Husqvarna 6022CH Safe Operation Practices for Walk-Behind Mowers, General Operation, IV. Service

Page 2

SAFETY RULES

Safe Operation Practices for Walk-Behind Mowers

IMPORTANT: THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROWING OBJECTS. FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH.

I.GENERAL OPERATION

Read,understand,andfollowallinstructionsonthemachine and in the manual(s) before starting. Be thoroughly familiar with the controls and the proper use of the machine before starting.

Do not put hands or feet near or under rotating parts. Keep clear of the discharge opening at all times.

Only allow responsible individuals, who are familiar with the instructions, to operate the machine.

Clear the area of objects such as rocks, toys, wire, bones, sticks,etc.,whichcouldbepickedupandthrownbytheblade.

Besuretheareaisclearofotherpeoplebeforemowing. Stop machine if anyone enters the area.

Do not operate the mower when barefoot or wearing open sandals. Always wear substantial foot wear.

Do not pull mower backwards unless absolutely necessary. Always look down and behind before and while moving backwards.

Donotoperatethemowerwithoutproperguards,plates,grass catcher or other safety protective devices in place.

See manufacturer’s instructions for proper operation and installation of accessories. Only use accessories approved by the manufacturer.

Stop the blade(s) when crossing gravel drives, walks, or roads.

Stoptheengine(motor)wheneveryouleavetheequipment, before cleaning the mower or unclogging the chute.

Shut the engine (motor) off and wait until the blade comes to complete stop before removing grass catcher.

Mow only in daylight or good artificial light.

Do not operate the machine while under the influence of alcohol or drugs.

Neveroperatemachineinwetgrass. Alwaysbesureofyour footing: keep a firm hold on the handle and walk; never run.

Disengage the self-propelled mechanism or drive clutch on mowers so equipped before starting the engine (motor).

If the equipment should start to vibrate abnormally, stop the engine (motor) and check immediately for the cause. Vibra- tion is generally a warning of trouble.

Always wear safety goggles or safety glasses with side shieldswhenoperatingmower.

II. SLOPE OPERATION

Slopes are a major factor related to slip and fall accidents which can result in severe injury. All slopes require extra caution. If you feel uneasy on a slope, do not mow it.

DO:

Mowacrossthefaceofslopes:neverupanddown. Exercise extreme caution when changing direction on slopes.

Remove obstacles such as rocks, tree limbs, etc.

Watchforholes,ruts,orbumps.Tallgrasscanhideobstacles.

DONOT:

Do not trim near drop-offs, ditches or embankments. The operator could lose footing or balance.

Do not trim excessively steep slopes.

Do not mow on wet grass. Reduced footing could cause slipping.

III. CHILDREN

Tragic accidents can occur if the operator is not alert to the presence of children. Children are often attracted to the machine and the mowing activity. Never assume that children will remain where you last saw them.

Keep children out of the trimming area and under the watchful care of another responsible adult.

Be alert and turn machine off if children enter the area.

Beforeandwhilewalkingbackwards,lookbehindanddownfor small children.

Never allow children to operate the machine.

Useextracarewhenapproachingblindcorners,shrubs,trees, or other objects that may obscure vision.

IV. SERVICE

Useextracareinhandlinggasolineandotherfuels. Theyare flammable and vapors are explosive.

-Use only an approved container.

-Never remove gas cap or add fuel with the engine running. Allow engine to cool before refueling. Do not smoke.

-Never refuel the machine indoors.

-Never store the machine or fuel container inside where there is an open flame, such as a water heater.

Never run a machine inside a closed area.

Never make adjustments or repairs with the engine (motor) running. Disconnect the spark plug wire, and keep the wire away from the plug to prevent accidental starting.

Keepnutsandbolts,especiallybladeattachementbolts,tight and keep equipment in good condition.

Never tamper with safety devices. Check their proper operationregularly.

Keepmachinefreeofgrass,leaves,orotherdebrisbuild-up. Cleanoilorfuelspillage.Allowmachinetocoolbeforestoring.

