Husqvarna 335XPT manual Cutting equipment designed to minimise kickback, Bar, Saw chain

Page 11

SAFETY INSTRUCTIONS

1Cutting equipment designed to minimise kickback

Faulty cutting equipment or the wrong combination of bar and chain increases the risk of kickback. Use only the bar and chain combinations recommended in the ”Technical data” section.

The only way to avoid kickback is to make sure that the kick- back zone of the bar never touches anything.

By using cutting equipment with “built-in” kickback protection and keeping the chain sharp and well-maintained you can reduce the effects of kickback.

A Bar

The smaller the tip radius the smaller the kickback zone and the lower the chance of kickback.

B Saw chain

A saw chain is made up of a number of links, which are available in standard and low-kickback versions.

None

Standard Low-kickback

CUTTING LINK

DRIVE LINK

SIDE LINK

Combining these links in different ways gives different degrees of kickback reduction. In terms of kickback reduction alone, four different types of link are available.

Kickback reduction

Cutting link

Drive link

Side link

LOW

STANDARD

HIGH

EXTRA HIGH

CSome terms that describe the bar and chain

When the cutting equipment supplied with your saw becomes worn or damaged you will need to replace it. Use only the type of bar and chain recommended by us. See the ”Technical data” section to find out which equipment is recommended for your saw.

Bar

• LENGTH (inches/cm)

• NUMBER OF TEETH ON BAR TIP SPROCKET (T). Small number = small tip radius = low-kickback

• CHAIN PITCH (inches) The spacing between the drive links of the chain must match the spacing of the teeth on the bar tip sprocket and drive sprocket.

• NUMBER OF DRIVE LINKS The number of drive links is determined by the length of the bar, the chain pitch and the number of teeth on the bar tip sprocket.

• BAR GROOVE WIDTH (inches/mm)

The groove in the bar must match the width of the chain drive links.

•SAW CHAIN OIL HOLE AND HOLE FOR CHAIN

TENSIONER

The bar must be matched to the chain saw design.

Saw chain

• SAW CHAIN PITCH (inches)

Spacing between drive links.

• DRIVE LINK WIDTH (mm/ inches)

• NUMBER OF DRIVE LINKS

• LEVEL OF KICKBACK REDUCTION

The level of kickback reduction offered by a chain is indicated by its model number.

See the ”Technical data”

section to find the model numbers of chains that are recommended for use with your saw.

English – 11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents 335XPT California Symbols KEY to SymbolsContents Personal Protective Equipment Safety InstructionsChain SAW Safety Equipment Chain brake and front hand guard Chain catcher Throttle lockMuffler Stop switchVibration damping system Checking the brake trigger Checking brake band wearChecking the front hand guard Throttle lock 5 basic rules Cutting EquipmentSome terms that describe the bar and chain Cutting equipment designed to minimise kickbackBar Saw chainSharpening cutting teeth Sharpening your chain and adjusting raker clearanceGeneral information on sharpening cutting teeth Tensioning the chain General advice on setting raker clearanceSetting the raker clearance Filling with chain oil Lubricating cutting equipmentChain oil Chain drive sprocket Lubricating the bar tip sprocketWhat is kickback? HOW to Avoid KickbackDo not let go of the handles General rules10 ft General Safety PrecautionsMin m General Working Instructions Basic safety rulesCutting Basic cutting techniqueGeneral TermsFelling direction Tree felling techniqueSafe distance LimbingFelling Clearing the trunk and preparing your retreatCutting trees and branches that are in tension Preparations Freeing a tree that has fallen badly = high accident riskCutting the trunk into logs Freeing a Trapped treeWhat is WHAT? Mounting guide bar and chain AssemblyTwo-stroke oil Fuel HandlingFuelmix Gasoline10ft FuellingChain oil Min 3 mStart Start and StopCold engine Warm engineCarburetor MaintenanceTensioning the recoil spring Starter device assemblyStarter device Changing a broken or worn starter cordSpark plug Air filterMuffler Cooling system Adjustment of the oil pumpDaily maintenance Weekly maintenance Monthly maintenance For U.S. only Technical Data335XPT Obligations Emission Control Warranty StatementYour Warranty Rights 2001W06

335XPT specifications

The Husqvarna 335XPT is an innovative and powerful chainsaw designed for both professional and advanced home use. Combining cutting-edge technology with user-friendly features, this chainsaw is built to handle a variety of tasks with ease, ranging from tree pruning to felling larger trees.

One of the standout features of the 335XPT is its lightweight construction, making it easy to maneuver in tight spaces and over extended periods. Weighing just under 11 pounds, this chainsaw minimizes user fatigue, allowing for efficient work without compromising on power. The engine is a robust 38.2cc, offering sufficient horsepower to cut through hardwood and softwood alike, delivering impressive performance when it matters most.

The 335XPT comes equipped with Husqvarna’s X-Torq engine technology, which significantly reduces fuel consumption and lowers exhaust emissions. This technology not only benefits the environment but also improves fuel efficiency, allowing users to get more work done between refuels. The chainsaw also features a low vibration system, which lessens the strain on the user's hands and arms, providing added comfort during prolonged use.

For enhanced safety, the Husqvarna 335XPT is fitted with a chain brake that helps prevent accidental cuts, essential for any professional or passionate user. Additionally, the saw features a quick-release air filter, making maintenance simpler and ensuring that the chainsaw operates at peak performance. The side-mounted chain tensioning system allows for easy adjustments without the need for tools, making it quick and convenient to keep the bar and chain in optimal condition.

The ergonomic handle design provides a comfortable grip, reducing fatigue during extended use. The chainsaw also boasts a fuel pump that facilitates easy starts, even in cold conditions, ensuring that users can rely on it during critical jobs.

Overall, the Husqvarna 335XPT is an exceptional chainsaw that combines power, efficiency, and user comfort, making it suitable for professionals and dedicated homeowners alike. With its state-of-the-art features and technologies, this chainsaw stands as a testament to Husqvarna's commitment to quality and performance in outdoor power equipment. Whether tackling heavy-duty forestry tasks or managing smaller garden projects, the 335XPT proves to be a reliable and versatile tool that users can count on for years to come.
Top Page Image Contents