Husqvarna YTH2042 TWIN owner manual Table of Contents

Page 4

PRODUCT SPECIFICATIONS

Gasoline Capacity

4 Gallons

 

and type:

Unleaded Regular

Oil Type (API-SG-SL):

SAE 30 (above 32°F)

SAE 5W-30 (below 32°F)

 

 

Oil Capacity:

W/ Filter:

58 oz

 

 

Spark Plug:

Champion RC12YC

(Gap: .040")

 

 

Ground Speed (MPH):

Forward:

0 – 5.5

Reverse:

0 – 2.4

 

Charging System:

15 AMPS @ 3600 RPM

 

 

 

Battery:

AMP/HR:

35

 

MIN. CCA:

280

Case Size:

U1R

 

Blade Bolt Torque:

45-55 FT. LBS.

CONGRATULATIONS on your purchase of a new tractor. It has been designed, engineered and manufactured to give you the best possible dependability and performance.

Should you experience any problem you cannot easily rem- edy, please contact your nearest authorized servicecenter/ department We have competent, well-trained technicians and the proper tools to service or repair this tractor.

Please read and retain this manual. The instructions will enable you to assemble and maintain your tractor properly. Always observe the “SAFETY RULES”.

CUSTOMER RESPONSIBILITIES

Read and observe the safety rules.

Follow a regular schedule in maintaining, caring for and using your tractor.

Follow the instructions under “Maintenance” and “Stor- age” sections of this owner’s manual.

WARNING: This tractor is equipped with an internal com- bustion engine and should not be used on or near any un- improved forest-covered, brush-covered or grass-covered land unless the engine’s exhaust system is equipped with a spark arrester meeting applicable local or state laws (if any). If a spark arrester is used, it should be maintained in effective working order by the operator.

In the state of California the above is required by law (Section 4442 of the California Public Resources Code). Other states may have similar laws. Federal laws apply on federal lands.

A spark arrester for the muffler is available through your nearest authorized service center/department (See REPAIR PARTS section of this manual).

TABLE OF CONTENTS

SAFETY RULES

2-3

PRODUCT SPECIFICATIONS

4

CUSTOMER RESPONSIBILITIES

4

ASSEMBLY

5-6

OPERATION

7-13

MAINTENANCE SCHEDULE

14

MAINTENANCE

14-17

SERVICE AND ADJUSTMENTS

18-24

STORAGE

25

TROUBLESHOOTING

26-27

REPAIR PARTS

29-41

4

Image 4
Contents YTH2042 Twin Safety Rules Safe Operation Practices for Ride-On MowersGeneral Operation II. Slope OperationService General ServiceIII. Children IV. TowingTable of Contents Assembly Unassembled PartsTo Remove Tractor from Carton Unpack CartonCheck Tire Pressure Check Deck LevelnessCheck for Proper Position of ALL Belts Check Brake SystemOperation Know Your Tractor Reverse Operation System ROS on PositionHOW to USE Your Tractor StoppingTo Adjust Mower Cutting Height See Fig To Adjust Gauge Wheels See FigSystem Characteristics To Operate MowerService REMINDER/HOUR Meter Before Starting the EngineTo Operate on Hills Check Engine OIL LevelPurge Transmission To Start Engine See FigAutomatic Transmission Warm UP Mowing Tips Maintenance MaintenanceGeneral Recommendations ScheduleBattery TractorBrake Operation TiresEngine Cleaning IN-LINE Fuel Filter See FigService and Adjustments To Level Mower Belt Installation To Replace Mower Blade Drive Belt See FigTo Replace Motion Drive Belt See Fig Belt RemovalTo Remove Wheel for Repairs See Fig Front Wheel TOE-IN/CAMBERTo Check Brake To Install Mower See Fig To Remove Mower See FigTo Start Engine with a Weak Battery See Fig Replacing Battery See FigTo Attach Jumper Cables To Remove CABLES, Reverse OrderTo Adjust Throttle Control Cable To Adjust Choke ControlTo Adjust Carburetor To Replace Headlight BulbStorage OtherFuel System Engine OILTroubleshooting Points Problem Cause CorrectionEngine dies when Wheels and Tires DecalsKEY Part Description Schematic Tractor Model NO. YTH2042 Twin 96041005400, Product no 41Electrical KEY Part NO. NO. Description Chassis KEY Part Description Drive 17 532 41 36-78 Spring, Brake Steering Assembly Spark Arrester KIT EngineSeat Assembly Mower Lift Mower Deck Tractor Model NO. YTH2042 Twin 96041005400, Product no 41 Service Notes Suggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across Hill Degrees MAX532 41 00-15 Rev 05.21.07 CL