Jensen Tools VM9511TS instruction manual Fast Forward/Fast Reverse, Scanning, Goto Search, Zooming

Page 25

VM9511TS

Fast Forward/Fast Reverse

Press the >> button (14) on the remote control or the /\ button

(18)on the joystick to fast forward. Keep pressing and releasing the button to increase the rate from “2X” to “4X”, “8X”, and “20X”. Continue pressing the >> or /\ button to fast reverse.

Scanning

Press the SCN button (34) on the remote control to play the first ten seconds of each chapter. Press SCN again to stop the scan function and play the current chapter.

Selecting 2-Channel and 6-Channel Audio Playback

2-Channel Audio (Down Mix) Support for CD, SD Card and DVD

Linear pulse code modulation (LPCM) and pulse code modulation (PCM) support is available for CD, SD Card and DVD discs when 2-channel audio is selected.

6- Channel Audio Support for CD, SD Card and DVD

Pro-Logic II is available for decoding analog or digital 2- channel down mixed sources. Dolby Digital is available for decoding digital bit-stream sources.

NOTE: 2-channel audio support is available for AM/FM tuner, TV tuner, Aux Input, XM, iPod and Navigation only. 6-channel audio support is available for DVD/CD/CD-R and SD card.

Table 10: Speaker Output Options

Speaker Setup

Front

Rear

Center

Sub-

Spkr

Spkr

Spkr

Woofer

 

 

 

 

 

 

 

 

 

 

 

2CH mode

X

X

 

 

 

 

 

 

 

Play 2-channel (down

X

X

X

X

mix) audio in 6-chan-

 

 

 

 

nel mode with Pro-

 

 

 

 

Logic II "ON"

 

 

 

 

 

 

 

 

 

Play 6-channel audio

X

X

X

X

in 6-channel mode

 

 

 

 

with Dolby Digital

 

 

 

 

"ON"

 

 

 

 

 

 

 

 

 

Goto Search

During DVD or VCD playback, perform the following steps to use the GOTO feature to access a specific location on a disc:

1.Press the GOTO button (21) on remote control to enter “GO TO” mode.

2.Press the >> or << buttons (14, 22) on the remote control or the < or > buttons (16, 17) on the joystick to select a category (highlighted in blue).

•For DVD mode, you can choose Time or Title/Chapter search.

DVD Search

Time – Go to specific time in current title

Title/Chapter – Go to specific time in a chapter

•For VCD mode, press the GOTO button to choose between Track Search, Disc Search and Exit.

VCD Track Search

Time – Go to specific time in the current track

Track – Go to specific track

VCD Disc Search

Time – Go to specific time on disc

Track – Go to specific track

3.Enter a time into the field using the numeric keypad (29) on the remote control.

4.Press the >/ button (18) on the remote control or the ENTER (joystick) button (20) to go to the specified location on the disc.

5.Press the GOTO button again to exit.

Direct Chapter / Track Selection

During DVD, VCD and CD playback, you can use the numeric keypad on the remote control (29) to access a track directly.

Viewing an Alternate

Picture Angle (DVD

Only)

Some DVDs contain scenes that have been shot simultaneously from different angles. For discs recorded with multiple angles, press the ANGLE button (13) on the remote control to toggle available angles of the on-screen image.

Zooming

Press the ZOOM button (23) on the remote control to enlarge and pan through the video image using the following options: “Q1”, “Q2”, “Q3”, and “OFF”.

Multi-Language Discs (DVD Only)

Changing Audio Language

If you are watching a disc recorded in multiple languages, press the AUDIO button (5) on the remote control to choose a language.

Changing Subtitle Language

If you are watching a disc recorded in multiple languages with subtitles, press the SUBTITLE button (9) on the remote control to choose the language in which you would like the subtitles to appear.

NOTE: During VCD playback, press the AUDIO button (5) on the remote control to choose between Left Channel, Right Channel, and Stereo.

PBC (Play Back Control - VCD Only)

For VCDs with play back functionality, play back control (PBC) provides additional controls for VCD playback.

Press the MENU button (1) on the remote control to toggle the PBC function “On”/”Off”. Once PBC is on, playback starts from track one of the play list.

NOTE: When PBC is activated, fast forward, slow playback, and previous/next track are available. Repeat and direct track selection are not available.

When PBC is activated, selecting random, scan, or search playback automatically deactivates PBC.

Playback Information

During DVD and VCD playback, press the INFO button (10) on the remote control to display playback information on the screen, including the media playing and current playback time.

