Husqvarna WH4817A, WH3614A, WH3615A manual Technical Assistance

Page 2

Thank you for buying an HUSQVARNA! Before operating your new mower, read, understand and follow the important safety instructions and the other instructions contained in this manual. Lawnmowers and all power equipment, can be potentially dangerous if used improperly.

SAFETY REQUIRES GOOD JUDGEMENT, CAREFUL USE IN ACCORDANCE WITH INSTRUCTIONS AND COMMON SENSE.

Congratulations on the purchase of your Husqvarna mower. This manual has been prepared for the owners and operators of the 36" and 48” walk-behind hydro commercial mowers. Read, understand and follow the safety and operating instructions.

! WARNING

Failure to follow cautious operating practices can result in serious injury to the operator or other persons. The owner must understand these instructions, and must allow only trained persons who understand these instructions to operate the mower. Each person operating the mower must be of sound mind and body and must not be under the influence of any mind altering sub- stance.

!CAUTION

1.Keep all shields, guards and safety devices in place and in proper working condition.

2.Stop engine and remove spark plug wires or remove key before adjusting, servicing, or per- forming maintenance.

TECHNICAL ASSISTANCE

If you have any questions pertaining to your mower contact your dealer. To locate the nearest dealer please call 1-800-HUSKY-62.

For technical assistance please write: Husqvarna, 9906 Perimeter Woods Drive, Charlotte,

NC, 28216 or call: 1-800-HUSKY-MD.

!WARNING!

THE ENGINE EXHAUST FROM

THIS PRODUCT CONTAINS

CHEMICALS KNOWN TO THE STATE

OF CALIFORNIA TO CAUSE

CANCER, BIRTH DEFECTS OR

OTHER REPRODUCTIVE HARM.

Continuous dedication to improve our products require that specifications and design are sub- ject to change without notice.

2

Image 2
Contents Operators manual Models Technical Assistance Trouble Shooting Safety Table of Contents MaintenanceSetup and Adjustments Operating InstructionsOperation Safety TrainingPreparation Cutting Height Safety TransportationEquipment Setup and Adjustments Rear Deck Adjustment Motion Control Adjustment CuttingheightadjustmentchartReverse Spring Detent Adjustment Blade Drive Belt Adjustment Auxiliary Blade BeltPump Belt Interlock Safety SystemEngine Belt Guides Operating Instructions Controls Starting and Operation Maintenance Cutter Housing Spindle Assemblies When a problem occurs, do not overlook the simple causes