Husqvarna Pro 18 AWD manual Service Journal, Delivery Service, After the First 8 Hours

Page 74

SERVICE JOURNAL

Action

 

Delivery Service

 

1. Fill the battery with battery acid and charge for four hours.

 

2. Fit the steering wheel, seat and, where applicable, other components.

 

3. Attach the cutting unit.

 

4. Adjust the cutting unit:

 

 

Adjust the lifting springs (the ”weight” of the cutting unit should be

 

 

12-15 kg, if a brush is to be used, set to maximum spring power).

 

 

Adjust the cutting unit so that its rear edge is about 2-4 mm

 

 

higher than its front edge.

 

 

Adjust the cutting unit’s cutting height setting so that the cutting

 

 

height limit is 5 mm above the unit frame at the lowest cutting

 

 

height.

 

5. Check that the right amount of oil is in the engine and transmission.

 

6. Check and adjust the air pressure in the tyres (60 kPa, 0.6 bar).

 

7.

Connect the battery.

 

8. Fill the fuel tank and start the engine.

 

9. Check that the machine does not move in neutral.

 

10. Check:

 

 

Driving forwards.

 

 

Reversing.

 

 

Engaging the blades.

 

 

Safety switch in the seat.

 

 

Safety switch for the lifting lever.

 

 

The safety switch for the hydrostat pedals.

 

11. Check the engine speed: 2,900 ±75 rpm.

 

12. Bleed the hydraulic system, top up with oil if necessary.

 

13. Check the mounting bolts on the muffler.

 

14. Inform the customer about:

 

 

The need and benefit of following the service schedule.

Delivery service has been carried

 

out.

 

 

 

The need and advantages of leaving the machine for service

No remaining notes.

 

every 300 hours.

 

 

 

The effects of service and maintaining a service journal on the

Certified:

 

 

 

machine’s resale value.

 

 

Application areas for BioClip.

 

15. Fill in the sales certificate, etc.

 

 

 

 

After the First 8 Hours

Date, mileage reading, stamp,

signature

1.

Change engine oil.

 

 

 

 

72 – English

Image 74
Contents Rider Pro 15 Pro 18 Pro 18 AWD Page Contents Driving and Transport on Public Roads IntroductionCongratulations TowingProper Service Serial NumberKEY to Symbols Read the operator’s manualGeneral Use Safety InstructionsSafety Instructions Keep children away from the work area Driving on Slopes Proceed as followsMaintenance ChildrenAvoid sparking and its consequences by Wearing protective glassesTransport Accelerator PresentationPresentation Placement of Controls Cutting UnitChronometer Throttle ControlChoke Lever Cutting Height Adjustment Lever Lifting Lever for the Cutting UnitSeat Lights and Power OutletParking Brake RefuellingDriving Mowing TipsFront Axle Clutch ControlRear Axle Before Starting Starting the Engine8009-494 Driving the Rider BrakingStopping the Engine Daily main Weekly3 At least Maintenance Tenance MaintenanceMaintenance Schedule Once Interval hours Before AfterMaintenance Daily main Weekly3 At least Interval hours Main Once 100 300Front Cover Dismantling the Rider CoversEngine Cover Transmission CoverChecking and Adjusting the Steering Cables Left-hand Wing CoverAdjusting the Parking Brake Pro 15, Pro Adjusting the Parking Brake Pro 18 AWDInspecting the Muffler Checking and Adjusting the Throttle CableChecking and Adjusting the Choke Cable Checking the Fuel Pump’s Air Filter Cleaning the Pulse Air FilterReplacing the Fuel Filter Air Supply Exhaust PipeReplacing the Air Filter Pro 8009-148 8009-149 8009-150 8009-151 Cleaning the Engine and Muffler Checking the Engine’s Cooling Air IntakeFitting the wrong spark plug type can damage the engine Checking the Acid Level in the BatteryActions with acid contact Checking the Safety System Replacing the Light Bulbs Fuses Checking the Tyre PressuresReplacing the Rear Drive Belt Pro 15 and Pro RemovalAssembly Replacing the Hydraulic Pump’s Drive Belt Pro 18 AWD 8009-641 8009-640 8009-726 Replacing the Centre Belt Dismantling Replacing the Front Belt Pro 15, ProReplacing the Front Belt Pro 18 AWD 8009-122 Fitting the Cutting Unit Observe caution to avoid trapping your handRemoving the Cutting Unit Checking and Adjusting the Cutting Unit’s Ground Pressure Cutting HeightAdjusting the Parallelism of the Cutting Unit Checking the Parallelism of the Cutting Unit8009-287 Cutting Unit’s Service Position Placing in the Service Position6017-221 6017-222 8009-598 8009-122 6017-223 Releasing the Service Position Inspecting the Blades Removing the BioClip Plug Combi Lubrication Chart Pro Lubrication8009-504 Lubrication Chart Pro 18 AWD General Lubricating the CablesPedal Mechanism in Frame Tunnel Chains in the Frame TunnelThrottle and Choke Cables, Lever Bearings Three-Point Link and JointsDriver’s Seat Belt Tensioner Engine OilHydrostatic Cable with Linkage Changing the Engine OilHydraulic System and Transmission Oil level Pro 18 AWD Parking Brake Cable Pro 15, ProTransmission Oil Level Pro 15, Pro Oil Filter, Change Hydraulic Fluid Filter, Replacing Pro 18, Pro 18 AWDParking Brake Cable Pro 18 AWD Right Rear Axle BearingTrouble Shooting Guide Problem CauseCover ServiceStorage Wiring Diagram Colour Abbreviations8009-588 8009-679 Technical Data Dimensions Rider Pro Rider Pro 18 AWDCutting unit Combi EU Declaration of Conformity EU Declaration of Conformity Only applies to EuropeAfter the First 8 Hours Service JournalDelivery Service Hour Service First after 50 hours 100/200-Hour Service Action Date, mileage reading, stamp SignatureService Journal At Least Once Each Season Action Date, mileage reading, stamp, signature Service Journal ´z+RÆh¶6j¨ English 115 00 2005W05

