Husqvarna M-ZT 52 /966793002 Know Your Blower System, Before Assembling Grass Catcher to Mower

Page 2

CONGRATULATIONS on the purchase of a new collection system. It has been designed, engineered and manufactured to give you the best possible dependability and performance.

Should you experience any problem you cannot easily remedy, please contact the nearest authorized service center/ department. They have competent, well- trained technicians and the proper tools for service and repairs.

Please read and retain this manual. The instructions will enable you to assemble and maintain the collection system properly. Always observe the

SAFETY RULES.

KNOW YOUR BLOWER SYSTEM

READ THIS OPERATION MANUAL AND SAFETY RULES BEFORE ASSEMBLING OR OPERATING THE BLOWER SYSTEM. Compare the illustrations with the carton contents and become familiar with the parts before starting the assembly. Study the operating instructions and safety precautions thoroughly to insure proper functioning of the Grass Catcher and to prevent injuries. Save this manual for future reference.

CAUTION

BEFORE ASSEMBLING GRASS CATCHER TO MOWER:

Set parking brake.

Place motion control levers in NEUTRAL position.

Turn ignition key OFF and remove key.

Make sure the blades and all moving parts have completely stopped.

CAUTION

DO NOT operate mower with grass catcher partially installed.

Disengage blades and stop engine before leaving mower seat to empty containers, unclogging chutes, etc.

Close cover before starting.

Disengage mower blades when crossing driveways or gravel surfaces and other areas where thrown objects could be a hazard.

DO NOT attempt to vacuum cans or other potentially hazardous projectiles.

CAUTION

The operation of any mower can result in foreign objects thrown into the eyes, which can result in severe eye damage. ALWAYS wear safety glasses or eye shields before starting the mower and while mowing. Standard safety glasses are recommended or a wide vision safety mask for over spectacles.

CAUTION

Do not leave grass in bagger containers. Empty containers after each use and before storing. Failure to do so may result in spontaneous combustion which could develop into a fire.

CAUTION

Grass catcher components are subject to wear, damage and deterioration, which could expose moving parts or allow objects to be thrown. Frequently check components and replace with manufacturer’s recommended parts, when necessary.

©2013 HTC. All Rights Reserved. Swainsboro, GA. Printed in U.S.A.

Image 2
Contents Operator and Parts Manual Know Your Blower System Before Assembling Grass Catcher to MowerContents General Operation Safety RulesService Slope Operation1DRIVE Pulley Assembly3MOUNTING Blower Assembly 2TRIMMING Blower4DRIVE Belt 5BELT Covers6BAGGER Mount 9MIDDLE Chute 8COVER Assembly7CHUTE Support 10UPPER Chute Assembly 11CHUTE / Hood Installation12WEIGHT Assembly General Recommendations OperationTips for Improved Bagging Blade CareRepair Parts Description Chutes QTY Description Item Part no Bagger Cover SUPPORT, Chute MOUNT, GUARD, Belt Description Item Part no 115 584027 Rev a 2013-02-15