Operating Instructions, Before Operating

Operating Instructions

BEFORE OPERATING

Be thoroughly familiar with all controls and how to use them before operating the mower. Know beforehand how to stop the engine, drive wheels, and mower blades in preparation for possible emergency.

EMERGENCY STOP

Pull both traction levers firmly against handle grips and hold them securely in place. Use thumb latches to lock both traction levers in neutral position, then stop engine by pulling throttle control back to the off position. See figure # 7.

O.P. LEVER	THUMB LATCH
	THUMB LATCH
HANDLE
	POINT
THUMB LATCH
NEUTRAL POSITION
TRACTION LEVER

Figure 7

NORMAL OPERATING STOP

1.Pull both traction levers firmly toward the handle grips to stop forward motion.

PRE-START CHECKLIST

Make the following checks and perform the services as required before each start up.

1.If required make cutting height adjustments and drive linkage adjustments. Refer to pages 5 and 6

2.Check tires for proper inflation (front caster tire pressure to be 50 lbs max. / rear tire pressure to be

14lbs max.

3.Check guards, deflectors, and covers to make sure all are in place and secure.

4.Check blade belts for wear and correct tension if worn or damaged, replace with original part.

5.Clean interior and exterior surfaces of the cutting deck and clean engine of any accumulation of dirt or debris. Keep engine air intake clear at all times.

6.Check engine oil add if needed (do not overfill) refer to engine manual for oil specs.

7.Add fuel to tank after pushing the mower outside where fumes can dissipate. Make sure cap is tight after refueling.

NOTE

DO NOT ADD FUEL WHILE ENGINE IS RUNNING OR WHILE ENGINE IS HOT.

2.Use thumb latches to lock traction levers in the neutral position.

3.Move the throttle control to the slow position.

4.Move blade engagement lever to the off position.

5.Move shift lever to the neutral position.

6.Stop engine by pulling throttle control lever all the way back to the off position.

NOTE

CLOSE FUEL VALVE AT THE END OF

EACH MOWING JOB !!

NOTE

USE FRESH, CLEAN, LEAD FREE

GASOLINE. DO NOT USE GASOLINE

THAT HAS BEEN STORED FOR LONG

PERIODS. LEADED GASOLINE OR

GASOHOL IS NOT RECOMMENDED.

STARTING AND OPERATING

ENGINE: START ENGINE AS FOLLOWS:

1.Move blade engagement lever to the off position so the interlock will allow engine to start.

2.Check gear shifter to be sure it is in the neutral position.

3.While on level terrain, lock both traction levers into the neutral position.

4.Open fuel shut-off valve

5.Set throttle control all the way forward to the choke position.

W4815, W3613, W3213, W4815, WG4815P, WG4815P, W3213 specifications

Husqvarna, a brand synonymous with high-quality outdoor power equipment, offers a range of powerful and efficient tools ideal for various landscaping needs. Among their notable products are the Husqvarna WG4815P, W3613, W3213, and W4815 models, each designed with advanced technologies and features to enhance user experience and performance.

The Husqvarna WG4815P is a versatile, gas-powered string trimmer that combines heavy-duty performance with user-friendly features. It is engineered with a robust 48cc engine that delivers impressive power for tackling tough jobs. One standout feature is the Smart Start technology, which ensures easy starting with minimal effort. The WG4815P also boasts an ergonomic design, allowing for comfortable handling during prolonged use.

Next, the Husqvarna W3613 is designed primarily for professional landscapers who demand reliability and efficiency. This model features a high-performance engine for increased torque and power, making it suitable for various applications, from grass trimming to tackling dense brush. The adjustable handle offers customizable comfort, while the dual-line cutting system provides a clean, effective cut every time, reducing the need for frequent maintenance.

The W3213 model continues the trend of reliability with its efficient design and lightweight construction, making it an excellent choice for residential users and beginners. Its easy-start engine, combined with an auto-return stop switch, ensures that it is ready to go whenever you are. The W3213 is particularly notable for its user-friendly controls, making it accessible for those new to outdoor maintenance.

Lastly, the Husqvarna W4815 stands out with its blend of innovative technology and superior performance. Featuring low-vibration technology, it minimizes user fatigue while ensuring precise control during operation. Its advanced cooling system prevents overheating, extending the lifespan of the engine and enhancing overall reliability. The W4815 is equipped with an efficient cutting head that can handle a variety of attachments, allowing for a more versatile gardening experience, from edging lawns to clearing overgrown areas.

All these models reflect Husqvarna's commitment to quality, durability, and performance. With their focus on advanced engineering and user-centric designs, these trimmers are perfect for both enthusiasts and professionals, offering a wide array of features that meet the demands of various landscaping tasks. Whether you choose the WG4815P, W3613, W3213, or W4815, you can be assured of high performance and exceptional results every time.