Husqvarna LT1538 owner manual HOW to USE Your Tractor

Page 11

OPERATION

The operation of any tractor can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields while op- erating your tractor or performing any adjustments or repairs. We recommend a wide vision safety mask over spectacles or standard safety glasses.

HOW TO USE YOUR TRACTOR

TO SET PARKING BRAKE (See Fig. 6)

Your tractor is equipped with an operator presence sens- ing switch. When engine is running, any attempt by the operator to leave the seat without first setting the parking brake will shut off the engine.

•Depress clutch/brake pedal into full “BRAKE” position and hold.

•Place parking brake lever in “ENGAGED” position and release pressure from clutch/brake pedal. Pedal should remain in “BRAKE” position. Make sure parking brake will hold tractor secure.

IMPORTANT: LEAVING THE IGNITION SWITCH IN ANY POSITION OTHER THAN "OFF" WILL CAUSE THE BATTERY TO BE DISCHARGED, (DEAD).

NOTE: Under certain conditions when tractor is standing idle with the engine running, hot engine exhaust gases may cause “browning” of grass. To eliminate this possibility, al- ways stop engine when stopping tractor on grass areas.

CAUTION: Always stop tractor com- pletely,as described above,before leav- ing the operator's position; to empty grass catcher, etc.

ATTACHMENT CLUTCH LEVER "ENGAGED" POSITION

THROTTLE/CHOKE

CONTROL LEVER

IGNITION KEY

"DISENGAGED" POSITION

PARKING BRAKE "ENGAGED"

POSITION

"BRAKE"

POSITIONGEARSHIFT

LEVER

CLUTCH/BRAKE PEDAL

PARKING BRAKE

"DRIVE" POSITION

"DISENGAGED" POSITION

 

FIG. 6

STOPPING (See Fig. 6)

MOWER BLADES -

•To stop mower blades,move attachment clutch lever to “DISENGAGED” position.

GROUND DRIVE -

•To stop ground drive, depress clutch/brake pedal into full “BRAKE” position.

•Move gearshift lever to neutral (N) position.

ENGINE -

•Move throttle control between half and full speed (fast) position.

NOTE: Failure to move throttle control between half and full speed (fast) position, before stopping may cause engine to “backfire”.

•Turn ignition key to “OFF” position and remove key. Always remove key when leaving tractor to prevent unauthorized use.

•Never use choke to stop engine.

TO USE THROTTLE CONTROL (See Fig. 6)

Always operate engine at full throttle.

•Operating engine at less than full throttle reduces the battery charging rate.

•Full throttle offers the best bagging and mower perfor- mance.

TO MOVE FORWARD AND BACKWARD (See Fig. 6)

The direction and speed of movement is controlled by the gearshift lever.

•Start tractor with clutch/brake pedal depressed and gearshift lever in neutral (N) position.

•Move gearshift lever to desired position.

•Slowly release clutch/brake pedal to start move- ment.

IMPORTANT: BRING TRACTOR TO A COMPLETE STOP BEFORE SHIFTING OR CHANGING GEARS. FAILURE TO DO SO WILL SHORTEN THE USEFUL LIFE OF YOUR TRANSAXLE.

TO ADJUST MOWER CUTTING HEIGHT (See Fig. 6)

The position of the attachment lift lever determines the cutting height.

•Grasp lift lever.

•Press plunger with thumb and move lever to desired position.

The cutting height range is approximately 1-1/2 to 4". The heights are measured from the ground to the blade tip with the engine not running. These heights are approximate and may vary depending upon soil conditions, height of grass and types of grass being mowed.

•The average lawn should be cut to approximately 2-1/2 inches during the cool season and to over 3 inches during hot months. For healthier and better looking lawns, mow often and after moderate growth.

