Samsung Z400 manual Send a Message, Using Choice Lists, Resetting Voice Recognition

Note	It is recommended that you perform the complete
	Adapt Voice session at least once to achieve the
	maximum benefit of this feature. If a partial
	adaptation is performed, you can always return later
	and resume the process from the halfway point.

Resetting Voice Recognition

1.Press Menu > Tools > VoiceService>Set (left softkey) >TrainMode.

2.Select ResetVoice and press . (The phone displays a reset dialog.)

3.Press OK (left softkey) to reset the voice recognition parameters or Cancel to exit.

Using Choice Lists

If your phone is not confident it has recognized a name or number correctly, it might display a choice list and prompt you with “Call?” followed by the first choice on the list. To confirm the choice, say “Yes,” or to hear the next choice, say “No.” You can also select the correct choice using your keypad. To cancel the command, say “Cancel,” or to say the name or number again, say “Repeat.”

Enabling and Disabling Choice Lists

You can customize whether the Voice Recognition feature displays either a list of top voice recognition choices or automatically dials the first number without displaying a choice list.

ToenableordisablechoicelistsforDigitDial:

1.Press Menu > Tools > VoiceService>Set(left softkey) >ChoiceLists.

2.Select Automatic or AlwaysOffand press .

Send a Message

Use a single voice command to launch messaging on your phone and specify a recipient for the message.

Tosendatextmessage:

1.Press and hold .

2.Say “SendTextMessage.”

114 Section 2I. Voice Services