Setup & Adjustments

FRONT CASTER WHEELS

1.Mount front caster wheel assemblies. Installation includes fastening casters to front of the cutter deck using 3/8 x 1" hex head capscrews.

FUEL TANK

1.Mount fuel tank to tank support. Secure with the two tank straps, four 1/4" bolts, and four 1/4" nuts. Tighten until snug, but do not over tighten or crush the tank.

HANDLE ASSEMBLY

1.Align the upper mounting holes in handle with the upper hole in the tank support.

2.Install two 3/8" x 1" screws through matched holes and loosely install 3/8" nuts.

3.Align the lower holes and install hardware as above, tighten upper and lower hardware.

LINKAGE INSTALLATION

1.Install traction linkage to swivels in bellcrank mounted to the tank support on each side of the mower. Traction linkages are located on the upper handle, fastened to the traction levers. To fasten linkage to swivel, first disconnect linkage from traction levers, then screw linkage into swivel. Reassemble linkage into traction lever.

2.Install shifter to transmission with 1/4" x 1" screws. The shifter is located in the inner box and hardware is pre-assembled into the bracket on the transmission.

3.Install blade control rod into the bellcrank on the left side of the tank support. Secure rod with ring type retainer.

4.Refer to the section of this manual on adjustments for the proper adjustment of the linkages you are installing. The linkages were set at the factory but must be checked before operating mower to insure of the proper setting. Always check 100% of the adjust- ments before you operate the mower.

5.Connect the two halves of the wiring harness together. The four prong connectors have a locking tab that shows which way to line them up and guarantees that they are connected properly when the lock snaps.

6.Install the chute deflector to the side of the mower deck. Bolt it into place using the two 5/16" x 1" screws and nuts pre-assembled into the mounting tabs on the deck. Tighten the screws very securely with the chute completely covering the discharge opening and tight against the side of deck.

THROTTLE INSTALLATION

1.Connect the throttle cable end to the throttle mechanism on engine, leaving the cable clamp loose. Push throttle lever on console completely forward. Then pull the cable through the clamp on engine and tighten the cable clamp. Move the throttle lever back and forth to ensure proper installation.

GAS LINE INSTALLATION

1.The gas line is factory installed on the engine.

Attach loose end to fuel tank hose barb and secure with hose clamp.

POSITIONING THE FRONT CASTER SPACERS

1.Using the cutting height chart, find the correct number of spacers to be placed under the caster swivel.

2.Remove the lynch pin and washer from the top of caster and reposition spacers to the desired cutting height from the chart. See figure # 2

AXLE HEIGHT ADJUSTMENT

1.To adjust rear axle, stop engine and place drive levers in the neutral lock position, remove spark plug wire.

2.Remove lower belt shield from underside of rear deck for better access to axle adjustment bolts.

3.Loosen axle pivot bolts and axle adjustment bolts. See figure # 1.

4.Place a jack under center of rear deck raise the jack slightly so axle adjustment bolts may be re- moved.

5.With the jack raise or lower the rear deck to the desired position using the chart to ensure proper height. Reinstall the axle adjustment bolts and tighten.

A tapered punch may be used to help align the holes. See figure #1.

NOTE:

It may be necessary to readjust drive and brake linkages.

NOTE:

To achieve the best quality cut, the blades should be level with the ground or slightly tipped forward

W4815, W3613, W3213, W4815, WG4815P, WG4815P, W3213 specifications

Husqvarna, a brand synonymous with high-quality outdoor power equipment, offers a range of powerful and efficient tools ideal for various landscaping needs. Among their notable products are the Husqvarna WG4815P, W3613, W3213, and W4815 models, each designed with advanced technologies and features to enhance user experience and performance.

The Husqvarna WG4815P is a versatile, gas-powered string trimmer that combines heavy-duty performance with user-friendly features. It is engineered with a robust 48cc engine that delivers impressive power for tackling tough jobs. One standout feature is the Smart Start technology, which ensures easy starting with minimal effort. The WG4815P also boasts an ergonomic design, allowing for comfortable handling during prolonged use.

Next, the Husqvarna W3613 is designed primarily for professional landscapers who demand reliability and efficiency. This model features a high-performance engine for increased torque and power, making it suitable for various applications, from grass trimming to tackling dense brush. The adjustable handle offers customizable comfort, while the dual-line cutting system provides a clean, effective cut every time, reducing the need for frequent maintenance.

The W3213 model continues the trend of reliability with its efficient design and lightweight construction, making it an excellent choice for residential users and beginners. Its easy-start engine, combined with an auto-return stop switch, ensures that it is ready to go whenever you are. The W3213 is particularly notable for its user-friendly controls, making it accessible for those new to outdoor maintenance.

Lastly, the Husqvarna W4815 stands out with its blend of innovative technology and superior performance. Featuring low-vibration technology, it minimizes user fatigue while ensuring precise control during operation. Its advanced cooling system prevents overheating, extending the lifespan of the engine and enhancing overall reliability. The W4815 is equipped with an efficient cutting head that can handle a variety of attachments, allowing for a more versatile gardening experience, from edging lawns to clearing overgrown areas.

All these models reflect Husqvarna's commitment to quality, durability, and performance. With their focus on advanced engineering and user-centric designs, these trimmers are perfect for both enthusiasts and professionals, offering a wide array of features that meet the demands of various landscaping tasks. Whether you choose the WG4815P, W3613, W3213, or W4815, you can be assured of high performance and exceptional results every time.