Husqvarna 6022CH owner manual Service and Adjustments

Page 13

SERVICE AND ADJUSTMENTS

CAUTION: BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS:

1.Release control bar and stop engine.

2.Make sure the blade and all moving parts have completely stopped.

3.Disconnect spark plug wire from spark plug and place where it cannot come in contact with plug.

LAWN MOWER

TO ADJUST CUTTING HEIGHT

See "TO ADJUST CUTTING HEIGHT" in the Operation section of this manual.

REAR DEFLECTOR

The rear deflector, attached between the rear wheels of your mower, is provided to minimize the possibility that objects will be thrown out of the rear of the mower into the operator's mowing position. If the deflector becomes damaged, it should be replaced.

ENGINE

ENGINE SPEED

Your engine speed has been factory set. Do not attempt to increase engine speed or it may result in personal injury. If you believe that the engine is running too fast or too slow, take your lawn mower to an authorized service center for repair and adjustment.

THROTTLE CONTROL

If it becomes necessary to adjust or replace the throttle control, see the adjustment section of your engine manual.

DISCHARGE GUARD

The discharge guard, attached to the discharge opening of your lawn mower, is provided to prevent the possibility of injury resulting from objects being thrown out of the dis- charge opening into the operator mowing position. If the discharge guard becomes damaged, it should be replaced.

TO ADJUST HANDLE (See Fig. 11)

The handle can be mounted in a high or low position. The mounting holes in the bottom of lower handle are off center for raising or lowering the handle.

1.Remove upper handle and all parts attached to lower handle.

2.Remove hairpin cotters from lower handle bracket mount- ing pin.

3.Squeeze lower handle in to remove it from mounting pins.

4.Turn lower handle over to raise or lower handle.

5.Squeeze lower handle in and position holes onto mount- ing pins on handle bracket.

6.Reassemble upper handle and all parts removed from lower handle.

CARBURETOR

The carburetor has been preset at the factory and adjust- ment should not be necessary. However, minor adjustment may be required to compensate for differences in fuel, temperature, altitude or load.

•The air filter must be assembled to the carburetor when running engine.

•Best carburetor adjustment is obtained when fuel tank is 1/4 full.

•In order for the engine to run, the control bar must be held in the operating position. Therefore, and assistant will be required to hold the control bar in the operating position when making final adjustment to the carburetor.

See the Adjustment section of your engine manual for further instruction.

LOWER

HANDLE

ROTATE

FIG. 11

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents 6022CH Safe Operation Practices for Walk-Behind Mowers IV. ServiceGeneral Operation II. Slope OperationTable of Contents Warranty Statement HOW to SET UP Your Lawn Mower AssemblyTo Install Attachments To Remove Lawn Mower from CartonOperation Meets Cpsc Safety RequirementsKnow Your Lawn Mower Simple Steps to Remember When Converting Your Lawn Mower To Adjust Cutting Height See FigEngine Speed See Fig Engine Zone ControlTo Empty Grass Catcher See Fig Before Starting EngineADD OIL See Fig ADD Gasoline See FigTo Stop Engine To Start Engine See FigsMowing Tips Mulching Mowing TipsMaintenance Schedule General Recommendations Lubrication ChartCustomer Responsibilities Before Each USETires Lawn MowerBlade Care Grass CatcherEngine CleaningAIR Filter MufflerService and Adjustments Other StorageFuel System Engine OILProblem Cause Correction Troubleshooting PointsRotary Lawn Mower Model Number 6022CH 6022CHA KEY Part Description

6022CH specifications

The Husqvarna 6022CH is a robust and highly efficient chainsaw designed for both professional and private users who demand power and performance. This versatile tool is perfect for tasks ranging from felling trees to pruning branches, making it an essential addition for anyone in need of reliable cutting capabilities.

One of the standout features of the Husqvarna 6022CH is its lightweight design, which allows for prolonged use without excessive fatigue. The chainsaw weighs in at approximately 4.4 kg, making it easy to maneuver and control, even during extended projects. The ergonomic handle is designed for optimal grip and comfort, providing a secure hold that enhances precision while reducing vibrations for a more enjoyable cutting experience.

Powering the Husqvarna 6022CH is a high-performance 2.0 kW engine. This engine utilizes advanced technology to deliver reliable starting and consistent power output, ensuring that users can tackle various tasks with confidence. The advanced air injection system helps keep the air filter cleaner for longer periods, resulting in less maintenance and an extended lifespan for the chainsaw.

Another critical characteristic of the Husqvarna 6022CH is its efficient chain brake system, providing an added layer of safety for users. This feature helps prevent accidents by quickly halting the chain in the event of kickback, promoting a safer working environment. The tool-less chain tensioning feature allows for quick adjustments, enabling users to easily maintain optimal performance while minimizing downtime.

Moreover, the chainsaw boasts a low vibration technology that significantly reduces the level of vibrations transmitted to the hands and arms of the operator. This feature not only enhances user comfort but also decreases the risk of long-term injuries associated with prolonged use of power tools.

To cater to specific cutting needs, the Husqvarna 6022CH can be fitted with different guide bar lengths. This adaptability is ideal for varying tasks, allowing users to choose the best setup depending on the job. The chainsaw's design also incorporates a quality chain that facilitates smooth and fast cuts, ensuring efficiency and effectiveness with every use.

In summary, the Husqvarna 6022CH is a high-performing chainsaw characterized by its lightweight design, powerful engine, advanced safety features, and low vibration technology. Its adaptability and ease of maintenance make it a top choice for both professionals and homeowners seeking reliability and efficiency in their cutting tasks. Whether for regular yard work or more demanding projects, the Husqvarna 6022CH is designed to meet the needs of a diverse range of users.
Top Page Image Contents