TRACTOR - - MODEL NUMBER 2246LS (96043004300), PRODUCT NO. 960 43 00-43
ENGINE
KEY | PART | |
NO. | NO. | DESCRIPTION |
1 | - - - - - - | Engine Briggs & Stratton Model |
| | No. 40H777 |
2 | 532 14 97-23 | Muffler |
9 | 532 19 43-20 Keeper Belt Engine |
11 | 532 40 00-08 | Clutch |
12 | 532 40 50-97 | Pulley Engine |
15 | 532 40 74-89 | Tank Fuel |
18 | 532 19 77-25 | Cap Asm |
20 | 532 17 83-85 | Control Throttle |
21 | 532 41 63-58 Screw #10 x .750 BOS Thread |
22 | 532 19 15-96 | Choke Control |
28 | 532 40 11-37 | Fuel Line |
29 | 532 13 71-80 Spark Arrester Kit |
31 | 532 14 50-06 Clip Push-in Hinged |
37 | 532 12 34-87 | Clamp Hose |
41532 12 61-97 Washer 1-1/2 OD x 15/32 ID x .250
42810 04 07-00 Washer Lock 7/16
45 | 873 51 04-00 | Nut Keps Hex 1/4-20 unc |
62 | 532 14 66-29 | Heat Shield |
69 | 532 16 53-91 | Gasket |
70532 15 99-55 Tube Exhaust LH
71532 16 05-89 Exhaust Tube RH
79 | 532 18 39-06 | Screw Socket HD 5/16-18 x 1 |
81 | 532 14 84-56 | Tube Drain Oil Easy |
82 | 532 18 16-54 | Plug Drain Oil |
84817 06 06-20 Screw 3/8-16 x 1-1/4
85532 17 39-37 Bolt Hex 7/16-20 x 4 x Gr. 5-1.5 Thr
86 | 532 18 43-62 | Nut M8 - 1.25 |
87 | 537 17 18-77 Bolt 5/16-18 unc x 3/4 w/Sems |
90 | 817 00 06-16 | Screw 3/8-16 x 1 |
96 | 819 09 14-16 | Washer |
97 | 817 67 04-12 | Screw |
NOTE: All component dimensions given in U.S. inches 1 inch = 25.4 mm
For engine service and replacement parts, call the toll free number for your engine manufacturer listed below:
Briggs & Stratton | 1-800-233-3723 |
Engine Power Rating Information
The gross power rating for individual gas engine models is labeled in accordance with SAE (Society of Automotive Engi- neers) code J11940 (Small Engine Power & Torque Rating Procedure), and rating performance has been obtained and corrected in accordance with SAE J1995 (Revision 2002-5). Actual gross engine power will be lower and is affected by, among other things, ambient operating conditions and engine-to-engine variability. Given both the wide array of prod- ucts on which engines are placed and the variety of environmental issues applicable to operating the equipment, the gas engine will not develop the rated gross power when used in a given piece of power equipment (actual “on-site” or net horsepower). This difference is due to a variety of factors including, but not limited to, accessories (air cleaner, exhaust, charging, cooling, carburetor, fuel pump, etc.), application limitations, ambient operating conditions (temperature, humid- ity, altitude), and engine-to-engine variability. Due to manufacturing and capacity limitations, Briggs & Stratton may sub- stitute an engine of higher rated power for this Series engine.