ASSEMBLY
5CONTAINER INSTALLATION
1.Install containers on support frame, overlapping containers at center tube.
Note: One container should always overlap the other container at the center tube.
2.Close cover and lock latch handle over support tubes.
Latch Handle
Support Frame
6LOWER CHUTE INSTALLATION
1.Raise and hold deflector shield in upright position.
2.Fit lower chute as shown and hook rear latch to mower deck.
3.Align the bracket slot on lower chute with the deflector bracket tab on the mower deck. Slide chute down over tab.
4.With the lower chute in proper position, hold the chute securely while hooking the front latch to the mower deck.
NOTE: While hooking the latches, the deflector shield may try to push the chute away from the mower deck opening. It is important to hold the chute in position while hooking the latches to the mower deck.
Deflector
Shield
Deflector
Bracket
Tab
Front Latch
Rear Latch
Attach Rear Latch here
WARNING
DO NOT operate mower unless container is properly installed. Container is subject to wear and deterioration, check containers frequently, replace when cracked or damaged. Use only a recommended replacement container.
10