DVD Playback Information

The following information is displayed at the bottom of the screen during DVD playback:

•T : 5/8 – “5 / 8" indicates the fifth of 8 titles on the DVD is currently playing.

•C : 2/16 – “2 / 16" indicates that the second of 16 titles on the DVD is currently playing.

•00:41:28 – “00:41:28” indicates the playback time of the current title.

23

Page 24 Page 26
Image 25
Page 24 Page 26
Contents VM9511TS Contenido ContentsTable DES Matières Preparation FeaturesTools and Supplies IAUX3 Ready Sold Separately Disconnecting the BatteryWiring Diagram Wiring Diagram Multimedia Connections Installation Button Operation Controls and IndicatorsAudio 11 /RPT 10 /SCN12 /2-6CH/RDM 13 /STOPLCD Display/Indicators Front Zone Remote Control Function Front Zone Remote Control FunctionsRef# DVD VCD Tuner CD/MP3Function Name Ref# Multi-Zone Remote Control Functions Button Name Ref # MULTI-ZONE Remote ControlDVD VCD Using the TFT Monitor Monitor Protective Measures Monitor Movement MechanismOperating Instructions General Setup Menu System Setup MenuExiting the System Setup Menu ASP Audio Sound Processing Config MenuReturning to the System Setup Menu Accessing the ASP Config MenuSelecting a Source for the Front Zone MULTI-ZONE OperationSelecting a Source for the Rear Zone Multi-ZONE Source OptionsTuner Operation Channel/Category Guide Mode Preset ModeXM Radio Operation Displaying the Identification ID CodeXM Setup Menu Direct TuningCategory Guide Mode Diagnostic ModeDVD/VCD Video Operation Scanning Fast Forward/Fast ReverseSelecting 2-Channel and 6-Channel Audio Playback Goto SearchGeneral Disc Information Symbol MeaningVCD Playback Information Disc Properties Symbo 12cm Disc Properties Max PlayAccessing the DVD Setup Screen DVD/DISC Setup MenuAccessing a Menu Language MenuAudio Menu SPK Config MenuSurround Sound Rating Menu Features Setting Options Function Pro-Logic II Menu Features Setting Options FunctionRating Parental Lock Menu CD Player User Interface DVD/DISC Audio OperationMP3/WMA Operation VM9511TS SD Card Reader Operation Accessing SD Card ModeChange Directory Previous/NextIpod Operation Accessing iPod ModeControlling your iPod TV Tuner Operation Navigation System Troubleshooting TroubleshootingProblem Cause Corrective Action Error Messages Error MessagesMessage Displayed Cause Corrective Action Care and Maintenance Month Limited Warranty SpecificationsCEA Power Ratings

VM9511TS specifications

The Jensen Tools VM9511TS is a versatile tool that stands out in the realm of industrial and electronic maintenance. Designed for professionals who demand high performance and reliability, this tool encompasses several features and technologies that cater to a wide array of demanding tasks.

One of the primary characteristics of the VM9511TS is its robust build quality. Crafted from durable materials, it ensures longevity and withstands the rigors of heavy usage. The ergonomic design allows for comfortable handling, enabling users to work for extended periods without experiencing fatigue. This thoughtful design extends to the tool's weight distribution, making it easy to maneuver, even in tight spaces.

Equipped with a powerful motor, the VM9511TS delivers exceptional torque and speed, ensuring efficient performance for a variety of applications. The tool’s variable speed control allows users to adjust the speed settings according to the specific requirements of the task at hand, providing the flexibility needed for both delicate and rigorous jobs.

One of the standout technologies integrated into the VM9511TS is its electronic overload protection system. This feature not only enhances safety but also prolongs the life of the tool by preventing it from overheating during prolonged use. Additionally, the tool boasts a quick-change chuck, allowing for rapid swapping of bits and attachments, which saves critical time on the job.

The VM9511TS is also notable for its compact design, making it ideal for use in confined spaces. This design does not compromise on power, as the tool maintains impressive capability while remaining portable. Users will find that the tool’s light weight further aids in reducing strain, making it a go-to option for professionals who require mobility without sacrificing performance.

Other distinctive features include an LED light that illuminates the workspace, ensuring visibility even in dimly lit areas. This is particularly useful when working in tight spots or during late hours. The tool comes with a comprehensive set of compatible accessories, providing users with everything they need to get started immediately.

In summary, the Jensen Tools VM9511TS is a top-tier tool designed for versatility and efficiency. Its combination of robust construction, advanced technology, and user-friendly features makes it an indispensable asset for professionals in various fields, from electronics to general maintenance.
Top Page Image Contents