Husqvarna YTH2042TD manual Storage, Other, Fuel System, Engine OIL, Cylinders

Page 24

STORAGE

Immediately prepare your tractor for storage at the end of the season or if the tractor will not be used for 30 days or more.

WARNING: Never store the tractor with gasoline in the tank inside a building where fumes may reach an open flame or spark. Allow the engine to cool before storing in any enclosure.

TRACTOR

Remove mower from tractor for winter storage. When mower is to be stored for a period of time, clean it thor- oughly, remove all dirt, grease, leaves, etc. Store in a clean, dry area.

•Clean entire tractor (See “CLEANING” in the Mainte- nance section of this manual).

•Inspect and replace belts, if necessary (See belt re- placement instructions in the Service and Adjustments section of this manual).

•Lubricate as shown in the Maintenance section of this manual.

•Be sure that all nuts, bolts and screws are securely fastened. Inspect moving parts for damage, breakage and wear. Replace if necessary.

•Touch up all rusted or chipped paint surfaces; sand lightly before painting.

BATTERY

•Fully charge the battery for storage.

•After a period of time in storage, battery may require recharging.

•To help prevent corrosion and power leakage during long periods of storage, battery cables should be dis- connected and battery cleaned thoroughly (see “TO CLEAN BATTERY AND TERMINALS” in the Mainte- nance section of this manual).

•After cleaning, leave cables disconnected and place cables where they cannot come in contact with battery terminals.

•If battery is removed from tractor for storage, do not store battery directly on concrete or damp surfaces.

ENGINE

FUEL SYSTEM

IMPORTANT: IT IS IMPORTANT TO PREVENT GUM DEPOSITS FROM FORMING IN ESSENTIAL FUEL SYSTEM PARTS SUCH AS CARBURETOR, FUEL FILTER, FUEL HOSE, OR TANK DURING STORAGE. ALSO, EXPERIENCE INDICATES THAT ALCOHOL BLENDED FUELS (CALLED GASOHOL OR USING ETHANOL OR METHANOL) CAN ATTRACT MOISTURE WHICH LEADS TO SEPARATION AND FORMATION OF ACIDS DURING STORAGE. ACIDIC GAS CAN DAMAGE THE FUEL SYSTEM OF AN ENGINE WHILE IN STORAGE.

•Empty the fuel tank by starting the engine and let it run until the fuel lines and carburetor are empty.

•Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.

•Use fresh fuel next season.

NOTE: Fuel stabilizer is an acceptable alternative in mini- mizing the formation of fuel gum deposits during storage. Add stabilizer to gasoline in fuel tank or storage container. Always follow the mix ratio found on stabilizer container. Run engine at least 10 minutes after adding stabilizer to allow the stabilizer to reach the carburetor. Do not empty the gas tank and carburetor if using fuel stabilizer.

ENGINE OIL

Drain oil (with engine warm) and replace with clean engine oil. (See “ENGINE” in the Maintenance section of this manual).

CYLINDER(S)

•Remove spark plug(s).

•Pour one ounce of oil through spark plug hole(s) into cylinder(s).

•Turn ignition key to “START” position for a few seconds to distribute oil.

•Replace with new spark plug(s).

OTHER

•Do not store gasoline from one season to another.

•Replace your gasoline can if your can starts to rust. Rust and/or dirt in your gasoline will cause problems.

•If possible, store your tractor indoors and cover it to give protection from dust and dirt.

•Cover your tractor with a suitable protective cover that does not retain moisture. Do not use plastic. Plastic cannot breathe which allows condensation to form and will cause your tractor to rust.

IMPORTANT: NEVER COVER TRACTOR WHILE ENGINE AND EXHAUST AREAS ARE STILL WARM.

24

Page 23 Page 25
Image 24
Page 23 Page 25
Contents YTH2042TD Safety Rules Safe Operation Practices for Ride-On MowersGeneral Operation II. Slope OperationService III. ChildrenIV. Towing Table of Contents Assembly Unassembled PartsTo Remove Tractor from Carton Unpack CartonCheck Tire Pressure Check Deck LevelnessCheck for Proper Position of ALL Belts Check Brake SystemOperation Know Your Tractor Cruise Control Lever Used to set forwardHOW to USE Your Tractor To Adjust Mower Cutting Height See Fig To Adjust Gauge Wheels See FigSystem Characteristics To Operate MowerService REMINDER/HOUR Meter Before Starting the EngineReverse Operation System ROS To Operate on HillsADD Gasoline To Start Engine See FigPurge Transmission Automatic Transmission Warm UPMowing Tips Maintenance MaintenanceGeneral Recommendations ScheduleBattery TractorBrake Operation TiresEngine Cleaning Service and Adjustments To Install Mower See FigsTo Remove Mower See Fig Service and Adjustments To Level Mower To Replace Mower Blade Drive Belt See Fig To Replace Motion Drive Belt See FigTo Check Brake To Start Engine with a Weak Battery See Fig Replacing Battery See FigFront Wheel TOE-IN/CAMBER To Remove Wheel for Repairs See FigTransmission Storage OtherFuel System Engine OILTroubleshooting Points Engine continues Suggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across Hill Degrees MAX02.24.10 CL

YTH2042TD specifications

The Husqvarna YTH2042TD is a robust and versatile garden tractor designed to make mowing large areas efficient and enjoyable. This model combines power, performance, and comfort, making it an excellent choice for homeowners with extensive lawns.

One of the standout features of the YTH2042TD is its powerful 20 HP Kohler engine. This reliable engine delivers consistent performance, allowing the mower to tackle tough grass and uneven terrain with ease. The hydrostatic transmission provides a smooth and effortless driving experience, enabling users to adjust speed seamlessly without the need for gear shifting.

The cutting deck of the YTH2042TD measures 42 inches, optimized for efficient mowing. With the ability to adjust the cutting height between 1 to 4 inches, users can choose the ideal trim for their lawn, promoting healthy grass growth. The mower also utilizes a clear-cutting system that ensures an even and precise cut every time.

Incorporating innovative technologies, the Husqvarna YTH2042TD features an easy-to-use deck lift system. This allows users to change the cutting height quickly and effortlessly from the operator’s seat. Additionally, an integrated cruise control feature lets users maintain a steady speed for a more comfortable mowing experience over large areas.

Another key characteristic of the YTH2042TD is its ergonomic design. The high-back seat provides excellent support, allowing users to remain comfortable during longer mowing sessions. The instrument panel is also conveniently located for easy access to controls, enhancing the overall usability of the tractor.

The Husqvarna YTH2042TD stands out for its durability and long-lasting construction. Built with high-quality materials, this mower is engineered to withstand the rigors of regular use, ensuring that it remains operational for years to come. Its robust frame and sturdy build give users confidence that it can handle demanding tasks.

Safety features have also been thoughtfully integrated into the design. The automatic blade engagement system is a standout, ensuring that the mower blades engage smoothly while minimizing the risk of accidents. An ignition switch with a safety interlock prevents the engine from starting unless the mower is in gear.

In conclusion, the Husqvarna YTH2042TD is a feature-rich garden tractor that combines power, comfort, and advanced technology. With its powerful engine, adjustable cutting deck, and ergonomic design, it provides an exceptional mowing experience, making it an ideal choice for those looking to maintain their lawns with ease and efficiency.
Top Page Image Contents