Adjustments Park Brake, Cutting Height | Husqvarna ZTH5223A specification

FIGURE 2

ADJUSTMENTS

PARK BRAKE:

1.Stop engine and remove key. Release park brake and measure the length of the spring. The distance between the washers on each end of the spring should be 2-7/8" (See Fig 2 ).

2.If adjustment is needed, loosen the nut below the spring. Then rotate nut to desired position so the proper distance between the washers is obtained. Check other side for proper adjustment.

3.Engage the brake lever and measure the distance between the trunnion pin and the collar welded to the brake rod. Distance should be 3/16" to 1/4" (See Fig 2 ).

4.If adjustment is needed, loosen the lock nut directly below the yoke. Using a wrench, rotate the rod by turning the double nuts using the nuts below the yoke and the nut you just loosened, to obtain the 3/16" to 1/4" distance. Tighten nut against yoke and check other side

for proper adjustment.

CUTTING HEIGHT:

1.Stop the mower and disengage the blades.

2.Raise the deck height lever to the transport position.

3.Remove the height adjustment pin and place it in the desired cutting height hole. Move deck height lever down onto the pin and mow. NOTE: anti-scalp rollers must be in the proper position for maximum deck floatation. See the decal on the front deck.

MOWER DECK LEVELING:

1.Position mower on a flat surface and stop engine.

2.Check the tire pressure of all four tires. Inflation should be 15 psi.

3.Place two 2x4’s on edge under the cutting deck from front to rear and lower the deck down onto the 2x4’s.

4.Adjust the four upper chain bolts to the center of the slot in the deck lift arms. NOTE: make sure deck lift blocks are tightly bolted to the frame (See Fig 3).

5.Return the deck height lever to the transport position (5" cutting height) and check the center to center distance of the swivels. Distance should be 19-1/2"

6.Check the distance between the washers on the deck lift springs. Distance should be 11-3/4" (See Fig 3).

7.Check chains for equal tension. If unequal, adjust upper chain bolt in slot.

8.Place deck in the 5" cutting height and measure from the cutting edge of the blade to a flat surface to check deck cutting height.

ZTH5225A, ZTH5223A, ZTH6125A specifications

Husqvarna, a renowned name in outdoor power equipment, offers a range of zero-turn lawn mowers, including the ZTH5223A, ZTH5225A, and ZTH6125A models. Each of these models showcases advanced technology and features designed to enhance lawn care efficiency and user comfort.

The Husqvarna ZTH5223A is equipped with a robust 23 HP Kawasaki engine, providing reliable power for tackling various lawn conditions. Its cutting deck spans 52 inches, making it nimble enough for tight spaces while ensuring a swift mowing experience. The fully adjustable seat, combined with ergonomic controls, ensures operator comfort during extended use. The ZTH5223A features a dual hydrostatic transmission, allowing smooth and responsive maneuvering.

Moving up to the ZTH5225A, this model boasts a slightly more powerful 25 HP Kawasaki engine. It retains the 52-inch cutting deck but introduces a premium suspension system to enhance ride quality over uneven terrain. The ZTH5225A also includes an advanced air filtration system, ensuring the engine operates efficiently while prolonging its life. Enhanced operator controls make this model intuitive to use, providing a seamless mowing experience.

The ZTH6125A stands out with its 61-inch cutting deck, making it ideal for larger properties. With a powerful 25 HP engine, this model combines power with efficiency, capable of tackling thick grass and more challenging landscapes. The ZTH6125A integrates a high-performance hydrostatic transmission, providing precise speed control and agility. The model also features a patented deck lifting system, allowing for easy height adjustments on-the-go.

All three models are designed with durability in mind, using premium-quality materials that stand up to the rigors of frequent use. They are equipped with easy-access maintenance points to simplify routines such as oil changes and blade replacement. Husqvarna’s commitment to technology is evident through their incorporation of features like the Air Induction mowing technology, ensuring an even cut and minimized clumping, regardless of grass type.

In summary, the Husqvarna ZTH5223A, ZTH5225A, and ZTH6125A offer a range of powerful features such as efficient engines, durable construction, and operator-centered designs. Whether for small residential lawns or expansive commercial spaces, these zero-turn mowers are engineered to deliver exceptional performance and a superior mowing experience.