Husqvarna LT1538 owner manual Storage, Other, Fuel System, Engine OIL, Cylinders

Page 24

STORAGE

Immediately prepare your tractor for storage at the end of the season or if the tractor will not be used for 30 days or more.

WARNING: Never store the tractor with gasoline in the tank inside a building where fumes may reach an open flame or spark. Allow the engine to cool before storing in any enclosure.

TRACTOR

Remove mower from tractor for winter storage. When mower is to be stored for a period of time, clean it thoroughly, remove all dirt, grease, leaves, etc. Store in a clean, dry area.

Clean entire tractor (See “CLEANING” in the Mainte- nance section of this manual).

Inspect and replace belts, if necessary (See belt re- placement instructions in the Service and Adjustments section of this manual).

Lubricate as shown in the Maintenance section of this manual.

Be sure that all nuts, bolts and screws are securely fastened. Inspect moving parts for damage, breakage and wear. Replace if necessary.

Touch up all rusted or chipped paint surfaces; sand lightly before painting.

BATTERY

Fully charge the battery for storage.

After a period of time in storage, battery may require recharging.

To help prevent corrosion and power leakage during long periods of storage, battery cables should be dis- connected and battery cleaned thoroughly (see “TO CLEAN BATTERY AND TERMINALS” in the Mainte- nance section of this manual).

After cleaning, leave cables disconnected and place cables where they cannot come in contact with battery terminals.

If battery is removed from tractor for storage, do not store battery directly on concrete or damp surfaces.

ENGINE

FUEL SYSTEM

IMPORTANT: IT IS IMPORTANTTO PREVENT GUM DEPOSITS FROM FORMING IN ESSENTIAL FUEL SYSTEM PARTS SUCH AS CARBURETOR, FUEL FILTER, FUEL HOSE, OR TANK DURING STORAGE. ALSO, EXPERIENCE INDICATES THAT ALCOHOL BLENDED FUELS (CALLED GASOHOL OR USING ETHANOL OR METHANOL) CAN ATTRACT MOISTUREWHICH LEADSTO SEPARATION AND FORMATION OF ACIDS DURING STORAGE. ACIDIC GAS CAN DAMAGE THE FUEL SYSTEM OF AN ENGINE WHILE IN STORAGE.

Drain the fuel tank.

Start the engine and let it run until the fuel lines and carburetor are empty.

Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.

Use fresh fuel next season.

NOTE: Fuel stabilizer is an acceptable alternative in mini- mizing the formation of fuel gum deposits during storage. Add stabilizer to gasoline in fuel tank or storage container. Always follow the mix ratio found on stabilizer container. Run engine at least 10 minutes after adding stabilizer to allow the stabilizer to reach the carburetor. Do not drain the gas tank and carburetor if using fuel stabilizer.

ENGINE OIL

Drain oil (with engine warm) and replace with clean en- gine oil. (See “ENGINE” in the Maintenance section of this manual).

CYLINDER(S)

Remove spark plug(s).

Pour one ounce of oil through spark plug hole(s) into cylinder(s).

Turn ignition key to “START” position for a few seconds to distribute oil.

Replace with new spark plug(s).

OTHER

Do not store gasoline from one season to another.

Replace your gasoline can if your can starts to rust. Rust and/or dirt in your gasoline will cause problems.

If possible, store your tractor indoors and cover it to give protection from dust and dirt.

Cover your tractor with a suitable protective cover that does not retain moisture. Do not use plastic. Plastic cannot breathe which allows condensation to form and will cause your tractor to rust.

IMPORTANT: NEVER COVERTRACTORWHILE ENGINE AND EXHAUST AREAS ARE STILL WARM.

