Samsung Z400 manual Answering Direct Connect Calls, Ending a Direct Connect Call

Answering Direct Connect Calls

When you receive a Direct Connect call, you hear an incoming tone or the phone vibrates, depending on your settings. The Direct Connect number and the caller's name (if available) will appear on your screen. You may also hear the caller’s voice through the speakerphone. Speakerphone is turned on by default for Direct Connect calls. You can turn the speakerphone off and listen to Direct Connect calls through the earpiece as you would a regular call, or you can listen through a headset.

1.Press the speakerphone button to either enable or disable the Direct Connect speakerphone feature.

If the Direct Connect speakerphone is enabled ( ), you will hear the caller’s voice through the speakerphone on the front of the phone.

If the Direct Connect speakerphone is disabled

( ), you will only hear the caller’s voice through the earpiece.

2.Accept the incoming call. If available, the caller’s name and Direct Connect number also appear on the display.

3.When the caller has finished speaking, a tone sounds and “Open” appears on the display.

4.Press and hold the Direct Connect button and wait for a tone to sound and a message (“Me”) to appear onscreen. Continue the Direct Connect call as described previously.

Tip	Press END to dismiss an incoming Direct Connect
	call.

Ending a Direct Connect Call

Press .

Tip	Quieting incoming calls and increasing your privacy.
	When you are in an area where incoming Direct
	Connect calls may disturb others, or if you wish to
	increase the privacy of your calls, please set your
	speakerphone to Off and your ringer to vibrate. When
	the speakerphone is off, Direct Connect calls use the
	phone’s earpiece and microphone, while still utilizing
	the Direct Connect button. You may also use an
	earbud or other hands-free device for increased
	convenience.

Direct Connect

Section 2B. Nextel Direct Connect 45