Husqvarna LT1538 owner manual Before Starting the Engine

Page 12

OPERATION

TO OPERATE MOWER (See Fig.7)

Your tractor is equipped with an operator presence sensing switch. Any attempt by the operator to leave the seat with the engine running and the attachment clutch engaged will shut off the engine.

•Select desired height of cut.

•Start mower blades by engaging attachment clutch control.

•TO STOP MOWER BLADES - disengage attachment clutch control.

"ENGAGED" POSITION

ATTACHMENT LIFT LEVER HIGH POSITION

LOW

POSITION

ATTACHMENT CLUTCH LEVER "DISENGAGED" POSITION

DEFLECTOR

SHIELD

FIG. 7

CAUTION: Do not operate the mower without either the entire grass catcher, on mowers so equipped,or the deflector shield in place.

TO OPERATE ON HILLS

WARNING: Do not drive up or down hills with slopes greater than 15° and do not drive across any slope.

•Choose the slowest speed before starting up or down hills.

•Avoid stopping or changing speed on hills.

•If slowing is necessary, move throttle control lever to slower position.

•If stopping is absolutely necessary, push clutch/brake pedal quickly to brake position and engage parking brake.

•Move gearshift lever to 1st gear. Be sure you have allowed room for tractor to roll slightly as you restart movement.

•To restart movement, slowly release parking brake and clutch/brake pedal.

•Make all turns slowly.

TO TRANSPORT

•Raise attachment lift to highest position with attachment lift control.

•When pushing or towing your tractor, be sure gearshift lever is in neutral (N) position.

•Do not push or tow tractor at more than five (5) MPH.

NOTE: To protect hood from damage when transporting your tractor on a truck or a trailer, be sure hood is closed and secured to tractor. Use an appropriate means of tying hood to tractor (rope, cord, etc.).

TOWING CARTS AND OTHER

ATTACHMENTS

Tow only the attachments that are recommended by and comply with specifications of the manufacturer of your trac- tor. Use common sense when towing. Too heavy of a load, while on a slope, is dangerous. Tires can lose traction with the ground and cause you to lose control of your tractor.

BEFORE STARTING THE ENGINE

CHECK ENGINE OIL LEVEL

•The engine in your tractor has been shipped, from the factory, already filled with summer weight oil.

•Check engine oil with tractor on level ground.

•Unthread and remove oil fill cap/dipstick; wipe oil off. Reinsert the dipstick into the tube and rest oil fill cap on the tube. Do not thread the cap onto the tube. Remove and read oil level. If necessary, add oil until “FULL” mark on dipstick is reached. Do not overfill.

•For cold weather operation you should change oil for easier starting (See “OIL VISCOSITY CHART” in the Maintenance section of this manual).

•To change engine oil, see the Maintenance section in this manual.

ADD GASOLINE

•Fill fuel tank to bottom of filler neck. Do not overfill. Use fresh, clean, regular unleaded gasoline with a minimum of 87 octane. (Use of leaded gasoline will increase carbon and lead oxide deposits and reduce valve life). Do not mix oil with gasoline. Purchase fuel in quantities that can be used within 30 days to assure fuel freshness.

CAUTION: Wipe off any spilled oil or fuel. Do not store, spill or use gasoline near an open flame.

IMPORTANT: WHEN OPERATING IN TEMPERATURES BELOW32°F(0°C), USE FRESH, CLEAN WINTER GRADE GASOLINE TO HELP INSURE GOOD COLD WEATHER STARTING.