Stopandinspecttheequipmentifyoustrikeanobject.Repair, if necessary, before restarting.

Never attempt to make wheel height adjustments while the engine(motor)isrunning.

Grasscatchercomponentsaresubjecttowear,damage,and deterioration, which could expose moving parts or allow objects to be thrown. Frequently check components and replacewithmanufacturer’srecommendedparts,whennec- essary.

Mower blades are sharp and can cut. Wrap the blade(s) or wear gloves, and use extra caution when servicing them.

Donotchangetheenginegovernorsettingoroverspeedthe engine.

2

Image 2
Contents 6022CH General Operation IV. ServiceSafe Operation Practices for Walk-Behind Mowers II. Slope OperationTable of Contents Warranty Statement To Install Attachments AssemblyHOW to SET UP Your Lawn Mower To Remove Lawn Mower from CartonKnow Your Lawn Mower Meets Cpsc Safety RequirementsOperation Engine Speed See Fig To Adjust Cutting Height See FigSimple Steps to Remember When Converting Your Lawn Mower Engine Zone ControlADD OIL See Fig Before Starting EngineTo Empty Grass Catcher See Fig ADD Gasoline See FigMowing Tips To Start Engine See FigsTo Stop Engine Mulching Mowing TipsCustomer Responsibilities General Recommendations Lubrication ChartMaintenance Schedule Before Each USEBlade Care Lawn MowerTires Grass CatcherAIR Filter CleaningEngine MufflerService and Adjustments Fuel System StorageOther Engine OILTroubleshooting Points Problem Cause CorrectionRotary Lawn Mower Model Number 6022CH 6022CHA KEY Part Description

6022CH specifications

The Husqvarna 6022CH is a robust and highly efficient chainsaw designed for both professional and private users who demand power and performance. This versatile tool is perfect for tasks ranging from felling trees to pruning branches, making it an essential addition for anyone in need of reliable cutting capabilities.

One of the standout features of the Husqvarna 6022CH is its lightweight design, which allows for prolonged use without excessive fatigue. The chainsaw weighs in at approximately 4.4 kg, making it easy to maneuver and control, even during extended projects. The ergonomic handle is designed for optimal grip and comfort, providing a secure hold that enhances precision while reducing vibrations for a more enjoyable cutting experience.

Powering the Husqvarna 6022CH is a high-performance 2.0 kW engine. This engine utilizes advanced technology to deliver reliable starting and consistent power output, ensuring that users can tackle various tasks with confidence. The advanced air injection system helps keep the air filter cleaner for longer periods, resulting in less maintenance and an extended lifespan for the chainsaw.

Another critical characteristic of the Husqvarna 6022CH is its efficient chain brake system, providing an added layer of safety for users. This feature helps prevent accidents by quickly halting the chain in the event of kickback, promoting a safer working environment. The tool-less chain tensioning feature allows for quick adjustments, enabling users to easily maintain optimal performance while minimizing downtime.

Moreover, the chainsaw boasts a low vibration technology that significantly reduces the level of vibrations transmitted to the hands and arms of the operator. This feature not only enhances user comfort but also decreases the risk of long-term injuries associated with prolonged use of power tools.

To cater to specific cutting needs, the Husqvarna 6022CH can be fitted with different guide bar lengths. This adaptability is ideal for varying tasks, allowing users to choose the best setup depending on the job. The chainsaw's design also incorporates a quality chain that facilitates smooth and fast cuts, ensuring efficiency and effectiveness with every use.

In summary, the Husqvarna 6022CH is a high-performing chainsaw characterized by its lightweight design, powerful engine, advanced safety features, and low vibration technology. Its adaptability and ease of maintenance make it a top choice for both professionals and homeowners seeking reliability and efficiency in their cutting tasks. Whether for regular yard work or more demanding projects, the Husqvarna 6022CH is designed to meet the needs of a diverse range of users.