Husqvarna CD52i, TRD61L, TRD48i, TRD52i, CD61B, CD61L, CD52L Introduction, Congratulations, Operating

Page 5

INTRODUCTION

Congratulations

Thank you for purchasing a Husqvarna deck. It is built for superior efficiency to rapidly mow primarily large areas..

This manual is a valuable document. Read the contents carefully before using or servicing the machine. The following of instructions (use, service, maintenance, etc.) by all who operate this machine is important for the safety of the operator and others. It can also considerably increase the life span of the machine and increase its resale value.

If you sell your machine, be sure to give the operator’s manual to the new owner.

Operating

This machine is constructed only for mowing grass on lawns and even ground without obstacles such as stones, tree stumps, etc. All other types of uses are incorrect. The manufacturer’s directions concerning operation, maintenance, and repairs must be carefully followed.

Lawn mowers and all power equipment, can be potentially dangerous if used improperly. Safety requires good judgement, careful use in accordance with these instructions and common sense.

The machine must only be operated, maintained, and repaired by persons familiar with the machine’s special characteristics and who are also knowledgeable about the safety instructions. Use only approved repair parts to maintain this machine.

Accident prevention regulations, other general safety regulations, occupational safety rules, and traffic regulations must be followed without fail.

Unauthorized modifications to the design of the machine may absolve the manufacturer from liability for any resulting personal injury or property damage.

English-5

Image 5
Contents Operator’s Manual Page Contents Page Operating IntroductionCongratulations Manufacturing Number Good ServiceImportant Information Symbols and DecalsMoving sharp blades under cover General Operation SafetyNever take passengers Slope Operation Personal Safety EquipmentChildren Safe Handling of Gasoline Maintenance Risk of sparking Transport Maintenance Schedule MaintenanceDaily Weekly Maintenance interval Least Hours Once Maintenance Before AfterDeck belt removal Deck belt installationDeck belt Cutting Blades Blade replacementCleaning and Washing To adjust anti-scalp rollersTunnel Deck Combi DeckDeck spindle Tunnel deck only LubricationGeneral Torque Specifications Technical DataConformity Certificates USA requirementsPage Part No 132772 IR 12/17/07