Husqvarna LT1536 owner manual Check Tire Pressure, Check Deck Levelness, Check Brake System

Page 8

ASSEMBLY

TO DRIVE TRACTOR OFF SKID (See Op- eration section for location and function of controls)

WARNING: Before starting, read, understand and follow all instructions in the Operation section of this manual. Be sure tractor is in a well-ventilated area. Be sure the area in front of tractor is clear of other people and objects.

•Be sure all the above assembly steps have been com- pleted.

•Check engine oil level and fill fuel tank with gasoline.

•Sit on seat in operating position, depress clutch/brake pedal and set the parking brake.

•Place gear shift lever in neutral (N) position.

•Press lift lever plunger and raise attachment lift lever to its highest position.

•Start the engine.After engine has started, move throttle control to idle position.

•Depress clutch/brake pedal into full "BRAKE" position and hold. Move gearshift lever to 1st gear.

•Slowly release clutch/brake pedal and slowly drive tractor off skid.

•Apply brake to stop tractor, set parking brake and place gearshift lever in neutral position.

•Turn ignition key to "OFF" position.

Continue with the instructions that follow.

CHECK TIRE PRESSURE

The tires on your tractor were overinflated at the factory for shipping purposes. Correct tire pressure is important for best cutting performance.

•Reduce tire pressure to PSI shown in “PRODUCT SPECIFICATIONS” section of this manual.

CHECK DECK LEVELNESS

For best cutting results, mower housing should be properly leveled. See“TO LEVEL MOWER HOUSING”in the Service and Adjustments section of this manual.

CHECK FOR PROPER POSITION OF ALL BELTS

See the figures that are shown for replacing motion and mower blade drive belts in the Service and Adjustments section of this manual. Verify that the belts are routed correctly.

CHECK BRAKE SYSTEM

After you learn how to operate your tractor, check to see that the brake is properly adjusted. See “TO ADJUST BRAKE” in the Service and Adjustments section of this manual.

✓CHECKLIST

BEFOREYOU OPERATE AND ENJOYYOUR NEW TRAC- TOR, WE WISH TO ASSURE THAT YOU RECEIVE THE BEST PERFORMANCE AND SATISFACTION FROMTHIS QUALITY PRODUCT.

PLEASE REVIEW THE FOLLOWING CHECKLIST:

✓All assembly instructions have been completed.

✓No remaining loose parts in carton.

✓Battery is properly prepared and charged. (Minimum 1 hour at 6 amps).

✓Seat is adjusted comfortably and tightened securely.

✓All tires are properly inflated. (For shipping purposes, the tires were overinflated at the factory).

✓Be sure mower deck is properly leveled side-to-side/ front-to-rear for best cutting results. (Tires must be properly inflated for leveling).

✓Check mower and drive belts. Be sure they are routed properly around pulleys and inside all belt keepers.

✓Check wiring. See that all connections are still secure and wires are properly clamped.

WHILE LEARNING HOW TO USE YOUR TRACTOR, PAY EXTRA ATTENTION TO THE FOLLOWING IMPORTANT ITEMS:

✓Engine oil is at proper level.

✓Fuel tank is filled with fresh, clean, regular unleaded gasoline.

✓Become familiar with all controls - their location and function. Operate them before you start the engine.

✓Be sure brake system is in safe operating condition.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents LT1536 Safety Rules Safe Operation Practices for Ride-On MowersGeneral Operation II. Slope OperationService General ServiceIII. Children IV. TowingTable of Contents Unassembled Parts Steering Wheel SeatKey Slope SheetAssembly Tools Required for AssemblyTo Remove Tractor from Carton Before Removing Tractor from SkidConnect Battery See Figs Check Tire Pressure Check Deck LevelnessCheck for Proper Position of ALL Belts Check Brake SystemOperation Know Your Tractor HOW to USE Your Tractor Before Starting the Engine Mowing Tips To Start Engine See FigMaintenance Lubrication ChartGeneral Recommendations Before Each USETractor Engine Cleaning AIR FilterEngine OIL Filter MufflerTo Remove Mower See Fig Service and AdjustmentsTo Install Mower See Fig To Level Mower Housing FRONT-TO-BACK Adjustment See FigsTo Check and Adjust Brake See Fig To Replace Mower Blade Drive Belt See FigTransaxle Gear Shift Lever NEUTRAL- Adjustment See Fig To Adjust Steering Wheel ALIGN- MentTo Replace Motion Drive Belt See Fig Front Wheel TOE-IN/CAMBERTo Replace Headlight Bulb To Start Engine with a Weak Battery See FigTo Remove Wheel for Repairs See Fig To Adjust Throttle Control Cable To Adjust Choke ControlTo Adjust Carburetor Interlocks and RelaysStorage OtherFuel System Engine OILTroubleshooting Points Problem Cause CorrectionWith attachment clutch Schematic Tractor Model NO. LT1536 HAU1536C, Product no 17Electrical KEY Part NO. NO. Description Chassis and Enclosures 532 19 39-37 Dash Drive 116KEY Part NO. no Description Steering Assembly KEY Part NO. NO. Description Engine KEY Part DescriptionMower Lift KEY PartSeat Assembly 532 19 01-20 SeatDecals Wheels & TiresMower Deck Repair Parts Policy Suggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across Hill Degrees MAXWarranty Statement

LT1536 specifications

The Husqvarna LT1536 is a versatile and efficient lawn tractor designed for homeowners seeking a reliable solution for their yard care needs. This model combines advanced technology with user-friendly features, making it an excellent choice for maintaining medium to large-sized lawns.

One of the standout features of the LT1536 is its powerful 15-horsepower engine. This reliable engine provides ample power for cutting grass effectively, allowing the tractor to tackle tough mowing conditions with ease. The engine also adheres to stringent emissions regulations, ensuring that it operates with minimal environmental impact.

The cutting deck of the LT1536 is designed for precision and efficiency. With a 36-inch cutting width, users can cover a larger area in less time. The deck features a robust design, allowing for a clean and even cut while preventing clumping and ensuring a healthy lawn. The cutting height is easily adjustable, enabling users to customize the cut according to their lawn's needs. This flexibility helps cater to various grass types and seasonal changes, promoting a lush and vibrant yard.

Husqvarna prioritizes user comfort and convenience in the LT1536. The tractor boasts an ergonomic seat and easy-to-reach controls, ensuring that users can operate the mower with minimal strain. Additionally, the compact design allows for easy maneuverability around obstacles such as trees and flower beds, enhancing the overall mowing experience.

This model is equipped with Husqvarna's innovative technology, including the Ready Start system, which makes starting the engine a hassle-free process. The automatic choke eliminates the need for manual adjustments, allowing for a straightforward and reliable start-up each time. Moreover, the LT1536 features a durable and sturdy frame, built to withstand the rigors of mowing while ensuring longevity.

For those seeking versatility, the LT1536 accommodates a range of optional accessories like grass collectors and mulching kits, making it adaptable to different lawn care tasks. Whether you need to bag clippings, mulch leaves, or simply mow, this lawn tractor provides the flexibility to handle various challenges.

In conclusion, the Husqvarna LT1536 is an excellent investment for homeowners looking for a reliable, efficient, and easy-to-use lawn tractor. With its powerful engine, advanced cutting deck design, and user-friendly features, it stands out as a premier choice in the world of lawn care equipment, making yard maintenance both manageable and enjoyable.
Top Page Image Contents