Husqvarna 961430103 Before Starting Engine, To Empty Grass Catcher See Fig, ADD OIL See Fig

Page 10

OPERATION

TO EMPTY GRASS CATCHER (See Fig. 12)

1.Lift up on grass catcher using the frame handle.

2.Remove grass catcher with clippings from under lawn mower handle.

3.Empty clippings from bag using both frame handle and bag handle.

NOTE: Do not drag the bag when emptying; it will cause unnecessary wear.

GRASS

CATCHER

FRAME

HANDLE

BAG

HANDLE

FIG. 12

BEFORE STARTING ENGINE

ADD OIL (See Fig. 13)

Your lawnmower is shipped without oil in the engine. For type and grade of oil to use, see “ENGINE” in the Maintenance section of this manual.

CAUTION: DO NOT overfill engine with oil, or it will smoke heavily from the muffler on startup.

1.Be sure lawnmower is level.

2.Remove oil dipstick from oil fill spout.

3.You receive a container of oil with the unit. Slowly pour the entire container down the oil fi ll spout into the engine.

NOTE: Initial oil fi ll requires only 18 oz. due to residual oil in engine from the manufacturers 100% quality testing. When changing oil you may need 20 oz.

4. Insert and tighten dipstick.

IMPORTANT:

•Check oil level before each use. Add oil if needed. Fill to full line on dipstick.

•Change the oil after every 25 hours of operation or each season. You may need to change the oil more often under dusty, dirty conditions. See “TO CHANGE EN- GINE OIL” in the Maintenance section of this manual.

GASOLINE

OIL FILL CAP/

FILLER CAP

DIPSTICK

FIG. 13

ADD GASOLINE (See Fig. 13)

•Fill fuel tank to bottom of tank fi ller neck. Do not over- fi ll. Use fresh, clean, regular unleaded gasoline with a minimum of 87 octane. Do not mix oil with gasoline. Purchase fuel in quantities that can be used within 30 days to assure fuel freshness.

CAUTION: Wipe off any spilled oil or fuel. Do not store, spill or use gasoline near an open flame.

Alcohol blended fuels (called gasohol or using ethanol or methanol) can at- tract moisture which leads to separation and formation of acids during storage. Acidic gas can damage the fuel sys- tem of an engine while in storage. To avoid engine problems, the fuel system should be emptied before storage of 30 days or longer. Empty the gas tank, start the engine and let it run until the fuel lines and carburetor are empty. Use fresh fuel next season. See Storage Instructions for additional information. Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Operator’s Manual Manual de Operario II. Slope Operation Safe Operation Practices for Walk-Behind MowersGeneral Operation III. ChildrenTable of Contents To Remove Lawn Mower from Carton AssemblyHOW to SET UP Your Lawn Mower To Unfold Handle See FigsTo Assemble Grass Catcher See Fig Install Starter Rope See FigTo Install Attachments Tighten T-knobOperation Meets Cpsc Safety RequirementsDrive Control Levers used to engage power Know Your Lawn MowerTHROTTLE/ENGINE Control See Fig HOW to USE Your Lawn MowerBlade Control See Fig To Adjust Cutting Height See Fig Drive Control Adjustment See FigDrive Control See Fig Simple Steps to Remember When Converting Your Lawn Mower To Convert MowerADD OIL See Fig Before Starting EngineTo Empty Grass Catcher See Fig ADD Gasoline See FigMowing Tips To Stop Engine See FigTo Start Engine See Fig Mulching Mowing TipsGeneral Recommendations MaintenanceLubrication Chart Before Each USELawn Mower EngineMuffler To Change Engine OIL See FigAIR Filter See Fig Spark PlugClean Under Drive Cover CleaningWater Washout Feature See Fig Service and Adjustments Fuel System StorageOther Engine OILProblem Cause Correction Troubleshooting PointsDoes not start Poor cut Loss of powerWhen starting UnevenConsumer Wheeled Products Limited Warranty HOW to Obtain Service Consumer Wheeled Limited Warranty Chart Consumer Wheeled Limited Warranty Chart II. Operacion Sobre LAS Cuestas OperacionIII. Niños Especificaciones DEL Producto Tabla DE MateriasResponsabilidades DEL Cliente Para Remover LA Segadora DE LA Caja DE Cartón Montaje / PRE-OPERACIÓNComo Preparar SU Segadora Para Desdoblar EL Mango Vea Figs yInstalación DEL Cordón Arrancador Vea Fig Para Montar EL Recogedor DE Césped Vea FigPara Instalar LOS Accesorios Familiarícese CON SU Segadora OperaciónCumple CON LOS Requisitos DE Seguridad DE LA Cpsc Mando Motor Vea Fig Como Usar SU SegadoraControl DE LA Cuchilla Vea Fig Ajuste DEL Mando Vea Fig Control DE LA Impulsión Vea FigPara Ajustar LA Altura DE Corte Vea Fig Para Convertir LA Segadora Pasos Simples DE Recordar Cuando Convierta SU SegadoraAgregue Aceite Vea Fig Antes DE Hacer Arrancar EL MotorPara Vaciar EL Recogedor DE Césped Vea Fig Agregue Gasolina Vea FigConsejos Para Segar Para Parar EL Motor Vea FigPara Hacer Arrancar EL Motor Vea Fig Consejos Para Segar Y AcolcharAntes DE Cada USO MantenimientoRecomendaciones Generales LubricaciónSegadora MotorSilenciador Para Cambiar EL Aceite DEL Motor Vea FigFiltro DE Aire Vea Fig BujíaLimpie Debajo DE LA Cubierta DE LA Impulsión LimpiezaDerrubio DEL Agua Vea Fig Servicio Y Ajustes Sistema DE Combustible AlmacenamientoOtros Aceite DEL MotorSolución DE Problemas Problema Causa CorrecciónFalta de Productos con ruedas para consumidor Garantía limitada Cómo Obtener Servicio 575 49 43-01 W 2012 IR Consumidor Comercial Alquiler Service Notes Notas Servicio 11/22/2013 by

