ASSEMBLY
4DRIVE BELT
1.Make sure the tension release lever is forward (disengaged).
2.Place the belt over the pulley on the deck. Refer to illustration for proper routing.
3.Move the tension release arm to the rear and engage in the latch.
Outer Pulley
5BELT COVERS
1.Place the deck belt shield on the deck over the drive pulley and secure with hardware removed from steel belt shield.
2.Place retainer on the outer pulley cover.
3.Align the tab end of the belt cover into the slot on the deck belt shield and the other end over the end of the outer pulley cover.
4.Secure with knob.
Knob
Deck Belt Shield | Belt Cover Tab |
|
Middle Chute
Latch
Idler Pulleys | Belt Twist | Outer Pulley |
| ||
|
| Cover |
Retainer
6