UNPACKING INSTRUCTIONS
•Remove all parts and packing materials from carton.
•Check carton contents against list. Be sure all parts are there.
TOOLS REQUIRED
• | ½" Wrench (2) | • | 9/16" Wrench (2) |
• | 7/16" Wrench (2) | • | Ft/Lbs Torque Wrench |
•9/16" Socket and Ratchet
•Standard Screwdriver
PARTS IDENTIFICATION
COVER ASSEMBLY
BAG CONTAINERS 
CONTAINER CONTENTS
2 | - Soft bag containers | 1 | - Bag of Hardware |
1 | - Hose | 1 | - Inlet |
1 | - Lower chute | 1 | - Cover Assembly |
2 | - High Lift Blades |
|
|
HOSE
LOWER CHUTE
NOTE: When right hand (RH) and left hand (LH.) are mentioned in this manual, it means when seated on the mower in the operator’s position.
WARNING
BEFORE ASSEMBLING GRASS CATCHER TO MOWER
•Place motion control levers in “NEUTRAL” position.
•Set parking brake.
•Turn ignition key “OFF” and remove key.
•Make sure the blades and all moving parts have completely stopped.
•Disconnect spark plug and place wire where it cannot come in contact with plug.
7