Husqvarna 372 XPG manual Maintenance, General, Carburetor adjustment

Page 30

MAINTENANCE

General

The user must only carry out the maintenance and service work described in this manual.

IMPORTANT! Any maintenance other than that described in this manual must be carried out by your servicing dealer (retailer).

Carburetor adjustment

Due to existing environmental and emissions legislation your chain saw is equipped with movement limiters on the carburetor adjuster screws. These limit the adjustment possibilities to a maximum of a 1/2 turn.

Your Husqvarna product has been designed and manufactured to specifications that reduce harmful emissions.

Function

The carburetor governs the engine’s speed via the throttle control. Air and fuel are mixed in the carburetor. The air/fuel mixture is adjustable. Correct adjustment is essential to get the best performance from the machine.

The setting of the carburetor means that the engine is adapted to local conditions, for example, the climate, altitude, fuel and the type of 2-stroke oil.

The carburetor has three adjustment controls:

-L = Low speed jet

-H = High speed jet

-T = Idle adjustment screw

TH

L

The L and H-jets are used to adjust the supply of fuel to match the rate that air is admitted, which is controlled with the throttle. If they are screwed clockwise the air/fuel ratio becomes leaner (less fuel) and if they are turned anti-clockwise the ratio becomes richer (more fuel). A lean mixture gives a higher engine speed and a rich mixture gives a lower engine speed.

The T-screw regulates the throttle setting at idle speed. If the T-screw is turned clockwise this gives a higher idle speed; turning it anti-clockwise gives a lower idle speed.

Basic settings and running in

The basic carburetor settings are adjusted during testing at the factory. Avoid running at a too high speed for extended periods during the first 10 hours.

CAUTION! If the chain rotates while idling the T-screw must be turned anti-clockwise until the chain stops.

Rec. idle speed: 2700 rpm

Fine adjustment

When the machine has been ”run-in” the carburetor should be finely adjusted. The fine adjustment should be carried out by a qualified person. First adjust the L- jet, then the idling screw T and then the H-jet.

Conditions

Before any adjustments are made the air filter should be clean and the cylinder cover fitted. Adjusting the carburetor while a dirty air filter is in use will result in a leaner mixture next time the filter is cleaned. This can give rise to serious engine damage.

Do not attempt to adjust the L and H jets beyond either stop as this could cause damage.

Now start the machine according to the starting instructions and let it warm up for 10 minutes.

Place the machine on a flat surface so that the bar points away from you and so that the bar and chain do not come into contact with the surface or other objects.

Low speed jet L

Turn the low speed jet L clockwise until it stops. If the engine accelerates poorly or idles unevenly, turn the low speed jet L anticlockwise until good acceleration and idling are achieved.

30 – English

Image 30
Contents Special 372 XP 372 XPG KEY to Symbols Symbols on the machineSymbols in the operator’s manual EPA Contents Introduction Dear customerWhat is WHAT? What is what on the chain saw?General Safety Precautions Before using a new chain sawPersonal protective equipment Machine′s safety equipmentAlways use common sense Chain brake and front hand guardGeneral Safety Precautions Throttle lockout Chain catcherRight hand guard Vibration damping system Stop switchCutting equipment MufflerCutting equipment designed to reduce kickback BarChain Sharpening your chain and adjusting depth gauge setting General information on sharpening cutting teethTensioning the chain Checking chain lubrication Lubricating cutting equipmentFilling with chain oil Chain drive sprocketNeedle bearing lubrication Checking wear on cutting equipmentAssembly Fitting the bar and chainWorking with the chain Fuel Handling FuelTransport and storage Fuel safetyFueling Long-term storageCold engine Starting and StoppingStarting and stopping Warm engineStopping Before use Basic safety rulesWorking Techniques General working instructionsGeneral rules Basic cutting technique TermsLimbing Felling direction Tree felling techniqueSafe distance Clearing the trunk and preparing your retreatDirectional cuts Felling cutHow to avoid kickback What is kickback?Freeing a tree that has fallen badly Cutting the trunk into logs Maintenance Carburetor adjustmentGeneral High speed jet H Fine adjustment of the idling speed TCorrectly adjusted carburetor Checking brake band wearChecking the inertia brake release ImmediatelyMuffler Starter Changing a broken or worn starter cordTensioning the recoil spring Changing a broken recoil spring Air filterSpark plug Fitting the starterLubricating the bar tip sprocket Adjustment of the oil pumpWhen making adjustments Needle bearing lubricationWinter use Air Injection centrifugal cleaningTemperature -5C 23F or colder Heated handlesMaintenance schedule Daily maintenance Weekly maintenance Monthly maintenanceTechnical Data Technical data058/1,5 mm Saw chain filing and file gauges050/1,3 mm Your cutting needFederal Emission Control Warranty Statement Your Warranty Rights and ObligationsEmission Control Warranty Parts List Kickback safety precautions American Standard Safety PrecautionsSafety precautions for chain saw users Other safety precautionsOriginal instructions 1153180-95

372 XPG specifications

The Husqvarna 372 XPG is a powerful, professional-grade chainsaw that stands out in the market due to its superior performance and innovative technology. Designed for demanding tasks such as logging, tree felling, and heavy-duty pruning, the 372 XPG boasts impressive features that cater to professionals seeking reliability and efficiency.

One of the most notable attributes is its robust engine. The 372 XPG is equipped with a 70.1 cc X-Torq engine that delivers exceptional power. This engine design not only optimizes power output but also reduces fuel consumption and emissions, aligning with modern environmental standards. The chainsaw achieves up to 4.8 kW of power, enabling users to tackle the toughest cutting jobs with ease.

Modern technology is incorporated into the 372 XPG to enhance user experience and usability. The chainsaw features the Smart Start system, which allows for effortless starting with minimal resistance on the starter cord. This is especially beneficial for professionals who need to get the job done quickly without the frustration of a difficult start.

Another key feature is the LowVib system, which significantly reduces vibrations during operation. This technology is crucial for minimizing operator fatigue, allowing users to work for extended periods without discomfort. The ergonomic design, combined with a comfortable handle, further enhances user control and precision while cutting.

Durability is a hallmark of the Husqvarna 372 XPG. Constructed with high-quality materials, this chainsaw can withstand the rigors of professional use. Its air filtration system is designed for efficient dust and debris removal, extending the life of the engine and maintaining optimal performance over time.

Safety features are also paramount with this model. It includes a chain brake that activates instantaneously in the event of kickback, ensuring the operator's safety during use.

Overall, the Husqvarna 372 XPG combines power, technology, and durability, making it a favorite among professionals in various cutting applications. Its balanced design, advanced engine, and safety features ensure that it not only meets but exceeds expectations, underscoring Husqvarna's reputation for quality and innovation in outdoor power equipment. Whether you are a professional logger or a landscape contractor, the 372 XPG is engineered to help you achieve your goals effectively and efficiently.