Husqvarna 327HE4x-series, 327HDA65x series, 327HE3 x-series manual Fueling, Mixing

Page 14

FUEL HANDLING

Mixing

Always mix the gasoline and oil in a clean container intended for fuel.

Always start by filling half the amount of the gasoline to be used. Then add the entire amount of oil. Mix (shake) the fuel mixture. Add the remaining amount of gasoline.

Mix (shake) the fuel mixture thoroughly before filling the machine’s fuel tank.

Do not mix more than one month’s supply of fuel at a time.

If the machine is not used for some time the fuel tank should be emptied and cleaned.

 

!

WARNING! The catalytic converter

 

muffler gets very hot during and after

 

 

 

 

use. This also applies during idling. Be

 

 

aware of the fire hazard, especially when

 

 

working near flammable substances and/

 

 

or vapours.

 

 

 

Fueling

WARNING! Taking the following

!precautions, will lessen the risk of fire:

Do not smoke or place hot objects near fuel.

Always shut off the engine before refuelling.

Always stop the engine and let it cool for a few minutes before refuelling.

When refuelling, open the fuel cap slowly so that any excess pressure is released gently.

Tighten the fuel cap carefully after refuelling.

Always move the machine away from the refuelling area before starting.

Clean the area around the fuel cap. Contamination in the tank can cause operating problems.

Ensure that the fuel is well mixed by shaking the container before filling the tank.

14 – English

Image 14
Contents 327HDA65X-series KEY to Symbols SymbolsContents Introduction Dear customerWhat is WHAT? What is what?General Safety Precautions Personal protective equipmentMachine′s safety equipment Throttle lockoutVibration damping system Stop switchHand guard MufflerBlades Blade guardGear Fitting the hand guard and loop handle AssemblyAdjusting the harness Fitting the handleFitting the impact guard Fuel Fuel safetyFuel Handling Fueling MixingStarting and stopping Starting and StoppingCheck before starting StartingStopping Working Techniques Safety instructions regarding the surroundingsSafety instructions while working General working instructionsChanging the hedge trimmer angle Safety instructions after completing workBasic working techniques Are sharp and you could easily cut When you adjust the angle. The bladesTransport position YourselfMuffler MaintenanceCarburetor Cooling system Spark plugGear Cleaning the air filterAir filter Oiling the air filterCleaning and lubrication Maintenance schedule Maintenance Daily Weekly MonthlyTechnical Data Technical dataYour Warranty Rights and Obligations Emission Warranty Parts List Original instructions 1155690-95

327HE4x-series, 327HE3 x-series, 327HDA65x series specifications

The Husqvarna 327HDA65x series, 327HE4x-series, and 327HE3x-series are advanced hedge trimmers designed for both professional landscapers and homeowners who demand high performance and reliability. Each model in these series showcases Husqvarna’s commitment to innovation, ergonomics, and efficiency, making them some of the best choices in the market for hedge trimming.

Starting with the 327HDA65x series, these hedge trimmers are equipped with powerful engines that provide superior cutting performance. One of the standout features is the long-lasting, dual-sided cutting blades that ensure precision and efficiency, allowing users to tackle various hedge sizes with ease. The lightweight design combined with a well-balanced structure facilitates ease of use, reducing fatigue during extended trimming sessions. Additionally, the adjustable rear handle promotes a comfortable grip, enhancing control and maneuverability.

Moving over to the 327HE4x-series, these trimmers feature a robust, professional-grade engine design, optimized for performance and fuel efficiency. The 327HE4x models also incorporate articulated cutting heads, which allow for excellent reach and cutting angles, making it easier to trim high or hard-to-reach areas. The low vibration system significantly reduces operator fatigue, while the high blade speed ensures clean cuts that promote healthy growth in trimmed plants. With easier start technology, these models enable a reliable start in various weather conditions.

The 327HE3x-series further emphasizes user-friendly features, designed for an impressive combination of power and simplicity. These trimmers maintain the same high-quality blades found in the other series but often come with an emphasis on convenience features like easier blade adjustments for quicker maintenance and superior cutting efficiency. The 327HE3x models are particularly well-suited for residential users who require a reliable tool for their garden care.

Overall, what sets the 327HDA65x, 327HE4x, and 327HE3x-series apart is Husqvarna’s focus on durability, ergonomic design, and advanced cutting technology. Whether you are a professional landscaper or a dedicated gardener, these hedge trimmers provide the performance and versatility needed to achieve beautifully maintained hedges and shrubs. For anyone looking to invest in a quality hedge trimming solution, exploring the offerings in these series is a step towards achieving professional-grade results in lawn care.