961430104, 961430103 specifications

The Husqvarna 961430103 and 961430104 are part of Husqvarna's renowned line of outdoor power equipment, specifically designed for lawn care and landscaping professionals and enthusiasts alike. These models come equipped with a variety of features that focus on performance, ease of use, and durability, making them a popular choice in the turf maintenance industry.

One of the standout features of the Husqvarna 961430103 and 961430104 is the advanced cutting technology they employ. Both models utilize a powerful engine that delivers high torque, ensuring that users can tackle thick grass and tough terrains with minimal effort. The cutting deck is designed for optimum airflow, which enhances grass collection and leaves behind a cleaner cut for a professional finish.

Both models boast a user-friendly design, including an ergonomic handle that adjusts for comfort and reduces strain during extended use. The intuitive control layout allows for easy operation, enabling users to focus on achieving their landscaping goals without the hassle of complicated mechanisms. Furthermore, the quick-release, foldable design of the handle facilitates convenient storage and transportation.

Durability is a hallmark of Husqvarna's manufacturing standards, and the 961430103 and 961430104 are no exceptions. They feature robust construction materials that can withstand the rigors of frequent use in diverse environments. The models are equipped with heavy-duty wheels that provide excellent traction and stability over uneven ground, enhancing maneuverability and control.

Another notable technology incorporated into these models is the AutoWalk self-propulsion feature. This allows users to maintain a comfortable walking speed without needing to manually push the mower. It automatically adjusts to the user's pace, making it easy to cover large areas quickly and effectively.

The Husqvarna 961430103 and 961430104 also include a high-capacity grass bag, capable of holding a significant amount of clippings, reducing downtime caused by frequent emptying. Additionally, they come equipped with washout ports for easy cleaning of the cutting deck, ensuring optimal performance and longevity of the machine.

In summary, the Husqvarna 961430103 and 961430104 models represent a superior choice for those seeking efficiency, comfort, and durability in their lawn care equipment. With innovative cutting technology, ergonomic design, and durable construction, they are well-suited for both professional landscapers and homeowners looking to maintain a pristine lawn.
Top Page Image Contents