Husqvarna 335XPT manual Fuelling, Chain oil, Min 3 m, 10ft

Page 27

FUEL HANDLING

Chain oil

• The chain lubrication

system is automatic. Always

use special chain oil with

good adhesive

characteristics.

• In countries where no

special chain oil is available,

EP 90 transmission oil can

be used.

• Never use waste oil. This

results in damage to the oil

pump, the bar and the

chain.

Fuelling

Taking the following precautions, will lessen the risk of fire.

•Do not smoke or place warm objects in the vicinity of the fuel.

•Always shut off the engine before refuelling.

•Slowly open the fuel cap, when filling fuel, so that possible overpressure is slowly released.

•Tighten the fuel cap carefully after fuelling.

•Always move the saw from the fuelling area before starting.

• It is important to use oil of

the right viscosity according

to the air temperature.

• In temperatures below 0oC

(32oF) some oils become

too viscous. This can

overload the oil pump and

result in damage to the oil

pump components.

• Contact your servicing

dealer when choosing chain

oil.

Clean around the fuel cap. Clean the fuel and chain oil tanks regularly. The fuel filter should be changed at least once a year. Contamination in the fuel tanks causes malfunction. Make sure the fuel is well mixed by shaking the container before fuelling. The volume of chain oil and fuel tanks are adjusted to each other. Therefore, always fill chain oil and fuel at the same time.

Min 3 m

(10ft)

English – 27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents 335XPT California Symbols KEY to SymbolsContents Safety Instructions Chain SAW Safety EquipmentPersonal Protective Equipment Chain brake and front hand guard Chain catcher Throttle lockStop switch Vibration damping systemMuffler Checking brake band wear Checking the front hand guardChecking the brake trigger Throttle lock 5 basic rules Cutting EquipmentSome terms that describe the bar and chain Cutting equipment designed to minimise kickbackBar Saw chainSharpening your chain and adjusting raker clearance General information on sharpening cutting teethSharpening cutting teeth General advice on setting raker clearance Setting the raker clearanceTensioning the chain Lubricating cutting equipment Chain oilFilling with chain oil Chain drive sprocket Lubricating the bar tip sprocketWhat is kickback? HOW to Avoid KickbackDo not let go of the handles General rulesGeneral Safety Precautions Min m10 ft General Working Instructions Basic safety rulesCutting Basic cutting techniqueGeneral TermsFelling direction Tree felling techniqueSafe distance LimbingFelling Clearing the trunk and preparing your retreatCutting trees and branches that are in tension Preparations Freeing a tree that has fallen badly = high accident riskCutting the trunk into logs Freeing a Trapped treeWhat is WHAT? Mounting guide bar and chain AssemblyTwo-stroke oil Fuel HandlingFuelmix Gasoline10ft FuellingChain oil Min 3 mStart Start and StopCold engine Warm engineCarburetor MaintenanceTensioning the recoil spring Starter device assemblyStarter device Changing a broken or worn starter cordAir filter MufflerSpark plug Adjustment of the oil pump Daily maintenanceCooling system Weekly maintenance Monthly maintenance Technical Data 335XPTFor U.S. only Emission Control Warranty Statement Your Warranty RightsObligations 2001W06

335XPT specifications

The Husqvarna 335XPT is an innovative and powerful chainsaw designed for both professional and advanced home use. Combining cutting-edge technology with user-friendly features, this chainsaw is built to handle a variety of tasks with ease, ranging from tree pruning to felling larger trees.

One of the standout features of the 335XPT is its lightweight construction, making it easy to maneuver in tight spaces and over extended periods. Weighing just under 11 pounds, this chainsaw minimizes user fatigue, allowing for efficient work without compromising on power. The engine is a robust 38.2cc, offering sufficient horsepower to cut through hardwood and softwood alike, delivering impressive performance when it matters most.

The 335XPT comes equipped with Husqvarna’s X-Torq engine technology, which significantly reduces fuel consumption and lowers exhaust emissions. This technology not only benefits the environment but also improves fuel efficiency, allowing users to get more work done between refuels. The chainsaw also features a low vibration system, which lessens the strain on the user's hands and arms, providing added comfort during prolonged use.

For enhanced safety, the Husqvarna 335XPT is fitted with a chain brake that helps prevent accidental cuts, essential for any professional or passionate user. Additionally, the saw features a quick-release air filter, making maintenance simpler and ensuring that the chainsaw operates at peak performance. The side-mounted chain tensioning system allows for easy adjustments without the need for tools, making it quick and convenient to keep the bar and chain in optimal condition.

The ergonomic handle design provides a comfortable grip, reducing fatigue during extended use. The chainsaw also boasts a fuel pump that facilitates easy starts, even in cold conditions, ensuring that users can rely on it during critical jobs.

Overall, the Husqvarna 335XPT is an exceptional chainsaw that combines power, efficiency, and user comfort, making it suitable for professionals and dedicated homeowners alike. With its state-of-the-art features and technologies, this chainsaw stands as a testament to Husqvarna's commitment to quality and performance in outdoor power equipment. Whether tackling heavy-duty forestry tasks or managing smaller garden projects, the 335XPT proves to be a reliable and versatile tool that users can count on for years to come.
Top Page Image Contents