Husqvarna YTH2042TD Before Starting the Engine, Reverse Operation System ROS, To Operate on Hills

Page 11

OPERATION

REVERSE OPERATION SYSTEM (ROS)

Your tractor is equipped with a Reverse Operation System (ROS). Any attempt by the operator to travel in the reverse direction with the attachment clutch engaged will shut off the engine unless ignition key is placed in the ROS "ON" position.

WARNING: Backing up with the attachment clutch en- gaged while mowing is strongly discouraged. Turning the ROS "ON", to allow reverse operation with the attachment clutch engaged, should only be done when the operator decides it is necessary to reposition the machine with the attachment engaged. Do not mow in reverse unless absolutely necessary.

USING THE REVERSE OPERATION SYSTEM -

Only use if you are certain no children or other bystanders will enter the mowing area.

Depress brake pedal all the way down.

With engine running, turn ignition key counterclockwise to ROS "ON" position.

Look down and behind before and while backing.

Slowly depress reverse drive pedal to start movement.

When use of the ROS is no longer needed, turn the ignition key clockwise to engine "ON" position.

ROS "ON" POSITION

ENGINE "ON" POSITION

 

(NORMAL OPERATING)

02828

TO OPERATE ON HILLS

CAUTION: Do not drive up or down hills with slopes greater than 15° and do not drive across any slope.

Choose the slowest speed before starting up or down hills.

Avoid stopping or changing speed on hills.

If stopping is absolutely necessary, push brake pedal quickly to brake position and engage parking brake.

To restart movement, slowly release parking brake and brake pedal.

Slowly depress appropriate drive pedal to slowest set- ting.

Make all turns slowly.

TO TRANSPORT (See Figs. 3 and 11)

When pushing or towing your tractor, be sure to disengage transmission by placing freewheel control in freewheeling position. Free wheel control is located at the rear drawbar of tractor.

Raise attachment lift to highest position with attachment lift control.

Pull freewheel control out and down into the slot and release so it is held in the disengaged position.

Do not push or tow tractor at more than two (2) MPH.

To reengage transmission, reverse above procedure.

NOTE: To protect hood from damage when transporting your tractor on a truck or a trailer, be sure hood is closed and secured to tractor. Use an appropriate means of tying hood to tractor (rope, cord, etc.).

TRANSMISSION ENGAGED

TRANSMISSION DISENGAGED

Fig. 11

TOWING CARTS AND OTHER ATTACHMENTS

Tow only the attachments that are recommended by and comply with specifications of the manufacturer of your trac- tor. Use common sense when towing. Too heavy of a load, while on a slope, is dangerous. Tires can lose traction with the ground and cause you to lose control of your tractor.

SERVICE REMINDER/HOUR METER

Service reminder shows the total number of hours the engine has run and flashes to indicate that the engine or mower needs servicing. When service is required, the service reminder will flash for two hours. To service engine and mower, see the Maintenance section of this manual.

NOTE: Service reminder runs when the ignition key is in any position but "STOP". For accurate reading, be sure key remains in the "STOP" position when engine is not running.

BEFORE STARTING THE ENGINE

CHECK ENGINE OIL LEVEL

The engine in your tractor has been shipped, from the factory, already filled with summer weight oil.

Check engine oil with tractor on level ground.

Remove oil fill cap/dipstick and wipe clean, reinsert the dipstick and screw cap tight, wait for a few seconds, remove and read oil level. If necessary, add oil until “FULL” mark on dipstick is reached. Do not overfill.

For cold weather operation you should change oil for easier starting (See “OIL VISCOSITY CHART” in the Maintenance section of this manual).

To change engine oil, see the Maintenance section in this manual.

11

Image 11
Contents YTH2042TD II. Slope Operation Safety RulesSafe Operation Practices for Ride-On Mowers General OperationIV. Towing ServiceIII. Children Table of Contents Unpack Carton AssemblyUnassembled Parts To Remove Tractor from CartonCheck Brake System Check Tire PressureCheck Deck Levelness Check for Proper Position of ALL BeltsOperation Cruise Control Lever Used to set forward Know Your TractorHOW to USE Your Tractor To Operate Mower To Adjust Mower Cutting Height See FigTo Adjust Gauge Wheels See Fig System CharacteristicsTo Operate on Hills Service REMINDER/HOUR MeterBefore Starting the Engine Reverse Operation System ROSAutomatic Transmission Warm UP ADD GasolineTo Start Engine See Fig Purge TransmissionMowing Tips Schedule MaintenanceMaintenance General RecommendationsTires BatteryTractor Brake OperationEngine Cleaning To Remove Mower See Fig Service and AdjustmentsTo Install Mower See Figs Service and Adjustments To Level Mower To Check Brake To Replace Mower Blade Drive Belt See FigTo Replace Motion Drive Belt See Fig To Remove Wheel for Repairs See Fig To Start Engine with a Weak Battery See FigReplacing Battery See Fig Front Wheel TOE-IN/CAMBERTransmission Engine OIL StorageOther Fuel SystemTroubleshooting Points Engine continues Only Ride UP and Down Hill Not Across Hill Degrees MAX Suggested Guide for Sighting Slopes for Safe Operation02.24.10 CL

YTH2042TD specifications

The Husqvarna YTH2042TD is a robust and versatile garden tractor designed to make mowing large areas efficient and enjoyable. This model combines power, performance, and comfort, making it an excellent choice for homeowners with extensive lawns.

One of the standout features of the YTH2042TD is its powerful 20 HP Kohler engine. This reliable engine delivers consistent performance, allowing the mower to tackle tough grass and uneven terrain with ease. The hydrostatic transmission provides a smooth and effortless driving experience, enabling users to adjust speed seamlessly without the need for gear shifting.

The cutting deck of the YTH2042TD measures 42 inches, optimized for efficient mowing. With the ability to adjust the cutting height between 1 to 4 inches, users can choose the ideal trim for their lawn, promoting healthy grass growth. The mower also utilizes a clear-cutting system that ensures an even and precise cut every time.

Incorporating innovative technologies, the Husqvarna YTH2042TD features an easy-to-use deck lift system. This allows users to change the cutting height quickly and effortlessly from the operator’s seat. Additionally, an integrated cruise control feature lets users maintain a steady speed for a more comfortable mowing experience over large areas.

Another key characteristic of the YTH2042TD is its ergonomic design. The high-back seat provides excellent support, allowing users to remain comfortable during longer mowing sessions. The instrument panel is also conveniently located for easy access to controls, enhancing the overall usability of the tractor.

The Husqvarna YTH2042TD stands out for its durability and long-lasting construction. Built with high-quality materials, this mower is engineered to withstand the rigors of regular use, ensuring that it remains operational for years to come. Its robust frame and sturdy build give users confidence that it can handle demanding tasks.

Safety features have also been thoughtfully integrated into the design. The automatic blade engagement system is a standout, ensuring that the mower blades engage smoothly while minimizing the risk of accidents. An ignition switch with a safety interlock prevents the engine from starting unless the mower is in gear.

In conclusion, the Husqvarna YTH2042TD is a feature-rich garden tractor that combines power, comfort, and advanced technology. With its powerful engine, adjustable cutting deck, and ergonomic design, it provides an exceptional mowing experience, making it an ideal choice for those looking to maintain their lawns with ease and efficiency.