Husqvarna LTH1742T manual Transmission REMOVAL/REPLACEMENT, To Adjust Steering Wheel Alignment

Page 24

SERVICE AND ADJUSTMENTS

TRANSMISSION REMOVAL/REPLACEMENT

Should your transmission require removal for service or replacement, it should be purged after reinstallation and beforeoperating thetractor. See“PURGE TRANSMISSION” in the Operation section of this manual.

TO ADJUST STEERING WHEEL

ALIGNMENT

If steering wheel crossbars are not horizontal (left to right) when wheels are positioned straight forward, remove steer- ing wheel and reassemble per instructions in the Assembly section of this manual.

FRONT WHEEL TOE-IN/CAMBER

The front wheel toe-in and camber are not adjustable on your tractor. If damage has occurred to affect the front wheel toe-in or camber, contact your nearest authorized service center/department.

TO REMOVE WHEEL FOR REPAIRS (See Fig. 33)

Block up axle securely.

Remove axle cover, retaining ring and washers to allow wheel removal (rear wheel contains a square key - Do not lose).

Repair tire and reassemble.

On rear wheels only: align grooves in rear wheel hub and axle. Insert square key.

Replace washers and snap retaining ring securely in axle groove.

Replace axle cover.

NOTE: To seal tire punctures and prevent flat tires due to slow leaks, tire sealant may be purchased from your local parts dealer. Tire sealant also prevents tire dry rot and corrosion.

WASHERS

RETAINING

RING

AXLE

COVER

SQUARE KEY (REAR WHEEL ONLY)

Fig. 33

TO START ENGINE WITH A WEAK BATTERY (See Fig. 34)

WARNING: Lead-acid batteries gen- erate explosive gases. Keep sparks, flame and smoking materials away from batteries. Always wear eye protection when around batteries.

If your battery is too weak to start the engine, it should be recharged. (See "BATTERY" in the Maintenance section of this manual).

If “jumper cables” are used for emergency starting, follow this procedure:

IMPORTANT: YOUR TRACTOR IS EQUIPPED WITH A 12 VOLT SYSTEM. THE OTHER VEHICLE MUST ALSO BE A 12 VOLT SYSTEM. DO NOT USE YOUR TRACTOR BATTERY TO START OTHER VEHICLES.

TO ATTACH JUMPER CABLES -

Connect one end of the RED cable to the POSITIVE

(+)terminal of each battery(A-B), taking care not to short against tractor chassis.

Connect one end of the BLACK cable to the NEGATIVE (-) terminal (C) of fully charged battery.

Connect the other end of the BLACK cable (D) to good chassis ground, away from fuel tank and battery.

TO REMOVE CABLES, REVERSE ORDER -

BLACK cable first from chassis and then from the fully charged battery.

RED cable last from both batteries.

02614

WEAK OR DEAD

FULLY CHARGED

BATTERY

BATTERY

Fig. 34

24

Image 24
Contents LTH1742TWIN Safety Rules Safe Operation Practices for Ride-On MowersGeneral Operation II. Slope OperationService General ServiceIII. Children IV. TowingTable of Contents Unassembled Parts Steering WheelAssembly Tools Required for AssemblyTo Remove Tractor from Carton Before Removing Tractor from SkidInstall Seat See Figs Check Battery See FigAttach Hood Scoop See Fig Check Tire Pressure Check Deck LevelnessCheck for Proper Position of ALL Belts Check Brake SystemOperation Know Your Tractor HOW to USE Your Tractor To SET Parking Brake See FigStopping See Fig To USE Throttle Control D See FigTo Adjust Mower Cutting Height See Fig To Adjust Gauge Wheels See FigTo Move Forward and Backward See Fig To Operate on HillsService REMINDER/HOUR Meter To Transport See FigTowing Carts and Other Attachments To Operate MowerBefore Starting the Engine Check Engine OIL LevelADD Gasoline To Start Engine See FigMowing Tips Purge TransmissionMaintenance MaintenanceGeneral Recommendations ScheduleBattery TractorBlade Care Blade Removal See FigEngine Cleaning AIR FilterMuffler Spark PlugsService and Adjustments To Install Mower See FigsTo Remove Mower See Fig Raise attachment lift lever to highest position To Level Mower Belt Installation To Replace Mower Blade Drive Belt See FigTo Check Brake To Replace Motion Drive Belt See FigTransmission REMOVAL/REPLACEMENT To Adjust Steering Wheel AlignmentTo Start Engine with a Weak Battery See Fig Front Wheel TOE-IN/CAMBERTo Adjust Throttle Control Cable To Adjust Choke ControlTo Adjust Carburetor To Replace Headlight BulbStorage OtherFuel System Engine OILTroubleshooting Points Problem Cause CorrectionWith attachment clutch Service Notes Service Notes Suggested Guide for Sighting Slopes for Safe Operation 532 41 73-88 Rev 02.25.09 SR

LTH1742T specifications

The Husqvarna LTH1742T is a robust lawn tractor designed for homeowners who seek a reliable, efficient, and easy-to-use machine for maintaining their lawns. This model combines power, comfort, and innovative features that enable users to tackle various yard tasks with efficiency and ease.

One of the standout features of the LTH1742T is its powerful engine. Equipped with a 17-horsepower Briggs & Stratton single-cylinder engine, this lawn tractor can handle different terrains, providing ample power to cut through thick grass and tackle hilly landscapes. The engine is designed for ease of maintenance, ensuring that users can keep their machine in top condition without unnecessary hassle.

The cutting deck is another highlight of the LTH1742T. It comes with a 42-inch cutting width, making it suitable for medium to large yards. The deck features a triple-blade system, allowing for a clean and even cut, which not only enhances the appearance of your lawn but also promotes healthy grass growth. The cutting height is easily adjustable, offering six different positions so users can customize their mowing experience based on grass type and seasonal requirements.

The Husqvarna LTH1742T is designed with comfort in mind. The ergonomic seating provides ample support during long mowing sessions, while the steering wheel is positioned for optimal control. Another convenient feature is the easy-to-use automatic transmission, which allows for smooth acceleration and simple maneuvering without the need for constant gear shifting.

In terms of safety, the LTH1742T is equipped with an electric start system that eliminates the need for manual crank-starts. The safety features also include an operator presence switch, ensuring that the tractor will not operate unless the user is seated.

Additionally, this lawn tractor incorporates Husqvarna's innovative technologies such as the Air Induction Mowing Technology, which enhances airflow within the deck to provide superior cutting performance and ensures better grass collection.

Overall, the Husqvarna LTH1742T is engineered for efficiency, comfort, and performance. Its combination of power, cutting capabilities, and user-centric design makes it an excellent choice for homeowners looking to achieve a well-manicured lawn with minimal effort. Whether tackling overgrown areas or maintaining a well-kept yard, the LTH1742T stands out as a dependable workhorse ready for any challenge.