3Manual Sensor CleaningN
If dust adhere to the image sensor and dust spots appear on the images, you can clean the image sensor yourself with a camera blower.
The surface of the image sensor is extremely delicate. If the sensor needs to be cleaned directly, having it done by a Canon Service Center is recommended.
Before cleaning the sensor, detach the lens from the camera.
1
2
3
4
Select [Clean manually].
Under the [6] tab, select [Clean manually], then press <0>.
Select [OK].
Select [OK], then press <0>.
XIn a moment, the reflex mirror will lockup and the shutter will open.
Clean the sensor.
End the cleaning.
Set the power switch to <2>.
For the power source, using AC Adapter Kit
If you use a battery, make sure it is fully recharged.
173