CAUTION: Alcohol blended fuels (called gasohol or using ethanol or methanol) can attract mois- ture which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage. To avoid engine problems, the fuel system should be emptied before storage of 30 days or longer. Drain the gas tank, start the engine and let it run until the fuel lines and carburetor are empty. Use fresh fuel next season. See Storage Instructions for additional information. Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents LT1538 IV. Service General OperationII. Slope Operation III. ChildrenSafe Operation Practices for Ride-On Mowers Table of Contents Unassembled Parts Steering Wheel SeatAssembly Tools Required for AssemblyHOW to SET UP Your Tractor To Remove Tractor from CartonDischarging Check Tire Pressure Check Deck LevelnessCheck for Proper Position of ALL Belts Check Brake SystemOperation Know Your Tractor HOW to USE Your Tractor Before Starting the Engine Mowing Tips To Start Engine See FigMulching Mowing Tips Maintenance Service DatesGeneral Recommendations Before Each USETractor Brake OperationTires Operator Presence SystemBattery EngineBelts Transaxle CoolingClean AIR Screen Clean AIR INTAKE/COOLING AreasAIR Filter See Fig Engine OIL FilterCleaning MufflerSpark Plugs IN-LINE Fuel Filter See FigService and Adjustments To Install Mower See FigTo Remove Mower See Fig To Level Mower Housing Belt InstallationTo Replace Mower Blade Drive Belt See Fig Belt RemovalTo Check and Adjust Brake See Fig To Adjust BrakeTo Replace Motion Drive Belt See Fig To Check BrakeTo Adjust Steering Wheel ALIGN- Ment Transaxle Gear Shift Lever NEU- TralFront Wheel TOE-IN/CAMBER To Adjust Carburetor To Replace Headlight BulbInterlocks and Relays To Replace FuseStorage OtherFuel System Engine OILTroubleshooting Points OFF Schematic Tractor - Model NO. LT1538 LT1538A, Product no 56Electrical KEY Part Description Chassis and Enclosures Repair Parts Drive KEY Part NO. NO. Description Steering Assembly Repair Parts Seat Assembly 532 14 SeatDecals Wheels & TiresEngine KEY Part NO. NO. Description Mower Deck KEY Part Description Mower Lift Repair Parts Page Page Warranty Statement Suggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across Hill Degrees MAX532 18 43-98 11.12.02 RH

LT1538 specifications

The Husqvarna LT1538 is a robust garden tractor designed for homeowners who seek efficiency and comfort while maintaining their lawns. Equipped with a powerful 15 HP engine, the LT1538 delivers reliable performance, ensuring that mowing and other tasks are handled with ease. This garden tractor stands out due to its impressive combination of features, technologies, and user-friendly characteristics.

One of the key features of the LT1538 is its 38-inch cutting deck, which allows for precise and efficient mowing of medium-sized lawns. The deck comes with a spring-assisted lifting mechanism, making it easy to adjust cutting heights from 1 to 4 inches. This flexibility ensures that users can achieve the desired grass length easily, adapting to different lawn conditions and personal preferences.

The Husqvarna LT1538 also integrates an innovative air induction technology that enhances grass lift, resulting in an even cut every time. This technology promotes better airflow, allowing the mower to handle damp grass more effectively. Coupled with the sharp, durable blades, it ensures that your lawn is left looking pristine after each mowing session.

Another significant aspect of the LT1538 is its user-friendly controls and ergonomic design. The comfortable seat with adjustable options provides ample support for extended mowing sessions. The intuitive dashboard houses essential controls, including an easy-to-read fuel gauge and cutting height adjustment, making operation straightforward for users of all experience levels.

For ease of operation, the LT1538 features an automatic transmission, allowing users to navigate various terrains without constant gear shifting. This system enables smooth acceleration and deceleration, taking the stress out of mowing and making it an enjoyable experience.

Furthermore, the Husqvarna LT1538 is designed with durability in mind. Its rugged frame and durable components ensure longevity even when faced with regular use. The mower also includes a washout port for effortless deck cleaning, helping to maintain performance and prolong the life of the blades.

In summary, the Husqvarna LT1538 garden tractor combines power, efficiency, and ease of use, making it a standout choice for homeowners. With its reliable engine, advanced cutting technology, ergonomic design, and robust construction, the LT1538 is well-equipped to handle a variety of mowing tasks, ensuring that your lawn remains well-groomed with minimal effort.
Top Page Image Contents