Husqvarna CD52L Technical Data, Torque Specifications, Conformity Certificates, USA requirements

		TECHNICAL DATA
Torque Specifications
•	Engine crankshaft bolt	50 ft/lb (67 Nm)
•	Deck pulley bolts	45 ft/lb (61 Nm)
•	Lug nuts	75 ft/lb (100 Nm)
•	Blade bolt	45-55 ft/lb (60-75 Nm)
•	Standard ¼" fasteners	9 ft/lb (12 Nm)
•	Standard 5/16" fasteners	18 ft/lb (25 Nm)
•	Standard 3/8" fasteners	33 ft/lb (44 Nm)
•	Standard 7/16" fasteners	52 ft/lb (70 Nm)
•	Standard ½" fasteners	80 ft/lb (110 Nm)

When this product is worn out and no longer used, it should be returned to the reseller or other party for recycling.

In order to implement improvements, specifications and designs can be altered without prior notification.

Note that no legal demands can be placed based on the information contained in these instructions.

Use only original parts for repairs. The use of other parts voids the warranty.

Do not modify or install non-standard equipment to the unit without consent from the manufacturer. Modifications to the unit may cause unsafe operations or damage the unit.

Conformity Certificates

USA requirements

Labels are placed on the engine and/or in the engine compartment stating that the machine will fulfill the requirements. This is also applicable to special requirements for any of the states, (California emission rules etc.). Do not remove any of these labels. Certificates can also be supplied with the machine at delivery or written in the Engine manual. Take care of them as they are valuable documents.

CE requirements

Vibration data corresponding to Directive 2002/44/EC is given in the Technical Data Section. The Declaration of Conformity is included in the literature packet.

English-22