Husqvarna YTH2648TDRF owner manual DECK WASHOUT PORT See Fig, Maintenance

Page 19
DECK WASHOUT PORT (See Fig. 21)

MAINTENANCE

DECK WASHOUT PORT (See Fig. 21)

Your tractor’s deck is equipped with a washout port as part of its deck wash system. It should be utilized after each use.

1.Drive the tractor to a level, clear spot on your lawn, near enough to a water spigot for your garden hose to reach.

IMPORTANT: Make certain the tractor’s discharge chute is directed AWAY from your house, garage, parked cars, etc. Remove bagger chute or mulch cover if attached.

2.Make sure the attachment clutch control is in the “DISENGAGED” position, set the parking brake, and stop the engine.

3.Thread the nozzle adapter (packaged with your tractor’s Operator’s Manual) onto the end of your garden hose.

4.Pull back the lock collar of the nozzle adapter and push the adapter onto the deck washout port at the left end of the mower deck. Release the lock collar to lock the adapter on the nozzle.

HOSE

NOZZLE ADAPTER

WASHOUT

•Pluganyholesinmowerwithboltsandlocknuts.Manual backgroundPORT

Fig. 21

IMPORTANT: Tug hose ensuring connection is secure.

5.Turn the water on.

6.While sitting in the operator’s position on the tractor, re-start the engine and place the throttle lever in the Fast " " position.

IMPORTANT: Recheck the area to ensure the area is clear.

Ensure no children are in the area while cleaning the deck.

7.Move the tractor’s attachment clutch control to the “ENGAGED” position. Remain in the operator’s position with the cutting deck engaged until the deck is cleaned.

8.Move the tractor’s attachment clutch control to the “DISENGAGED” position. Turn the ignition key to the STOP position to turn the tractor’s engine off. Turn the water off.

9.Pull back the lock collar of the nozzle adapter to discon- nect the adapter from the nozzle washout port.

10.Move the tractor to a dry area, preferably a concrete or paved area. Place the attachment clutch control in the “ENGAGED” position to remove excess water and to help dry before putting the tractor away.

WARNING: A broken or missing washout fitting could expose you or others to thrownobjectsfromcontactwiththeblade.

Replace broken or missing washout fitting immediately, prior to using mower again.

Pluganyholesinmowerwithboltsandlocknuts.

19

Image 19
Contents 07002 YTH2648TDRFOwners Manual 532 44 40-19 RevSafe Operation Practices for Ride-On Mowers SAFETY RULESGENERAL SERVICE III. CHILDRENSAFE HANDLING OF GASOLINE SERVICE AND ADJUSTMENTS TABLE OF CONTENTSPRODUCT SPECIFICATIONS CUSTOMER RESPONSIBILITIESADJUST SEAT See Fig ASSEMBLYTOOLS REQUIRED FOR ASSEMBLY TO CHECK BATTERY See FigCHECK BRAKE SYSTEM CHECK TIRE PRESSURECHECK DECK LEVELNESS CHECK FOR PROPER POSITION OF ALL BELTSOPERATION KNOW YOUR TRACTOR TO USE THROTTLE CONTROL D See Fig.6 HOW TO USE YOUR TRACTORTO SET PARKING BRAKESee Fig STOPPING See FigK J L TO ADJUST MOWER CUTTING HEIGHT See FigTO ADJUST GAUGE WHEELS See Fig TO MOVE FORWARD AND BACKWARD See FigTO OPERATE ON HILLS SERVICE REMINDER/HOUR METERTO STOP MOWER BLADES REVERSE OPERATION SYSTEM ROSADD GASOLINE BATTERY INDICATOR/CHARGING PLUG See FigBEFORE STARTING THE ENGINE CHECK ENGINE OIL LEVELPURGE TRANSMISSION TO START ENGINE See FigMOWING TIPS SCHEDULE MAINTENANCEMAINTENANCE GENERAL RECOMMENDATIONSBLADE REMOVAL See Fig BATTERYTRACTOR BLADE CARETRANSAXLE PUMP FLUID TRANSAXLE MAINTENANCEENGINE V-BELTSENGINE COOLING SYSTEM CLEANINGCLEAN AIR SCREEN AIR FILTERPluganyholesinmowerwithboltsandlocknuts DECK WASHOUT PORT See FigA C D C D SERVICE AND ADJUSTMENTSTO INSTALL MOWER See Fig TO REMOVE MOWER See FigSERVICE AND ADJUSTMENTS TO LEVEL MOWER BELT ROUTING ENGINE BLADE BELT TO REPLACE MOWER BLADE DRIVE BELTTO CHECK BRAKE IDLER ARMTO REMOVE WHEEL FOR REPAIRS See Fig TO START ENGINE WITH A WEAK BATTERY See FigTO REPLACE MOTION DRIVE BELT See Fig FRONT WHEEL TOE-IN/CAMBERTO ADJUST THROTTLE CONTROL CABLE REPLACING BATTERY See FigTO REMOVE HOOD AND GRILL ASSEMBLY See Fig REMOVAL/REPLACEMENTENGINE OIL STORAGEOTHER FUEL SYSTEMCORRECTION TROUBLESHOOTINGPROBLEM CAUSEEngine continues to SERVICE NOTES KEY PART TRACTOR - MODEL NO. YTH2648TDRF 96041026400, PRODUCT NO. 960DECALS WHEELS AND TIRESIGNITION SWITCH SCHEMATICTRACTOR - MODEL NO. YTH2648TDRF 96041026400, PRODUCT NO. 960 41 PTO SWITCHWith Charge Indicator Option TRACTOR - MODEL NO. YTH2648TDRF 96041026400, PRODUCT NO. 960 41ELECTRICAL With Service Minder OptionPART chassis-texGT HUSQ II94r1 CHASSISPART drive-texK46pedal71r3 DRIVESpacer Split 532 13ENGINE SPARK ARRESTER KITEngine Power Rating Information steering-texTTR7 STEERING ASSEMBLYAxle Asm., Front 532 44 SEAT ASSEMBLYSeat   MOWER LIFT            48Felec-Tex5 MOWER DECKDESCRIPTION TRACTOR - MODEL NO. YTH2648TDRF 96041026400, PRODUCT NO. 960 41MOWER DECK PARTSERVICE NOTES SUGGESTED GUIDE FOR SIGHTING SLOPES FOR SAFE OPERATION ONLY RIDE UP AND DOWN HILL NOT ACROSS HILL 15 DEGREES MAXPrinted in the U.S.A 04.02.13 JM