Fuel Handling, Fuel safety | Husqvarna 327HE3 x-series specs

FUEL HANDLING

Fuel safety

Never start the machine:

1If you have spilled fuel on it. Wipe off the spillage and allow remaining fuel to evaporate.

2If you have spilled fuel on yourself or your clothes, change your clothes. Wash any part of your body that has come in contact with fuel. Use soap and water.

3If the machine is leaking fuel. Check regularly for leaks from the fuel cap and fuel lines.

Transport and storage

•Store and transport the machine and fuel so that there is no risk of any leakage or fumes coming into contact with sparks or naked ﬂames, for example, from electrical machinery, electric motors, electrical relays/ switches or boilers.

•When storing and transporting fuel always use approved containers intended for this purpose.

•When storing the machine for long periods the fuel tank must be emptied. Contact your local gas station to ﬁnd out where to dispose of excess fuel.

•Ensure the machine is cleaned and that a complete service is carried out before long-term storage.

•The transport guard must always be ﬁtted to the cutting attachment when the machine is being transported or in storage.

•Secure the machine during transport.

•In order to prevent unintentional starting of the engine, the spark plug cap must always be removed during long-term storage, if the machine is not under close supervision and when performing all service measures.

	!	WARNING! Take care when handling fuel.
	!	Bear in mind the risk of ﬁre, explosion
		Bear in mind the risk of ﬁre, explosion
		and inhaling fumes.

Fuel

CAUTION! The machine is equipped with a two-stroke engine and must always been run using a mixture of gasoline and two-stroke engine oil. It is important to accurately measure the amount of oil to be mixed to ensure that the correct mixture is obtained. When mixing small amounts of fuel, even small inaccuracies can drastically affect the ratio of the mixture.

	!	WARNING! Fuel and fuel fumes are
	!	highly inﬂammable and can cause
		highly inﬂammable and can cause
		serious injury when inhaled or allowed to
		come in contact with the skin. For this
		reason observe caution when handling
		fuel and make sure there is adequate
		ventilation.

Gasoline

CAUTION! Always use a quality gasoline/oil mixture with an octane rating of at least 87 octane ((RON+MON)/2). If your machine is equipped with a catalytic converter (see chapter on Technical data) always use a good quality unleaded gasoline/oil mixture. Leaded gasoline will destroy the catalytic converter.

Use low-emission gasoline, also known as alkylate gasoline, if it is available.

This engine is certiﬁed to operate on unleaded gasoline.

•The lowest recommended octane grade is 87 ((RON+MON)/2). If you run the engine on a lower octane grade than 87 so-called knocking can occur. This gives rise to a high engine temperature and increased bearing load, which can result in serious engine damage.

•When working at continuous high revs a higher octane rating is recommended.

Two-stroke oil

•For best results and performance use HUSQVARNA two-stroke engine oil, which is specially formulated for our air-cooled two stroke-engines.

•Never use two-stroke oil intended for water-cooled engines, sometimes referred to as outboard oil (rated TCW).

•Never use oil intended for four-stroke engines.

•Mixing ratio

1:50 (2%) with HUSQVARNA two-stroke oil.

Gasoline, litre	Two-stroke oil, litre

	2% (1:50)

5	0,10

10	0,20

15	0,30

20	0,40

US gallon	US ﬂ. oz.

1	2 1/2

2 1/2	6 1/2

5	12 7/8

English – 13

327HE4x-series, 327HE3 x-series, 327HDA65x series specifications

The Husqvarna 327HDA65x series, 327HE4x-series, and 327HE3x-series are advanced hedge trimmers designed for both professional landscapers and homeowners who demand high performance and reliability. Each model in these series showcases Husqvarna’s commitment to innovation, ergonomics, and efficiency, making them some of the best choices in the market for hedge trimming.

Starting with the 327HDA65x series, these hedge trimmers are equipped with powerful engines that provide superior cutting performance. One of the standout features is the long-lasting, dual-sided cutting blades that ensure precision and efficiency, allowing users to tackle various hedge sizes with ease. The lightweight design combined with a well-balanced structure facilitates ease of use, reducing fatigue during extended trimming sessions. Additionally, the adjustable rear handle promotes a comfortable grip, enhancing control and maneuverability.

Moving over to the 327HE4x-series, these trimmers feature a robust, professional-grade engine design, optimized for performance and fuel efficiency. The 327HE4x models also incorporate articulated cutting heads, which allow for excellent reach and cutting angles, making it easier to trim high or hard-to-reach areas. The low vibration system significantly reduces operator fatigue, while the high blade speed ensures clean cuts that promote healthy growth in trimmed plants. With easier start technology, these models enable a reliable start in various weather conditions.

The 327HE3x-series further emphasizes user-friendly features, designed for an impressive combination of power and simplicity. These trimmers maintain the same high-quality blades found in the other series but often come with an emphasis on convenience features like easier blade adjustments for quicker maintenance and superior cutting efficiency. The 327HE3x models are particularly well-suited for residential users who require a reliable tool for their garden care.

Overall, what sets the 327HDA65x, 327HE4x, and 327HE3x-series apart is Husqvarna’s focus on durability, ergonomic design, and advanced cutting technology. Whether you are a professional landscaper or a dedicated gardener, these hedge trimmers provide the performance and versatility needed to achieve beautifully maintained hedges and shrubs. For anyone looking to invest in a quality hedge trimming solution, exploring the offerings in these series is a step towards achieving professional-grade results in lawn care.