Husqvarna GTH2454T owner manual Check Tire Pressure, Check Deck Levelness, Check Brake System

Page 9

ASSEMBLY

M

FIG. 12

•Engage belt tension rod (K) on locking bracket (L).

CAUTION: Belt tension rod is spring loaded. Have a tight grip on rod and en- gage slowly.

•Raise attachment lift lever to highest position.

•If necessary, adjust gauge wheels before operating mower as shown in the Operation section of this manual.

CHECK TIRE PRESSURE

The tires on your tractor were overinflated at the factory for shipping purposes. Correct tire pressure is important for best cutting performance.

•Reduce tire pressure to PSI shown on tires.

CHECK DECK LEVELNESS

For best cutting results, mower housing should be properly leveled. See “TO LEVEL MOWER HOUSING”in the Service and Adjustments section of this manual.

CHECK FOR PROPER POSITION OF ALL BELTS

See the figures that are shown for replacing motion and mower blade drive belts in the Service and Adjustments section of this manual. Verify that the belts are routed correctly.

CHECK BRAKE SYSTEM

After you learn how to operate your tractor, check to see that the brake is operating properly. See “TO CHECK BRAKE” in the Service and Adjustments section of this manual.

✓CHECKLIST

BEFORE YOU OPERATE YOUR NEW TRACTOR, WE WISH TO ASSURE THATYOU RECEIVE THE BEST PER- FORMANCE AND SATISFACTION FROM THIS QUALITY PRODUCT.

PLEASE REVIEW THE FOLLOWING CHECKLIST:

✓All assembly instructions have been completed.

✓No remaining loose parts in carton.

✓Battery is properly prepared and charged.

✓Seat is adjusted comfortably and tightened securely.

✓All tires are properly inflated. (For shipping purposes, the tires were overinflated at the factory).

✓Be sure mower deck is properly leveled side-to-side/ front-to-rear for best cutting results. (Tires must be properly inflated for leveling).

✓Check mower and drive belts. Be sure they are routed properly around pulleys and inside all belt keepers.

✓Check wiring. See that all connections are still secure and wires are properly clamped.

✓Before driving tractor, be sure freewheel control is in “transmission engaged” position (see “TO TRANS- PORT” in the Operation section of this manual).

WHILE LEARNING HOW TO USE YOUR TRACTOR, PAY EXTRA ATTENTION TO THE FOLLOWING IMPORTANT ITEMS:

✓Engine oil is at proper level.

✓Fuel tank is filled with fresh, clean, regular unleaded gasoline.

✓Become familiar with all controls, their location and function. Operate them before you start the engine.

✓Be sure brake system is in safe operating condition.

✓Be sure Operator Presence System and Reverse Op- eration System (ROS) are working properly (See the Operation and Maintenance sections in this manual).

✓It is important to purge the transmission before oper- ating your tractor for the first time. Follow proper start- ing and transmission purging instructions (See “TO START ENGINE” and “PURGE TRANSMISSION” in the Operation section of this manual).

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents GTH2454T Safe Operation Practices for Ride-On Mowers Safety RulesGeneral Operation II. Slope OperationGeneral Service ServiceIII. Children IV. TowingTable of Contents Mower Mower Front Wheel Unassembled PartsTools Required for Assembly AssemblyTo Remove Tractor from Carton Unpack CartonFirst Install ANTI-SWAY BAR S Install Mower and Drive Belt7/16 Check Deck Levelness Check Tire PressureCheck for Proper Position of ALL Belts Check Brake SystemOperation Know Your Tractor Stopping HOW to USE Your TractorTo Adjust Gauge Wheels See Fig To Adjust Mower Cutting Height See FigTo Operate Mower Reverse Operation System ROSBefore Starting the Engine Service REMINDER/HOUR MeterTo Operate on Hills To Transport See FigsTo Start Engine See Fig ADD GasolinePurge Transmission Automatic Transmission Warm UPMowing Tips Maintenance Lubrication ChartBefore Each USE Tractor BatteryBrake Operation TiresEngine Muffler CleaningSpark Plugs IN-LINE Fuel Filter See FigTo Install Mower Service and AdjustmentsTractor See Fig To Remove MowerTurn nut right Turn nut left To raise mower To Replace Motion Drive Belt See Fig To Replace Mower Blade Drive Belt See FigReplacing Battery See Fig To Start Engine with a Weak Battery See FigTo Check Brake Front Wheel TOE-IN/CAMBERTo Adjust Choke Control To Adjust Throttle Control CableTo Adjust Carburetor To Replace Headlight BulbOther StorageFuel System Engine OILProblem Cause Correction Troubleshooting PointsEngine dies when Tractor Model NO. GTH2454T 96043002300, Product no 43 SchematicElectrical KEY Part NO. NO. Description Chassis KEY Part Description Drive 211 532 19 62-12 Bushing Steering Assembly Engine Spark Arrester KITSeat Assembly Wheels and Tires DecalsMower Deck Tractor Model NO. GTH2454T 96043002300, Product no 43 Mower Lift Suggested Guide for Sighting Slopes for Safe Operation Warranty Statement

GTH2454T specifications

The Husqvarna GTH2454T is a robust and versatile lawn tractor designed specifically for homeowners who require efficient lawn care and maintenance. This model exemplifies Husqvarna's commitment to innovation and quality, making it a popular choice for residential landscapers and gardening enthusiasts alike.

One of the standout features of the GTH2454T is its powerful 24 HP Briggs & Stratton Intek V-Twin engine, which delivers ample power for a variety of mowing conditions. This dual-cylinder engine is designed to provide smooth operation and high torque, ensuring that users can tackle even the toughest mowing tasks with ease. The hydrostatic transmission offers seamless speed control, allowing for precise adjustments while navigating different terrains or executing sharp turns.

The cutting deck on the GTH2454T is 54 inches wide, offering an efficient mowing experience by reducing the number of passes needed to cover large areas. The deck is reinforced with a durable design that withstands the rigors of regular use, and it features an adjustable cutting height, enabling users to customize their mowing height to match their lawn’s specific needs. This flexibility contributes to healthier grass growth and overall aesthetic appeal.

Additionally, the GTH2454T incorporates advanced features such as a responsive steering system, which enhances maneuverability and allows for easy navigation around obstacles like trees and flower beds. The ergonomic seat design ensures comfort during extended periods of use, while the convenient controls are intuitively placed for easy access.

Another noteworthy aspect of the Husqvarna GTH2454T is its compatibility with various attachments, making it a multi-functional tool for yard maintenance. Users can equip it with accessories like baggers, snow plows, and carts to extend its usability throughout the year, transforming it into a reliable ally in different seasonal tasks.

With its combination of power, versatility, and comfort, the Husqvarna GTH2454T is not just a lawn mower but a comprehensive solution for maintaining beautiful outdoor spaces. It stands as a testament to Husqvarna’s expert engineering and dedication to providing tools that meet the evolving needs of modern homeowners. Whether it’s tackling thick grass, managing foliage, or preparing for winter snow, the GTH2454T is an investment that can enhance any lawn care routine.
Top Page Image Contents