24

Image 24
Contents LT1538 IV. Service General OperationII. Slope Operation III. ChildrenSafe Operation Practices for Ride-On Mowers Table of Contents Unassembled Parts Steering Wheel SeatAssembly Tools Required for AssemblyHOW to SET UP Your Tractor To Remove Tractor from CartonDischarging Check Tire Pressure Check Deck LevelnessCheck for Proper Position of ALL Belts Check Brake SystemOperation Know Your Tractor HOW to USE Your Tractor Before Starting the Engine Mowing Tips To Start Engine See FigMulching Mowing Tips Maintenance Service DatesGeneral Recommendations Before Each USETractor Brake OperationTires Operator Presence SystemBattery EngineBelts Transaxle CoolingClean AIR Screen Clean AIR INTAKE/COOLING AreasAIR Filter See Fig Engine OIL FilterCleaning MufflerSpark Plugs IN-LINE Fuel Filter See FigService and Adjustments To Install Mower See FigTo Remove Mower See Fig To Level Mower Housing Belt InstallationTo Replace Mower Blade Drive Belt See Fig Belt RemovalTo Check and Adjust Brake See Fig To Adjust BrakeTo Replace Motion Drive Belt See Fig To Check BrakeTo Adjust Steering Wheel ALIGN- Ment Transaxle Gear Shift Lever NEU- TralFront Wheel TOE-IN/CAMBER To Adjust Carburetor To Replace Headlight BulbInterlocks and Relays To Replace FuseStorage OtherFuel System Engine OILTroubleshooting Points OFF Schematic Tractor - Model NO. LT1538 LT1538A, Product no 56Electrical KEY Part Description Chassis and Enclosures Repair Parts Drive KEY Part NO. NO. Description Steering Assembly Repair Parts Seat Assembly 532 14 SeatDecals Wheels & TiresEngine KEY Part NO. NO. Description Mower Deck KEY Part Description Mower Lift Repair Parts Page Page Warranty Statement Suggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across Hill Degrees MAX532 18 43-98 11.12.02 RH

LT1538 specifications

The Husqvarna LT1538 is a robust garden tractor designed for homeowners who seek efficiency and comfort while maintaining their lawns. Equipped with a powerful 15 HP engine, the LT1538 delivers reliable performance, ensuring that mowing and other tasks are handled with ease. This garden tractor stands out due to its impressive combination of features, technologies, and user-friendly characteristics.

One of the key features of the LT1538 is its 38-inch cutting deck, which allows for precise and efficient mowing of medium-sized lawns. The deck comes with a spring-assisted lifting mechanism, making it easy to adjust cutting heights from 1 to 4 inches. This flexibility ensures that users can achieve the desired grass length easily, adapting to different lawn conditions and personal preferences.

The Husqvarna LT1538 also integrates an innovative air induction technology that enhances grass lift, resulting in an even cut every time. This technology promotes better airflow, allowing the mower to handle damp grass more effectively. Coupled with the sharp, durable blades, it ensures that your lawn is left looking pristine after each mowing session.

Another significant aspect of the LT1538 is its user-friendly controls and ergonomic design. The comfortable seat with adjustable options provides ample support for extended mowing sessions. The intuitive dashboard houses essential controls, including an easy-to-read fuel gauge and cutting height adjustment, making operation straightforward for users of all experience levels.

For ease of operation, the LT1538 features an automatic transmission, allowing users to navigate various terrains without constant gear shifting. This system enables smooth acceleration and deceleration, taking the stress out of mowing and making it an enjoyable experience.

Furthermore, the Husqvarna LT1538 is designed with durability in mind. Its rugged frame and durable components ensure longevity even when faced with regular use. The mower also includes a washout port for effortless deck cleaning, helping to maintain performance and prolong the life of the blades.

In summary, the Husqvarna LT1538 garden tractor combines power, efficiency, and ease of use, making it a standout choice for homeowners. With its reliable engine, advanced cutting technology, ergonomic design, and robust construction, the LT1538 is well-equipped to handle a variety of mowing tasks, ensuring that your lawn remains well-groomed with minimal effort.