wPrinting
| 4 Set the printing effects. | |
| Set as necessary. If you need not set | |
| any printing effects, go to step 5. | |
| What is displayed on the screen | |
| differs depending on the printer. | |
| Select the option on the upper right | |
| (circled in the screenshot), then press | |
| <0>. | |
| Select the desired printing effect, then | |
| press <0>. | |
| If the <e> icon is displayed brightly | |
| next to <z>, you can also adjust | |
| the printing effect (p.208). | |
|
| |
Printing Effect | Description | |
EOn | The image will be printed according to the printer’s standard | |
colors. The image’s Exif data is used to make automatic | ||
| corrections. | |
EOff | No automatic correction will be applied. | |
EVIVID | The image will be printed with higher saturation to produce | |
more vivid blues and greens. | ||
| ||
ENR | Image noise is reduced before printing. | |
0B/W | Prints in | |
0Cool tone | Prints in | |
0Warm tone | Prints in | |
zNatural | Prints the image in the actual colors and contrast. No | |
automatic color adjustments are applied. | ||
| ||
zNatural M | The printing characteristics are the same as the “Natural” | |
setting. However, this setting enables finer printing | ||
| adjustments than with “Natural.” | |
EDefault | The printing will differ depending on the printer. For details, | |
see the printer’s instruction manual. | ||
|
*When you change the printing effects, it is reflected in the image displayed on the upper left. Note that the printed image might look slightly different from the displayed image which is only an approximation. This also applies to [Brightness] and [Adjust levels] on page 208.
206