send (left softkey).
6. Enter a name to identify yourself and press Done
(left softkey) to send the voice message.
Note If you select No during step 2 above, you will see an
alert message. If you select No after reading the
message, incoming SMS Voice messages will not be
downloaded to your phone.
Z400.book Page 157 Monday, April 7, 2008 8:06 PM