•For best cutting performance, grass over 6 inches in height should be mowed twice. Make the first cut relatively high; the second to desired height.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents LT1538 III. Children IV. ServiceGeneral Operation II. Slope OperationSafe Operation Practices for Ride-On Mowers Table of Contents Steering Wheel Seat Unassembled PartsTo Remove Tractor from Carton AssemblyTools Required for Assembly HOW to SET UP Your TractorDischarging Check Brake System Check Tire PressureCheck Deck Levelness Check for Proper Position of ALL BeltsOperation Know Your Tractor HOW to USE Your Tractor Before Starting the Engine Mulching Mowing Tips Mowing TipsTo Start Engine See Fig Before Each USE MaintenanceService Dates General RecommendationsOperator Presence System TractorBrake Operation TiresTransaxle Cooling BatteryEngine BeltsEngine OIL Filter Clean AIR ScreenClean AIR INTAKE/COOLING Areas AIR Filter See FigIN-LINE Fuel Filter See Fig CleaningMuffler Spark PlugsTo Remove Mower See Fig Service and AdjustmentsTo Install Mower See Fig Belt Removal To Level Mower HousingBelt Installation To Replace Mower Blade Drive Belt See FigTo Check Brake To Check and Adjust Brake See FigTo Adjust Brake To Replace Motion Drive Belt See FigFront Wheel TOE-IN/CAMBER To Adjust Steering Wheel ALIGN- MentTransaxle Gear Shift Lever NEU- Tral To Replace Fuse To Adjust CarburetorTo Replace Headlight Bulb Interlocks and RelaysEngine OIL StorageOther Fuel SystemTroubleshooting Points OFF Tractor - Model NO. LT1538 LT1538A, Product no 56 SchematicElectrical KEY Part Description Chassis and Enclosures Repair Parts Drive KEY Part NO. NO. Description Steering Assembly Repair Parts 532 14 Seat Seat AssemblyWheels & Tires DecalsEngine KEY Part NO. NO. Description Mower Deck KEY Part Description Mower Lift Repair Parts Page Page Warranty Statement Only Ride UP and Down Hill Not Across Hill Degrees MAX Suggested Guide for Sighting Slopes for Safe Operation532 18 43-98 11.12.02 RH

LT1538 specifications

The Husqvarna LT1538 is a robust garden tractor designed for homeowners who seek efficiency and comfort while maintaining their lawns. Equipped with a powerful 15 HP engine, the LT1538 delivers reliable performance, ensuring that mowing and other tasks are handled with ease. This garden tractor stands out due to its impressive combination of features, technologies, and user-friendly characteristics.

One of the key features of the LT1538 is its 38-inch cutting deck, which allows for precise and efficient mowing of medium-sized lawns. The deck comes with a spring-assisted lifting mechanism, making it easy to adjust cutting heights from 1 to 4 inches. This flexibility ensures that users can achieve the desired grass length easily, adapting to different lawn conditions and personal preferences.

The Husqvarna LT1538 also integrates an innovative air induction technology that enhances grass lift, resulting in an even cut every time. This technology promotes better airflow, allowing the mower to handle damp grass more effectively. Coupled with the sharp, durable blades, it ensures that your lawn is left looking pristine after each mowing session.

Another significant aspect of the LT1538 is its user-friendly controls and ergonomic design. The comfortable seat with adjustable options provides ample support for extended mowing sessions. The intuitive dashboard houses essential controls, including an easy-to-read fuel gauge and cutting height adjustment, making operation straightforward for users of all experience levels.

For ease of operation, the LT1538 features an automatic transmission, allowing users to navigate various terrains without constant gear shifting. This system enables smooth acceleration and deceleration, taking the stress out of mowing and making it an enjoyable experience.

Furthermore, the Husqvarna LT1538 is designed with durability in mind. Its rugged frame and durable components ensure longevity even when faced with regular use. The mower also includes a washout port for effortless deck cleaning, helping to maintain performance and prolong the life of the blades.

In summary, the Husqvarna LT1538 garden tractor combines power, efficiency, and ease of use, making it a standout choice for homeowners. With its reliable engine, advanced cutting technology, ergonomic design, and robust construction, the LT1538 is well-equipped to handle a variety of mowing tasks, ensuring that your lawn remains well-groomed with minimal effort.
Top Page Image Contents