Husqvarna LTH125 owner manual Install Battery See Figs

Page 8

ASSEMBLY

INSTALL BATTERY (See Figs. 4 & 5)

CAUTION: Do not short battery termi- nals. Before installing battery, remove metal bracelets, wristwatch bands, rings, etc.

Positive terminal must be connected first to prevent sparking from acciden- tal grounding.

Lift seat to raised position.

Open battery box door.

Be sure battery drain tube is attached to battery box.

Lower battery into battery box with battery terminals toward front of tractor.

First connect RED battery cable to positive (+) terminal with hex bolt, flat washer, lock washer and hex nut as shown. Tighten securely.

Connect BLACK grounding cable to negative (-) termi- nal with remaining hex bolt, flat washer, lock washer and hex nut. Tighten securely.

Close battery box door.

Open battery box door for:

Inspection for secure connections (to tighten hard- ware).

Inspection for corrosion.

Testing battery.

Jumping (if required).

Periodic charging .

BATTERY

BOX DOOR

POSITIVE

NEGATIVE

(RED) CABLE

(BLACK) CABLE

LOCK

WASHER

FLAT

WASHER

 

HEX

HEX NUT

BOLT

POSITIVE (+) TERMINAL

NEGATIVE (-) TERMINAL

FIG. 4

BATTERY

BOX DOOR

VENT CAPS

FIG. 5

8

Image 8
Contents LTH125 Safety Rules Safe Operation Practices for Ride-On MowersModel Number LTH125 Serial Product SpecificationsCustomer Responsibilities Table of Contents Contents of Hardware Pack Assembly Tools Required for AssemblyTo Remove Tractor from Carton Before Rolling Tractor OFF SkidHOW to SET UP Your Tractor Check Tire PressureCheck Deck Levelness Check for Proper Position of ALL BeltsInstall Battery See Figs Install Mulcher Plate See Figs.6 To Convert to Bagging or DischargingOperation Know Your TractorHOW to USE Your Tractor ADD Gasoline Before Starting the EngineTo Operate on Hills Page Mowing Tips Mulching Mowing TipsLubrication Chart Customer ResponsibilitiesGeneral Recommendations Before Each USETractor Brake OperationTires Blade CareBattery See Fig To Clean Battery and TerminalsBelts Transaxle CoolingClean AIR Screen See Fig EngineLubrication AIR Filter See FigCleaning Engine Cooling Fins See FigMuffler Spark PlugsTo Remove Mower See Fig Service and AdjustmentsTo Install Mower See Fig To Level Mower Housing FRONT-TO-BACK Adjustment See FigsTo Adjust Brake See Fig Belt InstallationTo Replace Mower Blade Drive Belt See Fig To Replace Motion Drive Belt SeeTo Adjust Motion Control Lever See Transmission REMOVAL/REPLACEMENTTo Adjust Steering Wheel Alignment Front Wheel TOE-IN/CAMBERTo Start Engine with a Weak Battery See Fig To Remove Hood and Grill Assembly SeeTo Replace Fuse To Replace Headlight BulbTo Adjust Throttle Control Cable See To Adjust Carburetor See FigPreliminary Setting Final SettingStorage OtherTroubleshooting Points Problem Cause CorrectionOFF Schematic TRACTOR- -MODEL NO. LTH125 HC125H42C ElectricalKEY Part Description NO. no Chassis and Enclosures KEY Part Description Drive Repair Parts Steering and Front Axle Repair Parts Engine Repair Parts Seat LBD48 Wheels and TiresLSB42 Lift KEY Part NO. NO. Description Page Mower Deck HYDRO-GEAR Transaxle Model no KEY Part NO. no Description Service Notes Service Notes Page Warranty Statement Husqvarna Forest & Garden CORev