Husqvarna ZTH5223A, ZTH6125A, ZTH5225A Safety Training, Preparation, Operation

Page 4

SAFETY

TRAINING:

1.Read this manual carefully and question your dealer if something is not clear.

2.Be thoroughly familiar with the controls and proper use of the equipment.

3.Never allow children, teenagers, or people unfamiliar with these instructions to use the mower.

4.Do not mow while people, particularly children, or pets are nearby.

PREPARATION:

1.The use of personal protective equipment such as (but not limited to) protection for the eyes, ears, feet and head is recommended.

2.Never operate the mower without proper guards, covers, safety switches and devices in place and properly functioning. Inspect these items daily for their condition and proper op- eration. If the condition or operation of any of these devices is questionable they must be replaced or repaired before using the mower.

3.Thoroughly inspect the area to be mowed and remove all stones, sticks, wire and other debris that may be thrown by the mower. Also note or mark other obstacles such as holes, stumps, etc..

4.Do not operate the mower when barefoot or wearing open shoes. Always wear substantial footwear and long pants.

5.Fill gas tank(s) before starting mower. DO NOT SMOKE near gasoline containers. Do not fill gas tank indoors or when engine is hot or running. Clean off any spilled gasoline before starting the mower.

OPERATION:

1.Mow only in daylight or good artificial light.

2.Do not operate the mower in wet grass if possible.

3.Mow up and down slopes. Use extreme caution when mowing or turning on slopes. Always turn to the downhill side. Do not mow excessively steep slopes ( mower may tip over and cause injury or death ).

4.Use caution when backing up.

5.Stop the blades when crossing surfaces other than grass; or when traveling to and from the area to be mowed.

6.Never operate the mower with defective, broken or excessively worn parts. Keep all guards, shields, and safety devices in place and in proper working order.

7.Do not change the engine governor settings or over speed the engine. Operating the engine at excessive speeds will increase the hazard of injury and can severely damage your machine.

8.Keep hands, feet and clothing away from rotating parts when operating mower.

9.Stop the blades and engine and set park brake before leaving the operators position for any reason.

10.Never make adjustments to the mower while engine and/or blades are running.

11.After striking a foreign object, stop mower and remove key. Inspect the mower for any damage and repair it immediately before continuing to mow.

12.Never operate this equipment in an enclosed or confined area without proper ventilation of the engine exhaust.

13.Do not allow any passengers to ride on the mower. It is designed for the operator only. Keep others away from the mower when in operation.

4

Image 4
Contents Operator’s Manual for Technical Assistance Table of Contents Safety MaintenanceSetup and Adjustments Trouble ShootingPreparation Safety TrainingOperation Safety TransportationEquipment Setup and Adjustments Cutting Height Adjustments Park BrakeMower Deck Leveling Reverse Spring Detent Adjustment Adjustments Mule Drive Belt TensionThrottle Lever Tension Adjustments Adjustments Motion Control Linkage Adjustment Operating Instructions ControlsOperating Instructions Starting and Operation Maintenance Maintenance Problem Possible Causes Wiring Diagram Service Record

ZTH5225A, ZTH5223A, ZTH6125A specifications

Husqvarna, a renowned name in outdoor power equipment, offers a range of zero-turn lawn mowers, including the ZTH5223A, ZTH5225A, and ZTH6125A models. Each of these models showcases advanced technology and features designed to enhance lawn care efficiency and user comfort.

The Husqvarna ZTH5223A is equipped with a robust 23 HP Kawasaki engine, providing reliable power for tackling various lawn conditions. Its cutting deck spans 52 inches, making it nimble enough for tight spaces while ensuring a swift mowing experience. The fully adjustable seat, combined with ergonomic controls, ensures operator comfort during extended use. The ZTH5223A features a dual hydrostatic transmission, allowing smooth and responsive maneuvering.

Moving up to the ZTH5225A, this model boasts a slightly more powerful 25 HP Kawasaki engine. It retains the 52-inch cutting deck but introduces a premium suspension system to enhance ride quality over uneven terrain. The ZTH5225A also includes an advanced air filtration system, ensuring the engine operates efficiently while prolonging its life. Enhanced operator controls make this model intuitive to use, providing a seamless mowing experience.

The ZTH6125A stands out with its 61-inch cutting deck, making it ideal for larger properties. With a powerful 25 HP engine, this model combines power with efficiency, capable of tackling thick grass and more challenging landscapes. The ZTH6125A integrates a high-performance hydrostatic transmission, providing precise speed control and agility. The model also features a patented deck lifting system, allowing for easy height adjustments on-the-go.

All three models are designed with durability in mind, using premium-quality materials that stand up to the rigors of frequent use. They are equipped with easy-access maintenance points to simplify routines such as oil changes and blade replacement. Husqvarna’s commitment to technology is evident through their incorporation of features like the Air Induction mowing technology, ensuring an even cut and minimized clumping, regardless of grass type.

In summary, the Husqvarna ZTH5223A, ZTH5225A, and ZTH6125A offer a range of powerful features such as efficient engines, durable construction, and operator-centered designs. Whether for small residential lawns or expansive commercial spaces, these zero-turn mowers are engineered to deliver exceptional performance and a superior mowing experience.