Pro 18 AWD specifications

The Husqvarna Pro 18 AWD is a state-of-the-art lawnmower designed for professional landscapers and gardening enthusiasts alike. Its robust engineering and innovative features make it stand out in the competitive market of outdoor power equipment.

One of the key features of the Pro 18 AWD is its all-wheel drive system (AWD), which enhances traction and control on varied terrains. This is particularly beneficial for properties with slopes or uneven ground, ensuring that the mower can maneuver smoothly without losing grip. The AWD system provides the user with confidence and stability, reducing the likelihood of slips and accidents during operation.

Equipped with a powerful engine, the Pro 18 AWD delivers consistent performance even in challenging conditions. The engine is designed for efficiency and durability, making it capable of handling thick grass and tough overgrowth with ease. The mower's cutting deck is adjustable, allowing users to choose their desired cutting height, providing flexibility for different grass types and landscapes.

Another standout feature of the Pro 18 is its cutting technology. The mower comes with a high-performance cutting deck that utilizes advanced blade design, ensuring clean and precise cuts. This results in a healthier lawn and a superior finish. Additionally, the mower incorporates a mulching capability, allowing grass clippings to be finely shredded and returned to the soil as natural fertilizer, promoting lawn health while reducing waste.

Ergonomics is a top priority in the design of the Husqvarna Pro 18 AWD. The adjustable handlebar and comfortable grip provide ease of use and reduce fatigue during extended periods of mowing. The lightweight construction enhances maneuverability, making it easier to navigate tight spots and obstacles in your yard.

Furthermore, the Husqvarna Pro 18 AWD is equipped with various safety features, including a blade brake that stops the blades quickly when the user releases the handle. This ensures safe operation and reduces the risk of accidents.

In summary, the Husqvarna Pro 18 AWD combines power, versatility, and user-friendly design, making it an ideal choice for both professionals and homeowners who demand top performance from their lawnmowers. With features like all-wheel drive, advanced cutting technology, ergonomics, and safety measures, this mower sets a new standard in the lawn care industry, ensuring that users can achieve a pristine lawn with ease and efficiency. Whether tackling residential lawns or larger commercial properties, the Pro 18 AWD is poised to deliver exceptional results.