Husqvarna LT1536 Tools Required for Assembly, To Remove Tractor from Carton, Unpack Carton

Page 6

ASSEMBLY

Your new tractor has been assembled at the factory with exception of those parts left unassembled for shipping purposes. To ensure safe and proper operation of your tractor all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to insure proper tightness.

TOOLS REQUIRED FOR ASSEMBLY

A socket wrench set will make assembly easier. Standard wrench sizes are listed.

(2)

7/16" wrenches

Pliers

(1)

3/4" wrench

Tire pressure gauge

Utility knife

INSERT

5/16 HEX BOLT

5/16 LOCK WASHER

When right or left hand is mentioned in this manual, it means when you are in the operating position (seated behind the steering wheel).

TO REMOVE TRACTOR FROM CARTON

STEERING WHEEL

LARGE FLAT WASHER

STEERING

BOOT

UNPACK CARTON

•Remove all accessible loose parts and parts cartons from carton.

•Cut along dotted lines on all four panels of carton. Remove end panels and lay side panels flat.

•Check for any additional loose parts or cartons and remove.

BEFORE REMOVING TRACTOR FROM SKID

ATTACH STEERING WHEEL (See Fig. 1)

ASSEMBLE EXTENSION SHAFT AND BOOT

•Slide extension shaft onto lower steering shaft.

•Place tabs of steering boot over tab slots in dash and push down to secure.

TABS

ADAPTER

EXTENSION

SHAFT

LOWER

STEERING

SHAFT

TAB

SLOTS

FIG. 1

INSTALL STEERING WHEEL

•Position front wheels of the tractor so they are pointing straight forward.

•Remove steering wheel adapter from steering wheel and slide adapter onto steering shaft extension.

•Position steering wheel so cross bars are horizontal (left to right) and slide inside boot and onto adapter.

•Assemble large flat washer, 5/16 lock washer, 5/16 hex bolt and tighten securely.

•Snap steering wheel insert into center of steering wheel.

•Remove protective materials from tractor hood and grill.

IMPORTANT: CHECK FOR AND REMOVE ANY STAPLES IN SKID THAT MAY PUNCTURE TIRES WHERE TRACTOR IS TO ROLL OFF SKID.

INSTALL SEAT (See Fig. 2)

Adjust seat before tightening adjustment knob.

•Remove adjustment knob and flat washer securing seat to cardboard packing and set aside for assembly of seat to tractor.

•Pivot seat upward and remove from the cardboard pack- ing. Remove the cardboard packing and discard.

•Place seat on seat pan so head of shoulder bolt is positioned over large slotted hole in pan.

•Push down on seat to engage shoulder bolt in slot and pull seat towards rear of tractor.

•Pivot seat and pan forward and assemble adjustment knob and flat washer loosely. Do not tighten.

•Lower seat into operating position and sit on seat.

•Slide seat until a comfortable position is reached which allows you to press clutch/brake pedal all the way down.

•Get off seat without moving its adjusted position.

•Raise seat and tighten adjustment knob securely.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents LT1536 General Operation Safety RulesSafe Operation Practices for Ride-On Mowers II. Slope OperationIII. Children ServiceGeneral Service IV. TowingTable of Contents Key Unassembled PartsSteering Wheel Seat Slope SheetTo Remove Tractor from Carton AssemblyTools Required for Assembly Before Removing Tractor from SkidConnect Battery See Figs Check for Proper Position of ALL Belts Check Tire PressureCheck Deck Levelness Check Brake SystemOperation Know Your Tractor HOW to USE Your Tractor Before Starting the Engine Mowing Tips To Start Engine See FigGeneral Recommendations MaintenanceLubrication Chart Before Each USETractor Engine Engine OIL Filter CleaningAIR Filter MufflerService and Adjustments To Install Mower See FigTo Remove Mower See Fig To Level Mower Housing FRONT-TO-BACK Adjustment See FigsTo Check and Adjust Brake See Fig To Replace Mower Blade Drive Belt See FigTo Replace Motion Drive Belt See Fig Transaxle Gear Shift Lever NEUTRAL- Adjustment See FigTo Adjust Steering Wheel ALIGN- Ment Front Wheel TOE-IN/CAMBERTo Start Engine with a Weak Battery See Fig To Remove Wheel for Repairs See FigTo Replace Headlight Bulb To Adjust Carburetor To Adjust Throttle Control CableTo Adjust Choke Control Interlocks and RelaysFuel System StorageOther Engine OILTroubleshooting Points Problem Cause CorrectionWith attachment clutch Schematic Tractor Model NO. LT1536 HAU1536C, Product no 17Electrical KEY Part NO. NO. Description Chassis and Enclosures 532 19 39-37 Dash Drive 116KEY Part NO. no Description Steering Assembly KEY Part NO. NO. Description Engine KEY Part DescriptionMower Lift KEY PartSeat Assembly 532 19 01-20 SeatDecals Wheels & TiresMower Deck Repair Parts Policy Suggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across Hill Degrees MAXWarranty Statement

LT1536 specifications

The Husqvarna LT1536 is a versatile and efficient lawn tractor designed for homeowners seeking a reliable solution for their yard care needs. This model combines advanced technology with user-friendly features, making it an excellent choice for maintaining medium to large-sized lawns.

One of the standout features of the LT1536 is its powerful 15-horsepower engine. This reliable engine provides ample power for cutting grass effectively, allowing the tractor to tackle tough mowing conditions with ease. The engine also adheres to stringent emissions regulations, ensuring that it operates with minimal environmental impact.

The cutting deck of the LT1536 is designed for precision and efficiency. With a 36-inch cutting width, users can cover a larger area in less time. The deck features a robust design, allowing for a clean and even cut while preventing clumping and ensuring a healthy lawn. The cutting height is easily adjustable, enabling users to customize the cut according to their lawn's needs. This flexibility helps cater to various grass types and seasonal changes, promoting a lush and vibrant yard.

Husqvarna prioritizes user comfort and convenience in the LT1536. The tractor boasts an ergonomic seat and easy-to-reach controls, ensuring that users can operate the mower with minimal strain. Additionally, the compact design allows for easy maneuverability around obstacles such as trees and flower beds, enhancing the overall mowing experience.

This model is equipped with Husqvarna's innovative technology, including the Ready Start system, which makes starting the engine a hassle-free process. The automatic choke eliminates the need for manual adjustments, allowing for a straightforward and reliable start-up each time. Moreover, the LT1536 features a durable and sturdy frame, built to withstand the rigors of mowing while ensuring longevity.

For those seeking versatility, the LT1536 accommodates a range of optional accessories like grass collectors and mulching kits, making it adaptable to different lawn care tasks. Whether you need to bag clippings, mulch leaves, or simply mow, this lawn tractor provides the flexibility to handle various challenges.

In conclusion, the Husqvarna LT1536 is an excellent investment for homeowners looking for a reliable, efficient, and easy-to-use lawn tractor. With its powerful engine, advanced cutting deck design, and user-friendly features, it stands out as a premier choice in the world of lawn care equipment, making yard maintenance both manageable and enjoyable.
Top Page Image Contents