Husqvarna ZTH manual Steering Control Shafts, Mower Deck Struts, Brake Arms

LUBRICATION

9. Steering Control Shafts

Tip the driver’s seat.

Lubricate with a grease gun, 1 nipple for each steering control shaft, until the grease is forced out.

Use only good quality molybdenum disulphide grease.

Grease from well-known brand names (petrochemical companies, etc.) usually maintains a good quality.

10. Mower Deck Struts

Lubricate with a grease gun, 1 nipple for each strut, until the grease is forced out.

Use only good quality molybdenum disulphide grease.

Grease from well-known brand names (petrochemical companies, etc.) usually maintains a good quality.

11. Brake Arms

Remove one rear wheel at a time (four screws).

Lubricate with a grease gun, 1 nipple for each brake arm, until the grease is forced out.

Use only good quality molybdenum disulphide grease.

Grease from well-known brand names (petrochemical companies, etc.) usually maintains a good quality.

IMPORTANT INFORMATION

Be spartan and remove excess lubricant so that is does not come into contact with the brake band.

8011-578

Lubricating the steering control shafts

8011-577

Lubricating struts

8011-579

Lubricating brake arms

English-38