wPrinting
Trimming the Image
Tilt correction
You can crop the image and print only the trimmed portion as if the image was recomposed. Do the trimming right before printing. If you set the trimming and then set the print settings, you may have to set the trimming again.
1On the print setting screen, select [Trimming].
2Set the trimming frame size, position, and aspect ratio.
The image area within the trimming frame will be printed. The trimming frame’s aspect ratio can be changed with [Paper settings].
Changing the trimming frame size
When you press the <u> or <I> button, the size of the trimming frame will change. The smaller the trimming frame, the larger the image magnification will be for printing.
Moving the trimming frame
Press the <S> key to move the frame over the image vertically or horizontally. Move the trimming frame until it covers the desired image area.
Rotating the frame
Pressing the <B> button will toggle the trimming frame between the vertical and horizontal orientations. This enables you to create a
Image tilt correction
By turning the <6> dial, you can adjust the image tilt angle up to ±10 degrees in
3Press <0> to exit the trimming.
X The print setting screen will reappear.
You can check the trimmed image area on the upper left of the print setting screen.
209