Jensen Tools VM9511TS instruction manual Installation

Page 7

VM9511TS

INSTALLATION

Pre-installation

1.Press the metal levers on both sides to remove the half- sleeve from the radio.

2.Remove the transport screws.

PREPARE RADIO

3.Install the half-sleeve.

a.Install adapter if necessary (optional).

b.Install half-sleeve into adapter or dashboard (use only the supplied screws). Do not force the sleeve into the opening or cause it to bend or bow.

c.Locate the series of bend-tabs along the top, bottom and sides of the mounting sleeve. With the sleeve fully inserted into the dashboard opening, bend as many of the tabs outward as necessary so that the sleeve is firmly secured to the dashboard.

d.Install support strap to make the unit more stable.

INSTALL HALF SLEEVE

3d

3c

3a

3b

CAUTION! Be careful not to damage the car wiring.

4.Place the radio in front of the dashboard opening so the wiring can be brought through the mounting sleeve.

Wiring

Complete wiring as illustrated in the wiring diagram on page

3.Once the wiring is complete, reconnect the battery negative terminal. If there is no ACC available, connect the ACC lead to the power supply with a switch.

NOTE: When replacing a fuse, be sure to use correct type and amperage to avoid damaging the radio. The VM9511TS uses one 15 amp mini-ATM fuse, located in the black filter box in-line with the main wire harness.

Final Installation

After completing the wiring connections, turn the unit on to confirm operation (ignition switch must be on). If unit does not operate, recheck all wiring until problem is corrected. Once proper operation is achieved, turn off the ignition switch and proceed with final mounting of the chassis.

1.Connect wiring adapter to existing wiring harness.

2.Connect antenna lead.

3.Carefully slide the radio into the half-sleeve, making sure it is right-side-up, until it is fully seated and the spring clips lock it into place.

NOTE: For proper operation of the CD/DVD player, the chassis must be mounted within 20° of horizontal. Make sure the unit is mounted within this limitation.

4.Attach one end of the perforated support strap (supplied) to the screw stud on the rear of the chassis using the hex nut provided. Fasten the other end of the perforated strap to a secure part of the dashboard either above or below the radio using the screw and hex nut provided. Bend the strap to position it as necessary.

CAUTION! The rear of the radio must be supported with the strap to prevent damage to the dashboard from the weight of the radio or improper operation due to vibration.

5.Replace any items you removed from the dashboard.

FINAL INSTALLATION

Final ISO-DIN Installation

1.Remove trim ring.

2.Mount factory brackets on new radio using existing screws from old radio.

3.Slide radio chassis into dash opening and secure.

4.Reinstall dash panel.

FINAL ISO-DIN INSTALLATION

Using the iAUX3 External AV Connector

The iAUX3 (sold separately) allows you to connect a variety of external devices, including a VCR, DVD player, portable MP3 player, etc., to your VM9511TS without removing the radio.

To install the iAUX3, connect it to the AUX-IN cables on the back of the VM9511TS (see the Wiring Diagram on page 3),

and then install the iAUX3 in a location convenient for plugging in auxiliary devices.

5

Page 6 Page 8
Image 7
Page 6 Page 8
Contents VM9511TS Contenido ContentsTable DES Matières Preparation FeaturesTools and Supplies IAUX3 Ready Sold Separately Disconnecting the BatteryWiring Diagram Wiring Diagram Multimedia Connections Installation Button Operation Controls and IndicatorsAudio 13 /STOP 10 /SCN11 /RPT 12 /2-6CH/RDMLCD Display/Indicators Front Zone Remote Control DVD VCD Tuner CD/MP3 Front Zone Remote Control FunctionsFunction Ref#Function Name Ref# Multi-Zone Remote Control Functions Button Name Ref # MULTI-ZONE Remote ControlDVD VCD Using the TFT Monitor Monitor Protective Measures Monitor Movement MechanismOperating Instructions General Setup Menu System Setup MenuAccessing the ASP Config Menu ASP Audio Sound Processing Config MenuExiting the System Setup Menu Returning to the System Setup MenuMulti-ZONE Source Options MULTI-ZONE OperationSelecting a Source for the Front Zone Selecting a Source for the Rear ZoneTuner Operation Displaying the Identification ID Code Preset ModeChannel/Category Guide Mode XM Radio OperationDiagnostic Mode Direct TuningXM Setup Menu Category Guide ModeDVD/VCD Video Operation Goto Search Fast Forward/Fast ReverseScanning Selecting 2-Channel and 6-Channel Audio PlaybackDisc Properties Symbo 12cm Disc Properties Max Play Symbol MeaningGeneral Disc Information VCD Playback InformationLanguage Menu DVD/DISC Setup MenuAccessing the DVD Setup Screen Accessing a MenuAudio Menu SPK Config MenuSurround Sound Rating Menu Features Setting Options Function Pro-Logic II Menu Features Setting Options FunctionRating Parental Lock Menu CD Player User Interface DVD/DISC Audio OperationMP3/WMA Operation VM9511TS Previous/Next Accessing SD Card ModeSD Card Reader Operation Change DirectoryIpod Operation Accessing iPod ModeControlling your iPod TV Tuner Operation Navigation System Troubleshooting TroubleshootingProblem Cause Corrective Action Error Messages Error MessagesMessage Displayed Cause Corrective Action Care and Maintenance Month Limited Warranty SpecificationsCEA Power Ratings

VM9511TS specifications

The Jensen Tools VM9511TS is a versatile tool that stands out in the realm of industrial and electronic maintenance. Designed for professionals who demand high performance and reliability, this tool encompasses several features and technologies that cater to a wide array of demanding tasks.

One of the primary characteristics of the VM9511TS is its robust build quality. Crafted from durable materials, it ensures longevity and withstands the rigors of heavy usage. The ergonomic design allows for comfortable handling, enabling users to work for extended periods without experiencing fatigue. This thoughtful design extends to the tool's weight distribution, making it easy to maneuver, even in tight spaces.

Equipped with a powerful motor, the VM9511TS delivers exceptional torque and speed, ensuring efficient performance for a variety of applications. The tool’s variable speed control allows users to adjust the speed settings according to the specific requirements of the task at hand, providing the flexibility needed for both delicate and rigorous jobs.

One of the standout technologies integrated into the VM9511TS is its electronic overload protection system. This feature not only enhances safety but also prolongs the life of the tool by preventing it from overheating during prolonged use. Additionally, the tool boasts a quick-change chuck, allowing for rapid swapping of bits and attachments, which saves critical time on the job.

The VM9511TS is also notable for its compact design, making it ideal for use in confined spaces. This design does not compromise on power, as the tool maintains impressive capability while remaining portable. Users will find that the tool’s light weight further aids in reducing strain, making it a go-to option for professionals who require mobility without sacrificing performance.

Other distinctive features include an LED light that illuminates the workspace, ensuring visibility even in dimly lit areas. This is particularly useful when working in tight spots or during late hours. The tool comes with a comprehensive set of compatible accessories, providing users with everything they need to get started immediately.

In summary, the Jensen Tools VM9511TS is a top-tier tool designed for versatility and efficiency. Its combination of robust construction, advanced technology, and user-friendly features makes it an indispensable asset for professionals in various fields, from electronics to general maintenance.
Top Page Image Contents