Husqvarna ZTH manual Checking the Parking Brake, Checking the Blades, Adjusting the Mower Deck

Page 34

MAINTENANCE

Checking the Parking Brake

Visually check that no damage is found on the lever, links, or switch belonging to the parking brake. Perform a test drive and check that there is a braking effect.

To adjust the handbrake, contact the service workshop.

Checking the Blades

In order to attain the best mowing effect, it is important that the blades are well sharpened and not damaged.

Bent or cracked blades or blades with large nicks in shall be replaced.

Check the blade mounts.

IMPORTANT INFORMATION

The replacement or sharpening of blades ought to be carried out by an authorized service workshop.

Damaged blades should be replaced when hitting obstacles that result in a breakdown. Let the service workshop decide whether the blade can be repaired/ground or must be discarded.

Adjusting the Mower Deck

Contact an authorized service workshop.

Cleaning and Washing

Regular cleaning and washing, especially under the mower deck, will increase the machine’s lifespan. Make it a habit to clean the machine directly after use, before the dirt sticks.

8011-511

The parking brake in the disengaged position

8011-604

Check the blades

8011-514

Cleaning

English-32

Image 34
Contents ZTH EnglishPage Contents OPERATOR’S Manual Rider ZTHEnglish-2 Introduction IntroductionGood Service Manufacturing NumberSymbols and Decals Symbols and DecalsXxxxxxx xxxx xxxxxxxx xxx Xxxx xxxxxx Safety Instructions Safety InstructionsGeneral Use Personal protective equipment Driving on Slopes Do as followsMaintenance ChildrenEnglish-10 Transport Presentation PresentationControl Locations Ignition Lock Choke ControlThrottle Control Hour MeterParking Brake Engaging the Mower DeckSeat Locking Device Adjusting the Seat Steering ControlsFuel Tap RefuelingFuses Accessories Lifting Lever for the Mower DeckBefore Starting RunningRunning Starting the EngineMove the throttle to the middle position Open the fuel tap for the selected fuel tank Running Mower deck’s anti-scalp rollers shall be evenly adjusted Mowing Tips Stopping the Engine Moving by HandMaintenance MaintenanceMaintenance Schedule = Described in this manual = Not described in this manual Checking the Safety System Ignition SystemSafety system Checking and Adjusting the Choke Cable Checking and Adjusting the Throttle CableChecking the Engines Cooling Air Intake Replacing the Air Filter Checking the Fuel Pump’s Air Filter Replacing the Fuel FilterChecking Tire Pressures Checking the Parking Brake Adjusting the Mower DeckCleaning and Washing Checking the BladesLubrication LubricationLubrication Schedule Hydraulic System, Oil Level Lubricating the CablesLubricating in Accordance with the Lubrication Schedule Changing Oil and FiltersEngine Oil Changing the Engine Oil Checking the Oil LevelThrottle and Choke Cables, Lever Bearings Dipstick markingsFront Wheel Mount Belt Adjuster, Mower DeckFront Wheel Bearings Mower Deck Struts Steering Control ShaftsBrake Arms Belt Adjuster, Hydraulic Pumps Trouble Shooting Guide Trouble Shooting GuideProblem Cause English-41 English-42 Storage ServiceStorage Winter StorageMeas., Weights, Etc ZTH5223 ZTH6125 Technical DataTechnical Data EngineTransmission Noise Emissions and Cutting WidthElectrical System Mower DeckDelivery Service Service JournalService Journal ActionAction Date, mtr reading, stamp, sign Hour Service English-49 English-50 English-51 At Least Once Each Year English-53 English-54 English-55 ´+Hh¶6¨ Page 114 00 2002W14