SAFETY INSTRUCTIONS
Personal protection
WARNING!You must use personal protection
!whenever you use the machine.
•Hearing protection
•Gloves must be worn when required, for example when fitting, inspecting or cleaning cutting attachments.
•Always wear heavy, long pants. Do not wear shorts, sandals or go barefoot.
•Wear sturdy,
Generally clothes should be
Machine′s safety equipment
This section describes the machine′s safety equipment, its purpose, and how checks and maintenance should be carried out to ensure that it operates correctly. See the ”What is what?” section to locate where this equipment is positioned on your machine.
WARNING! Never use a machine that has
!faulty safety equipment! Carry out the inspection, maintenance and service routines listed in this section.
Cutting cover and protective cover
The protective cover is designed to reduce the risk of crush injuries and to catch a broken drive belt. Check that the protective cover is undamaged and that it is properly secured.
The cutting cover is designed to reduce vibration and to reduce the risk of cuts. Make sure the cutting cover is not damaged and that there are no visible defects such as cracks.
Engine brake handle
The engine brake is designed to stop the engine. When the grip on the engine brake handle is released the engine should stop.
•Check that the engine brake works correctly and is undamaged.
Place the lawn mower on firm, flat surface and start it. Make sure that the cutter cannot come into contact with the ground or other objects.
Apply full throttle and then release the brake handle. The engine brake should always be adjusted so that the engine stops within 3 seconds.
Muffler
The muffler is designed to keep noise levels to a minimum and to direct exhaust fumes away from the user.
WARNING! The exhaust fumes from the
!engine are hot and may contain sparks which can start a fire. Never start the machine indoors or near combustible material!
In areas with a hot, dry climate there is a high risk of fires. These areas are sometimes controlled by legislation and requirements that among other things the muffler must be equipped with an approved type of spark arrestor mesh.
For mufflers it is very important that you follow the instructions on checking, maintaining and servicing your machine.
English – 77