XEditing a Movie’s First and Last Scenes
You can edit out the first and last scenes of a movie in
1 On the movie playback screen, select [X].
X The editing screen will be displayed.
2 Specify the part to be edited out. Select either [U] (Cut beginning) or [V] (Cut end), then press <0>.
Press the <U> key to see the previous or next frames. Holding it down will fast forward the frames. After deciding which part to edit out, press <0>. The portion highlighted in blue on the top of the screen is what will remain.
3 Check the edited movie.
Select [7] and press <0> to playback
the portion highlighted in blue.
To change the editing, go back to step 2. To cancel the editing, select [2] and press <0>.
4 Save the movie.
Select [W], then press <0>.
X The save screen will appear.
To save it as a new movie, select [New file]. To save it and overwrite the original movie file, select [Overwrite]. Then press <0>.
Since the editing is done in
[X]), the exact position where the movie is edited may differ slightly from the position you specified.
If the card does not have enough room, [New file] will not be selectable. More movie editing functions are available with ZoomBrowser EX/ ImageBrowser (provided software, p.270).
188